• The Bulletin of The Korean Astronomical Society
• /
• v.35 no.1
• /
• pp.40.1-40.1
• /
• 2010

The Main payload of the STSAT-3 (Korea Science & Technology Satellite-3), MIRIS (Multipurpose Infra-Red Imaging System) has been developed for last 3 years by KASI, and its Flight Model (FM) is now being developed as the final stage. All optical lenses and the opto-mechanical components of the FM have been completely fabricated with slight modifications that have been made to some components based on the Engineering Qualification Model (EQM) performances. The components of the telescope have been assembled and the test results show its optical performances are acceptable for required specifications in visual wavelength (@633 nm) at room temperature. The ensuing focal plane integration and focus test will be made soon using the vacuum chamber. The MIRIS mechanical structure of the EQM has been modified to develop FM according to the performance and environment test results. The filter-wheel module in the cryostat was newly designed with Finite Element Analysis (FEM) in order to compensate for the vibration stress in the launching conditions. Surface finishing of all components were also modified to implement the thermal model for the passive cooling technique. The FM electronics design has been completed for final fabrication process. Some minor modifications of the electronics boards were made based on EQM test performances. The ground calibration tests of MIRIS FM will be made with the science grade Teledyne PICNIC IR-array.

• Journal of the Korean Chemical Society
• /
• v.33 no.4
• /
• pp.337-342
• /
• 1989

Gasless combustion is a vigorous exothermic reaction ignited directly in solid mixture, similar to Thermit reaction. The gasless combustion synthesis has the advantages of rapid processing, energy saving, low processing cost, and high purity of products. The Ti$Si_x$(x = 0.6, 0.8, 1.0, 2.0) systems are prepared by the gasless combustion synthesis without external sintering process. The crystallographic structures of $Ti_5Si_3$, $Ti_5Si_4$ are hexagonal and tetragonal system, respectively. Those of TiSi, $TiSi_2$ are orthorhombic systems. The results of X-ray analysis agree with the JCPDS data. The combustion modes of all combustion reactions are steady state combustions, and the propagation velocities of the combustion waves of $Ti_5Si_3$, $Ti_5Si_4$ and TiSi are greater than 0.6 cm/sec and that of $TiSi_2$ is 0.28 cm/sec.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.15 no.3
• /
• pp.1740-1748
• /
• 2014

In this paper, we propose an RBAC based personalized health care service platform in order to provide smart management of personal health record using smart devices. It helps to guide healthful service and provide useful information according to one's individual health record. Personalized health care services platform supports a healthy lifestyle by measuring personal health information in a hospital clinical, imaging, and drug data, as well as that can be obtained from smart devices. Everyone can enter his health related data in everyday life such as food, sleeping time, mood, movement and exercise so that one can manage his personal health information of modern smart features. In addition, if necessary, personal health information can be provided to the hospital information system and staff with the consent of the individual. It can be contributed to simplify the complex process for remote medical. The proposed platform, which applies role based access control model to protect security and privacy, supports a smart health care services for users by providing personalized health care services through the smart applications.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.34 no.3
• /
• pp.955-963
• /
• 2014

The objective of this study is to identify ways to resolve conflicts arising from building new roads or expanding existing roads by introducing negotiation techniques to the Jeju government. A case of city planning (Jungjeong-ro, Seogwipo City, Jeju Special Self-Governing Province) was analyzed in this study in an aspect of negotiation. In the case, the Committee for Promoting and Vitalizing Jungjeong-ro conducted negotiations from February, 2011 to December, 2011. This study proposes ways to establish systems which resolve problems during negotiation processes and frame concepts related to negotiation in the overall administrative systems. Firstly, setting up a negotiation management team within the provincial office and supporting it fully is needed. Secondly, there should be a process in which decisions made by the negotiation team become authoritative. Thirdly, for smooth negotiation processes, it is necessary to formulate ground rules and make negotiating parties obey them thoroughly. Fourthly, a negotiation clinic team should be established at the Jeju provincial government. Fifthly, there should be a negotiation school within the framework of human resources development. Sixthly, If officials do their negotiation jobs positively, a reward system should be established to give them adequate rewards. Lastly, concept of negotiation should take root in administration in general.

• Journal of Biosystems Engineering
• /
• v.11 no.2
• /
• pp.55-65
• /
• 1986

The resistance to the passage of airflow through various agricultural products is an important consideration in the design of an aeration or drying system. The amount of resistance to airflow varied widely from one kind of grain to another, and depended upon airflow rate, surface texture and shape of the particles, the size and configuration of voids, and foreign and fine material in the grain bed. The airflow rate was the major factor considered on this kind of study in the early stages. But these days, the studies on the resistance to airflow of grain affected by grain moisture content and foreign and fine material have been widely carried out. However the foreign an fine material in the grain bed could not be a major factor on the study in Korea because there were only a few grain process procedure after harvesting it. The objectives of this study were to investigate the effect of moisture content and airflow rate on airflow resistance to grain, and to develop a model to predict the static pressure drop across the grain bed as a function of moisture content and airflow rate. The rough rice varieties, Akibare, Milyang 15 (Japonica types), Samkwang, Backyang (Indica types)and covered barley variety, Olbori, which were harvested in 1985 were used in the experiment after cleaning them. Resistances to airflow of grain were investigated at four levels of moisture content (13-25%, wb.) for ten different airflow rates($0.01-0.15m^3/sm^2$). The results of this study are summarized as follows; 1. Theaverage bulk densities were $585.3kg/m^3$ for rough rice and $691.6kg/m^3$ for barley at the loose fill, and were $648.8kg/m^3$ for rough rice and $758.2kg/m^3$ for barley at the packed fill. The pressure drops at the packed fill beds were approximately 1.4 to 1.8 times higher than those at the loose fill beds. 2. The pressure drops across grain beds deceased with the increase of moisture content and increased with airflow rate. The decreasing rates of pressure drop across grain beds according to the moisture contents at the lower airflow rates were higher than those at the higher airflow rates, and the increasing rates of pressure drop according to the airflow rates at the lower moisture contents were higher those at higher moisture contents. 3. The pressure drop across barley bed were much higher than rough rice beds and the pressure drops across Japonica type rough rice beds were a little higher than Indica type. 4. The mathematical models to predict the pressure drop across grain beds as a function of moisture content and airflow rate were developed from these experiments.

• Journal of Energy Engineering
• /
• v.21 no.2
• /
• pp.119-123
• /
• 2012

Although LNG storage tanks are very delicate with chloride attack owing to its operating inshore location, specific integrity management system for chloride attack has not been studied so far. As the design warranty life time, about 25 years, has come, to prevent paying huge amount of construction cost and required resources for new alternative storage tanks and manage the life time of operating storage tanks, the basic data of chloride attack is necessary. This study intended to build up basic data for following detailed study to develop technologies for life time management of LNG storage tanks, NT Build 492 method in North Europe was used to test chloride diffusion coefficient for the newly-constructing concrete outer tank. Results of these tests lead us to the conclusion that 90 days diffusion coefficients show 46% of 28 days' due to a large quantity of fly ash mixing and much similar to estimation from concrete process table. It seems resonable to conclude that 90 days specimens are recommended estimating the chloride diffusion coefficient for LNG storage tanks to enhance the reliabilities.

• Journal of Energy Engineering
• /
• v.28 no.4
• /
• pp.82-93
• /
• 2019

In this study, a new model is proposed to improve the problem of the decline of predict rate of heat demand on a particular date, such as a public holiday for the conventional heat demand forecasting system. The proposed model was the Four Season Mixed Heat Demand Prediction Neural Network Model, which showed an increase in the forecast rate of heat demand, especially for each type of forecast date (weekday/weekend/holiday). The proposed model was selected through the following process. A model with an even error for each type of forecast date in a particular season is selected to form the entire forecast model. To avoid shortening learning time and excessive learning, after each of the four different models that were structurally simplified were learning and a model that showed optimal prediction error was selected through various combinations. The output of the model is the hourly 24-hour heat demand at the forecast date and the total is the daily total heat demand. These forecasts enable efficient heat supply planning and allow the selection and utilization of output values according to their purpose. For daily heat demand forecasts for the proposed model, the overall MAPE improved from 5.3~6.1% for individual models to 5.2% and the forecast for holiday heat demand greatly improved from 4.9~7.9% to 2.9%. The data in this study utilized 34 months of heat demand data from a specific apartment complex provided by the Korea District Heating Corp. (January 2015 to October 2017).

• Journal of Internet Computing and Services
• /
• v.18 no.5
• /
• pp.17-22
• /
• 2017

In a MPC coding using excitation source of voiced and unvoiced, it would be a distortion of speech waveform. This is caused by normalization of synthesis speech waveform of voiced in the process of restoration the multi-pulses of representation section. This paper present PCFBD-MPC( Position Compensation Frequency Band Division-Multi Pulse Coding ) used V/UV/S( Voiced / Unvoiced / Silence ) switching, position compensation in a multi-pulses each pitch interval and Unvoiced approximate-synthesis by using specific frequency in order to reduce distortion of synthesis waveform. Also, I was implemented that the PCFBD-MPC( Position Compensation Frequency Band Division-Multi Pulse Coding ) system and evaluate the SNRseg of PCFBD-MPC in coding condition of 8kbps. As a result, SNRseg of PCFBD-MPC was 13.4dB for female voice and 13.8dB for male voice respectively. In the future, I will study the evaluation of the sound quality of 8kbps speech coding method that simultaneously compensation the amplitude and position of multi-pulse source. These methods are expected to be applied to a method of speech coding using sound source in a low bit rate such as a cellular phone or a smart phone.

• Journal of Biosystems Engineering
• /
• v.43 no.3
• /
• pp.247-254
• /
• 2018

Purpose: Although previous studies have performed on-farm evaluations for the control of airborne diseases such as foot-and-mouth disease (FMD) and influenza, disease control during the process of livestock and manure transportation has not been investigated thoroughly. The objective of this study is to predict common patterns of livestock-vehicle movement. Methods: Global positioning system (GPS) data collected during 2012 and 2013 from livestock vehicles on Jeju Island, South Korea, were analyzed. The GPS data included the coordinates of moving vehicles according to the time and date as well as the locations of livestock farms and manure-keeping sites. Data from 2012 were added to Esri software ArcGIS 10.1 and two approaches were adopted for predicting common vehicle-movement patterns, i.e., point-density and Euclidean-distance tools. To compare the predicted patterns with actual patterns for 2013, the same analysis was performed on the actual data. Results: When the manure-keeping sites and livestock farms were the same in both years, the common patterns of 2012 and 2013 were similar; however, differences arose in the patterns when these sites were changed. By using the point-density tool and Euclidean-distance tool, the average similarity between the predicted and actual common patterns for the three vehicles was 80% and 72%, respectively. Conclusions: From this analysis, we can determine common patterns of livestock vehicles using previous year's data. In the future, to obtain more accurate results and to devise a model for predicting patterns of vehicle movement, more dependent and independent variables will be considered.

• Korean Journal of Optics and Photonics
• /
• v.22 no.4
• /
• pp.191-197
• /
• 2011

In this paper, we have designed an integrated triplexer which is the basic component for a FTTH(Fiber To The Home) system which can transmit CATV and voice/data at the same time in a single fiber. The integrated triplexer can be fabricated with a novel technique of "Micro-Block Stacking (MBS)" method which automatically aligns the optical components in the optical beam pass using accurate ceramic holders. We analyze the displacement of the optical focus according to the tolerances of the component dimensions and the assembly process using code V simulator. For the transmitter, the most serious shift of the focal points is caused by the displacements of the LD spot. So the focal point moves up to $72{\mu}m$ from the center point for ${\pm}25{\mu}m$, ${\pm}25{\mu}m$, ${\pm}30{\mu}m$ displacements. For the receiver the most serious shift of the focal points is caused by the displacements of a 0.8mm ball lens (for the analog receiving part) and a micro ball lens (for the digital receiving part), and the focal point moves up to $55{\mu}$ for ${\pm}55{\mu}m$, ${\pm}5{\mu}m$, ${\pm}55{\mu}m$ micro ball lens displacements.