• Journal of the Korean Society for information Management
• /
• v.34 no.3
• /
• pp.251-267
• /
• 2017

This study aimed to analyze open access features of 1,890 Korean scientific journals registered in the Korea Citation Index (KCI). To this end, this study classified open access features of the target scientific journals into two main aspects, free access and free redistribution. The analysis results indicated that the target scientific journals had strong free access aspects. Based on websites, 67% of the target scientific journals allowed for free access without a login process and based on free database, 48% provided free access. On the other hand, the target scientific journals had weaker free redistribution aspects compared to their free access aspects. Only 14% of them offered the CC (creative commons) license. Another finding was that there were clear differences in open access aspects by academic field. Medicine, pharmacy, natural science, agriculture, fisheries, oceanography, and engineering had stronger open access aspects than humanities, sociology, arts, physical education, and interdisciplinary science. It appears that the difference was caused by the presence or absence of organizations supporting distribution of scientific journals of the fields concerned. To narrow the gap, it is recommended that the open access governance system is established to set up open access policies for Korean scientific journals regardless of academic fields and to support them.

• Journal of the Korean Society of Surveying, Geodesy, Photogrammetry and Cartography
• /
• v.31 no.5
• /
• pp.343-353
• /
• 2013

Recently, the landscape change by development has become more important and it's been stipulated that environmental effects evaluation must include LIA which reflects the said issue. Even though the selection of viewpoints which have the biggest impact on LIA result is stipulated in accordance with related rules, the criteria are inconsistent. Therefore, LIA experts' or project developers' subjective opinions have been very influential. In this case, wrong viewpoints which do not meet the selection criteria could be selected based on a discretionary interpretation on them, which could in turn substantially reduce an accuracy and reliability of the LIA results. Therefore, this research suggested the reverse-viewshed frequency technique as method that can be verified accuracy and reliability of viewpoints. And it has comparatively analyzed effective viewpoints using reverse-viewshed frequency analysis on viewpoints which were selected for LIA. As a result, the average validity was just 58% of total viewpoints used in construction sites. And the validity of viewpoints decreased as viewshed frequency increased. Based on results above, it was able to verify that the unreasonable points of a substantial proportion have been used as viewpoints in LIA process.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.19 no.8
• /
• pp.176-182
• /
• 2018

One of the most important factor of esthetic prosthesis is the color of the teeth. Zirconia is produced in the process of design, milling, coloring, drying, and sintering. The effect of the drying degree of zirconia colorant on the color tone is examined. For the experiment, a total of 45 zirconia specimens(15 for each) were fabricated by using cad/cam system. The zirconia specimens(L block(LAZOR), Z block(Zircos-E block posterior), A block(AlphaZ)) were then subjected to zirconia sintering in accordance with the manufacturer's instructions, using a chemical coloring agent to Non-drying(0sec), intermediate (10sec), and completely dried (10min) temperature holding times. The color tone was measured using a spectrophotometer. The results were analyzed with a One-way analysis of variance and the Tukey post-hoc test (${\alpha}=.05$) The $L^*$ values of L, A specimens, $a^*$ values of A specimens, and $b^*$ values of Z specimens were not statistically different according to the degree of drying (p>0.05), While the $L^*$ value of Z specimen, $a^*$ value of L, Z specimen, $b^*$ values of L, A specimens were statistically different according to the degree of drying(p <0.05). In conclusion, the drying of zirconia colourants improves zirconia brightness and increases the optical properties of the enamel.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.19 no.10
• /
• pp.101-107
• /
• 2018

Recently, Korea's defense industry has advanced highly, and defense R&D budget is gradually increasing in defense budget. However, without objective analysis of defense industry technology, effective defense R&D activities are limited and defense budgets can be used inefficiently. Therefore, in addition to analyzing the defense industry technology quantitatively reflecting the opinions of the experts, this paper aims to analyze the defense industry technology objectively by quantitative methods, and to make efficient use of the defense budget. In addition, we propose a patent analysis method to grasp the characteristics of the defense industry technology and the vacant technology objectively and systematically by applying the big data analysis method, which is one of the keywords of the 4th industrial revolution, to the defense industry technology. The proposed method is applied to the technology of the firepower industry among several defense industrial technologies and the case analysis is conducted. In the process, the patents of 10 domestic companies related to firepower were collected through the Kipris in the defense industry companies' classification of the Korea Defense Industry Association(KDIA), and the data matrix was preprocessed to utilize IPC codes among them. And then, we Implemented association rule mining which can grasp the relation between each item in data mining technique using R program. The results of this study are suggested through interpretation of support, confidence lift index which were resulted from suggested approach. Therefore, this paper suggests that it can help the efficient use of massive national defense budget and enhance the competitiveness of defense industry technology.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.21 no.2
• /
• pp.634-643
• /
• 2020

In this study, the rheological and tribological properties of urea grease were studied according to the type and amount of polytetrafluoroethylene (PTFE) powders added to the urea grease, which is the most widely used among solid lubricants, to develop an optimal lubrication system. Urea grease was synthesized using 4,4'-methylenebis(phenyl isocyanate)(MDI), oleylamine, and cyclohexylamine, and PTFE powders prepared by dispersion or suspension polymerization process were then added. The basic rheological and tribological properties of the prepared greases were compared. The worked penetration numbers of urea grease decreased with increasing amount of PTFE powders, but both PTFE powders caused no significant changes in heat resistance and copper corrosion resistance. The shear viscosity increased with increasing PTFE powder content, and the dispersion-type PTFE powder was more effective in increasing the viscosity. In the value of the loss coefficient = 1, the shear stress was higher for the grease containing PTFE powders than the non-PTFE added grease, and the dispersion-type PTFE-added grease showed higher viscosity than the suspension-type PTFE-added grease. Finally, urea grease was found to have a low-performance improvement in terms of wear reduction effects by adding PTFE powders, but the load-bearing performance was up to 2.5 times higher for the dispersion-type PTFE and five times higher for the suspension-type PTFE.

• Microbiology and Biotechnology Letters
• /
• v.36 no.1
• /
• pp.12-20
• /
• 2008

Validation of viral safety is essential in ensuring the safety of mammalian cell culture-derived biopharmaceuticals, because numerous adventitious viruses have been contaminated during the manufacture of the products. Mammalian cells are highly susceptible to minute virus of mice(MVM), and there are several reports of MVM contamination during the manufacture of biopharmaceuticals. In order to establish the validation system for the MVM safety, a real-time PCR method was developed for quantitative detection of MVM in cell lines, raw materials, manufacturing processes, and final products as well as MVM clearance validation. Specific primers for amplification of MVM DNA was selected, and MVM DNA was quantified by use of SYBR Green I. The sensitivity of the assay was calculated to be $6{\times}10^{-2}TCID_{50}/mL$. The real-time PCR method was proven to be reproducible and very specific to MVM. The established real-time PCR assay was successfully applied to the validation of Chinese hamster ovary (CHO) cell artificially infected with MVM. MVM DNA could be Quantified in CHO cell as well as culture supernatant. When the real-time PCR assay was applied to the validation of virus removal during a virus filtration process, the result was similar to that of virus infectivity assay. Therefore, it was concluded that this rapid, specific, sensitive, and robust assay could replace infectivity assay for detection and clearance validation of MVM.

• Journal of Korean Society of Environmental Engineers
• /
• v.29 no.2
• /
• pp.169-175
• /
• 2007

The Bio Best Bacillus(B3) and Rotating Activated Bacillus Contactor(RABC) processes, in which Bacillus strains are predominating, are reported to remove nitrogen and phosphorus as well as organic matter effectively. Nevertheless the nutrient removal characteristics of the Bacillus strains have not been studied in detail so far. This study investigated the organic and nutrient removal by Bacillus strains, Bacillus megaterium(KCTC 3007), Paenibacillus polymyxa(KCTC 3627), and Bacillus sp. A12, C21, F12, and L1(isolated from a B3 process), by incubating the strains in 0.2% nutrient broth at $30^{\circ}C$. Burkholderia cepacia(KCTC 2966), a common activated sludge organism, was used as a reference species for comparison. Although the degradation rate was affected by the population sire, the specific removal rates of organic matter by Bacillus strains were greater by $2\sim5$ times than that of Burkholderia. In particular, the culture bottles inoculated with the endospores of Bacillus megaterium and Bacillus sp. C21, F12, and N12 showed significantly higher degradation rate than those of vegetative cells.

• Journal of the Korean Applied Science and Technology
• /
• v.35 no.3
• /
• pp.816-825
• /
• 2018

Recently, it was emerged to need the necessity of LPG residues management due to the finding some substances such as rust. This study is performed to investigate the characteristics of LPG residues in the production and distribution stage of LPG. For the qualitative analysis of LPG residues, it was operated to be set up the analysis conditions(the flow rate, etc) of GC-MS and was performed to analyze the component of LPG residues. From the analysis result using GC-MS, it was shown that the component of LPG residues was turned out the plasticizer to be used in the rubber manufacturing process. The inorganic components of LPG residues were analyzed using ICP-OES. At the results of inorganic analysis, it was shown that the Si element was detected, which was presumably derived from defoamers used mainly in the LPG production. Also, the P and Zn element, which are estimated to be components of grease additives used for filling facilities, were also partially detected. No trace of rusting was detected in the LPG residues in the production and distribution stages analyzed in this study. But, as plasticizers and grease additives can affect to the LPG fuel system in vehicles, it will be necessary to use the proper quality of rubber and to expand the use of low boiling grease additives.

• The Journal of the Korea Contents Association
• /
• v.20 no.5
• /
• pp.128-139
• /
• 2020

This study is a recognition type study on the usefulness of the field-practice program conducted by departments related to eating out and cooking. The purpose of this study is to derive the common types found among students who have experienced on-the-job training in special cases where the completion of on-the-job training programs, such as the Department of Culinary Arts and Engineering, are designated as graduation requirements and major required courses. By analyzing, we will explore and analyze the factors and issues that can affect the program participation process. As a result of recognition type analysis, a total of four types were derived, and each type was named according to its specificity as follows. Type 1 (N = 8): Sense of Purpose Setting type, Type 2 (N = 8): Interaction Skill Acquisition Types, Type 3 (N = 6): Major Practice Education Enlargement Type, Type 4 (N = 6): The Field Adaptability Improvement Type was analyzed for each unique feature type. Based on the results, it is suggested that efforts to systematize the field practice regulations, improve the government's field practice system plans, and discover new industries to provide opportunities for cultivating practical skills by supplementing the problems of the field practice regulations.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.18 no.11
• /
• pp.747-754
• /
• 2017

The Concrete-Filled Tube (CFT) system was developed for its excellent structural performance, such as its good stiffness, stress and ductility, which is derived from the mechanical advantages of its composite structure. However, it is known that the flat type of reinforcing plates need stiffeners placed at a certain distance from each other to avoid buckling failure, which increases the cost accordingly. This paper investigates the contribution of the rib elements placed inside the steel tube for the purpose of increasing the bond strength between the steel and concrete and fire performance with no additional protection. The test results also demonstrate the effectiveness of the corrugated rib's shape against fire. The results of this study showed that the buckling prevention and fire resistance performance criteria were satisfied by the application of the inner surface attachment rib, due to the resulting increase in the strength of the CFT column. Therefore, it is considered that the CFT method using the corrugated rib structure reinforcement developed through this study satisfies the structural and fire resistance performance criteria without the need for a refractory coating. Future studies will be needed to make the process efficient and economical for factory production.