• Nuclear Engineering and Technology
• /
• v.55 no.2
• /
• pp.452-459
• /
• 2023

The core power control is an important issue for the study of dynamic characteristics in China initiative accelerator driven subcritical system (CiADS), which has direct impact on the control strategy and safety analysis process. The CiADS is an experimental facility that is only controlled by the proton beam intensity without considering the control rods in the current engineering design stage. In order to get the optimized operation scheme with the stable and reliable features, the variation of beam intensity using the continuous and periodic control approaches has been adopted, and the change of collimator and the adjusting of duty ratio have been proposed in the power control process. Considering the neutronics and the thermal-hydraulics characteristics in CiADS, the physical model for the core power control has been established by means of the point reactor kinetics method and the lumped parameter method. Moreover, the multi-inputs single-output (MISO) logical structure for the power control process has been constructed using proportional integral derivative (PID) controller, and the meta-heuristic algorithm has been employed to obtain the global optimized parameters for the stable running mode without producing large perturbations. Finally, the verification and validation of the control method have been tested based on the reference scenarios in considering the disturbances of spallation neutron source and inlet temperature respectively, where all the numerical results reveal that the optimization method has satisfactory performance in the CiADS core power control scenarios.

• Nuclear Engineering and Technology
• /
• v.56 no.3
• /
• pp.880-885
• /
• 2024

For Safety Assisted Engineering works, real-time simulators have emerged as a mandatory tool among all the key actors involved in the nuclear industry (utilities, designers and safety authorities). EDF, Electricité de France, as the leading worldwide nuclear power plant operator, has a crucial need for efficient and updated simulation tools for training, operating and safety analysis support. This paper will present the work performed at EDF/DT to develop a new generation of engineering simulator to fulfil these tasks. The project is called SiRENE, which is the acronym of Re-hosted Engineering Simulator in French. The project has been economically challenging. Therefore, to benefit from existing tools and experience, the SiRENE project combines: - A part of the process issued from the operating fleet training full-scope simulator. - An improvement of the simulator prediction reliability with the integration of High-Fidelity models, used in Safety Analysis. These High-Fidelity models address Nuclear Steam Supply System code, with CATHARE thermal-hydraulics system code and neutronics, with COCCINELLE code. - And taking advantage of the last generation and improvements of instructor station. The intensive and challenging uses of the new SiRENE engineering simulator are also discussed. The SiRENE simulator has to address different topics such as verification and validation of operating procedures, identification of safety paths, tests of I&C developments or modifications, tests on hydraulics system components (pump, valve etc.), support studies for Probabilistic Safety Analysis (PSA). etc. It also emerges that SiRENE simulator is a valuable tool for self-training of the newcomers in EDF nuclear engineering centers. As a modifiable tool and thanks to a skillful team managing the SiRENE project, specific and adapted modifications can be taken into account very quickly, in order to provide the best answers for our users' specific issues. Finally, the SiRENE simulator, and the associated configurations, has been distributed among the different engineering centers at EDF (DT in Lyon, DIPDE in Marseille and CNEPE in Tours). This distribution highlights a strong synergy and complementarity of the different engineering institutes at EDF, working together for a safer and a more profitable operating fleet.

• The Journal of Society for e-Business Studies
• /
• v.23 no.1
• /
• pp.89-102
• /
• 2018

In this paper, the security characteristics of healthcare institutions were derived through analysis of previous research, and the characteristics and status of small and medium sized healthcare institutions were surveyed through field surveys of small and medium sized healthcare institutions. The security management evaluation model for small and medium sized healthcare institutions was designed and verified based on the security characteristics of small and medium healthcare institutions. For the design, we compared and analyzed existing security management system and evaluation certification system of healthcare institutions. We also confirmed the proposed security management evaluation model and the degree of sharing. In addition, we conducted validation for the statistical verification of the proposed security management evaluation model for small and medium sized healthcare institutions, and we performed the relative priority analysis through AHP analysis to derive the weight for each item. The result of this study is expected to be used as a standard of security management evaluation model that can be practiced in small and medium sized healthcare institutions.

• Journal of the Korea Society for Simulation
• /
• v.24 no.3
• /
• pp.97-105
• /
• 2015

This paper is to analyze the efficiency of power consumption in logistic systems that are based on self-driving roller conveyors by the simulation technology. The improvement of the efficiency brings advantages for reducing greenhouse gas emission and logistics costs. A self-driving roller conveyor is operated only when products are loaded on itself. Thus, the self-driving roller conveyor systems consume less electric power than continuous-driving roller conveyor systems. In this paper, we design a DEVS (Discrete-Event based System) based simulation model and construct self-driving roller and continuous-driving roller conveyor models. For the verification and validation of the designed simulation system and conveyor models, we model a corresponding logistic model for the experimental environment and compare between the model and a real system. The main objective of this paper is to describe the power consumption advantage of self-driving roller conveyor based logistic systems using a simulation method.

• Convergence Security Journal
• /
• v.18 no.3
• /
• pp.141-148
• /
• 2018

The purpose of this study is to analyze the safety needs and life satisfaction of users of security system. The contents of the questionnaire consisted of "safety need, use satisfaction, life satisfaction". As a result of the analysis, Chronbach's alpha coefficient was calculated as 0.897 for safety needs, 0.888 for use satisfaction, and 0.887 for life satisfaction. The items were found to have internal consistency. In the validation of discriminant validity, both AVE and CR values were found to be 0.6 or more than the reference value of 0.8. The intuitiveness of the variables used in this study was found to be largely secured. As the hypothesis test result, the standardization factor was calculated as 0.993 for 'safety needs ⇨ use satisfaction' and 0.453 for 'use satisfaction ⇨ life satisfaction', and both hypotheses were positive. As a result of the verification, it was analyzed that the higher the user's safety needs, the higher the use satisfaction, and the higher the use satisfaction, the higher the life satisfaction.

• The Journal of the Convergence on Culture Technology
• /
• v.9 no.5
• /
• pp.569-582
• /
• 2023

Lead-acid Battery is the oldest rechargeable battery system and has maintained its position in the rechargeable battery field. The battery causes thermal runaway for various reasons, which can lead to major accidents. Therefore, preventing thermal runaway is a key part of the battery management system. Recently, research is underway to categorize thermal runaway battery cells into machine learning. In this paper, we present a thermal runaway hazard cell detection and verification algorithm using DBSCAN and statistical method. An experiment was conducted to classify thermal runaway hazard cells using only the resistance values as measured by the Battery Management System (BMS). The results demonstrated the efficacy of the proposed algorithms in accurately classifying thermal runaway cells. Furthermore, the proposed algorithm was able to classify thermal runaway cells between thermal runaway hazard cells and cells containing noise. Additionally, the thermal runaway hazard cells were early detected through the optimization of DBSCAN parameters using a grid search approach.

• Journal of the Korea Society of Computer and Information
• /
• v.29 no.1
• /
• pp.121-130
• /
• 2024

In this paper, we propose an installation approach for Naval Combat Management System(CMS) software that identifies potential data anomalies during installation. With the popularization of wireless communication methods, such as Low Earth Orbit(LEO) satellite communications, various utilization methods using wireless networks are being discussed in CMS. One of these methods includes the use of wireless network communications for installation, which is expected to enhance the real-time performance of the CMS. However, wireless networks are relatively more vulnerable to security threats compared to wired networks, necessitating additional security measures. This paper presents a method where files are transmitted to multiple nodes using encryption, and after the installation of the files, a validity check is performed to determine if there has been any tampering or alteration during transmission, ensuring proper installation. The feasibility of applying the proposed method to Naval Combat Systems is demonstrated by evaluating transmission performance, security, and stability, and based on these evaluations, results sufficient for application to CMS have been derived.

• Korean Journal of Remote Sensing
• /
• v.36 no.6_1
• /
• pp.1323-1337
• /
• 2020

GEO-KOMPSAT-2A AMI (Advanced Meteorological Imager) radiometric calibration evaluation is an essential element not only for functional and performance verification of the payload but for the quality of the sensor data. AMI instrument consists of six reflective channels and ten thermal infrared ones. One of the key parameters representing radiometric properties of the sensor is a SNR (Signal-to-Noise Ratio) for the reflective channels and a NEdT (Noise Equivalent delta Temperature) for the IR ones respectively. Other important radiometric calibration parameters are a dynamic range and a gain value related with the responsivity of detectors. To verify major radiometric calibration performance of AMI, an offline radiometric evaluation tool was developed separately with a real-time AMI data processing system. Using the evaluation tool, validation activities were carried out during the GEO-KOMPSAT-2A In-Orbit Test period. The results from the evaluation tool were cross checked with those of the HARRIS, which is the AMI payload vendor. AMI radiometric evaluation activities were conducted through three phases for both sides (Side 1 and Side 2) of AMI payload. Results showed that performances of the key radiometric properties were outstanding with respect to the radiometric requirements of the payload. The effectiveness of the evaluation tool was verified as well.

• Journal of the Korean Society of Systems Engineering
• /
• v.13 no.1
• /
• pp.33-39
• /
• 2017

This paper describes the system engineering approach for the heat transfer analysis of plus7 fuel rod for APR1400 using, a commercial software, ANSYS. The fuel rod is composed of fuel pellets, fill gas, end caps, plenum spring and cladding. The heat is transferred from the pellet outward by conduction through the pellet, fill gas and cladding and further by convection from the cladding surface to the coolant in the flow channel. The goal of this paper is to demonstrate the temperature and heat flux change from the fuel centerline to the cladding surface when having maximum fuel centerline temperature at 100% power. This phenomenon is modelled using the ANSYS FEM code and analyzed for steady state temperature distribution across the fuel pellet and clad and the results were compared to the standard values given in APR1400 SSAR. Specifically the applicability of commercial software in the evaluation of nuclear fuel temperature distribution has been accounted. It is note that special codes have been used for fuel rod mechanical analysis which calculates interrelated effects of temperature, pressure, cladding elastic and plastic behavior, fission gas release, and fuel densification and swelling under the time-varying irradiation conditions. To satisfactorily meet this objective we apply system engineering methodologies to formulate the process and allow for verification and validation of the results acquired. The close proximity of the results obtained validated the accuracy of the FEM analysis of the 2D axisymmetric model and 3D model. This result demonstrated the validity of commercial software instead of proprietary in-house code that is more costly to develop and maintain.

• Nuclear Engineering and Technology
• /
• v.38 no.3
• /
• pp.259-276
• /
• 2006

As the use of digital systems becomes more prevalent, adequate techniques for software specification and analysis have become increasingly important in nuclear power plant (NPP) safety-critical systems. Additionally, the importance of software verification and validation (V&V) based on adequate specification has received greater emphasis in view of improving software quality. For thorough V&V of safety-critical systems, V&V should be performed throughout the software lifecycle. However, systematic V&V is difficult as it involves many manual-oriented tasks. Tool support is needed in order to more conveniently perform software V&V. In response, we developed four kinds of computer aided software engineering (CASE) tools to support system specification for a formal-based analysis according to the software lifecycle. In this work, we achieved optimized integration of each tool. The toolset, NuSEE, is an integrated environment for software specification and V&V for PLC based safety-critical systems. In accordance with the software lifecycle, NuSEE consists of NuSISRT for the concept phase, NuSRS for the requirements phase, NuSDS for the design phase and NuSCM for configuration management. It is believed that after further development our integrated environment will be a unique and promising software specification and analysis toolset that will support the entire software lifecycle for the development of PLC based NPP safety-critical systems.