• 대한전기학회:학술대회논문집
• /
• 대한전기학회 1999년도 하계학술대회 논문집 G
• /
• pp.2947-2949
• /
• 1999

The MX-13 digital multiplexer for leased line is one of the main facilities, so it is periodically monitored by the operator. Operators connect dummy terminal to the MX-13 digital multiplexer manually, and execute preventing inspection. When alarms occurred, they are manually checked by the operator. But, in order to get mere efficiency of accident prevention and monitoring facilities with rapid response to the accident symptom, and to get higher reliability from the companies who lease communication lines, we need to construct this system which is adequate to monitor IvlX-13 digital multiplexer in almost real time. We construct remote monitoring system for MX-13 digital multiplxer to meet those requirement. After constructing the system, it's possible that the local operator can manage local monitoring system to check the status of MX-13 digital multiplexers. Also, Center operator can monitor the facility which has problems, and located in the specific local areas with the use of Center monitoring system.

• Coupled systems mechanics
• /
• 제3권1호
• /
• pp.1-25
• /
• 2014

In this work, we present the theoretical formulation, operator split solution procedure and partitioned software development for the coupled thermomechanical systems. We consider the general case with nonlinear evolution for each sub-system (either mechanical or thermal) with dedicated time integration scheme for each sub-system. We provide the condition that guarantees the stability of such an operator split solution procedure for fully nonlinear evolution of coupled thermomechanical system. We show that the proposed solution procedure can accommodate different evolution time-scale for different sub-systems, and allow for different time steps for the corresponding integration scheme. We also show that such an approach is perfectly suitable for parallel computations. Several numerical simulations are presented in order to illustrate very satisfying performance of the proposed solution procedure and confirm the theoretical speed-up of parallel computations, which follow from the adequate choice of the time step for each sub-problem. This work confirms that one can make the most appropriate selection of the time step with respect to the characteristic time-scale, carry out the separate computations for each sub-system, and then enforce the coupling to preserve the stability of the operator split computations. The software development strategy of direct linking the (existing) codes for each sub-system via Component Template Library (CTL) is shown to be perfectly suitable for the proposed approach.

• Nuclear Engineering and Technology
• /
• 제54권7호
• /
• pp.2453-2466
• /
• 2022

Nuclear power plant operators in the main control room are exposed to stressful conditions in emergency situations as immediate and appropriate mitigations are required. While emergency operating procedures (EOPs) provide operators with the appropriate tasks and diagnostic guidelines, EOPs have static properties that make it difficult to reflect the dynamic changes of the plant. Due to this static nature, operator workloads increase because unrelated information must be screened out and numerous displays must be checked to obtain the plant status. Generally, excessive workloads should be reduced because they can lead to human errors that may adversely affect nuclear power plant safety. This paper presents a framework for an operator support system that can substitute the initial responses of the EOPs, or in other words the immediate actions and diagnostic procedures, in the early stages of an emergency. The system assists operators in emergency operations as follows: performing the monitoring tasks in parallel, identifying current risk and latent risk causality, diagnosing the accident, and displaying all information intuitively with a master logic diagram. The risk causalities are analyzed with a functional modeling methodology called multilevel flow modeling. This system is expected to reduce workloads and the time for performing initial emergency response procedures.

• Korean Journal of Mathematics
• /
• 제27권1호
• /
• pp.221-267
• /
• 2019

In the five first sections of this paper we define and study the hypergeometric transmutation operators $V^W_k$ and $^tV^W_k$ called also the trigonometric Dunkl intertwining operator and its dual corresponding to the Heckman-Opdam's theory on ${\mathbb{R}}^d$. By using these operators we define the hypergeometric translation operator ${\mathcal{T}}^W_x$, $x{\in}{\mathbb{R}}^d$, and its dual $^t{\mathcal{T}}^W_x$, $x{\in}{\mathbb{R}}^d$, we express them in terms of the hypergeometric Fourier transform ${\mathcal{H}}^W$, we give their properties and we deduce simple proofs of the Plancherel formula and the Plancherel theorem for the transform ${\mathcal{H}}^W$. We study also the hypergeometric convolution product on W-invariant $L^p_{\mathcal{A}k}$-spaces, and we obtain some interesting results. In the sixth section we consider a some root system of type $BC_d$ (see [17]) of whom the corresponding hypergeometric translation operator is a positive integral operator. By using this positivity we improve the results of the previous sections and we prove others more general results.

• 로봇학회논문지
• /
• 제13권3호
• /
• pp.151-156
• /
• 2018

Military robots are expected to play an important role in the future battlefield, and will be actively engaged in dangerous, repetitive and difficult tasks. During the robots perform the tasks a human operator controls the robots in a supervisory way. The operator recognizes battlefield situations from remote robots through an interface of the operator control center, and controls them. In the meantime, operator workload, controller interface, robot automation level, and task complexity affect robot operability. In order to assess the robot operability, we have developed ROSim (Robot Operational Simulator) incorporating these operational factors. In this paper, we introduce the results of applying ROSim experimentally to the assessment of reconnaissance robot operability in a battle field. This experimental assessment shows three resulting measurements: operational control workload, operational control capability, mission success rate, and discuss its applicability to the defense robot research and development. It is expected that ROSim can contribute to the design of an operator control center and the design analysis of a human-robot team in the defense robot research and development.

• 전자공학회논문지SC
• /
• 제44권3호
• /
• pp.51-57
• /
• 2007

표적추적장치의 수동제어기는 인간 운용자의 동특성에 따라 제어명령을 생성하고 원하지 않는 잡음과 외란의 영향으로 시스템의 성능과 안정성을 보장하지 못하게 하는 요인이 되고 있다. 특히, 야지를 기동시 운용자의 운용환경에 따라 운용자 특성이 변동될 경우 시스템의 성능저하와 불안정성은 더욱 증가 된다. 즉, 인간이 제어루프에 포함된 수동제어기는 설계단계에서 시간지연과 같은 운용자의 특성을 고려하여야 하며, 운용자에 의해 생성되는 제어명령이 실제 운용환경에서 외란과 동특성의 변화에 적합하도록 하여야 한다. 본 논문에서는 전시기를 통해 표적을 수동핸들로 추적하는 표적추적장치의 수동제어기를 인간운용자를 포함시켜 구성하고자, 추적명령을 생성하는 운용자 모델링을 수행하였다. 특히, 주행하는 차량에 탑재된 표적추적장치는 외란과 추적위치에 잡음이 많이 존재하기 때문에 운용자 모델링이 쉽지 않은 것으로 알려져 있다. 따라서, 수동표적추적장치의 실제 운용환경에서 수집된 데이터를 이용하여 운용자 및 수동제어기의 모델링을 수행하고, 시뮬레이션을 통하여 적용된 운용자 모델의 타당성과 실효성을 보였다.

• 한국원자력학회:학술대회논문집
• /
• 한국원자력학회 1995년도 추계학술발표회논문집(1)
• /
• pp.185-190
• /
• 1995

Conventional alarm system has many difficulties in the operator's identifying the plant status during special situations such as design basis accidents. To solve the shortcomings, an on-line alarm annunciator system, called dynamic alarm console (DAC), was developed. In the DAC, a signal is generated as alarm by the use of an adaptive setpoint check strategy based on operating mode, and time delay technique is used not to generate nuisance alarms. After alarm generation, if activated alarm is a level precursor alarm or a consequencial alarm, it would be suppressed, and the residual alarms go through dynamic prioritization which provide the alarms with pertinent priorities to the current operating mode. Dynamic prioritization is achieved by going through the system- and mode-oriented prioritization. The DAC has the alarm hierarchical structure based on the physical and functional importance of alarms. Therefore the operator can perceive alarm impacts on the safety or performance of the plant with the alarm propagation from equipment level to plant functional level. In order to provide the operator with the most possible cause of the event and quick cognition of the plant status even without recognizing the individual alarms, reactor trip status tree (RTST) was developed. The DAC and the RTST have been simulated with on-line data obtained from the full-scope simulator for several abnormal cases. The results indicated that the system can provide the operator with useful and compact information fur the earlier termination and mitigation of an abnormal state.

• 한국시스템다이내믹스연구
• /
• 제16권1호
• /
• pp.53-74
• /
• 2015

The purpose of this paper is to simulate public trust on nuclear regulation policy. The first of all, public trust variables and the model were developed and analysed by system dynamic method. The model are consisted of the operator safety culture level, regulatory competence levels, the public satisfaction and public trust level. The scenario is made up three type which base scenario, the system operator's safety culture level and accident event level. First. the simulation results of standard scenario shows that rapidly declining public satisfaction and trust level of the national safety after Japan's nuclear accident in November 2011. Second, operator safety culture level and simulated divided into three levels. The results showed that a greater impact on the public satisfaction if bad than good case. Finally, the size of the accident was simulated divided into three levels levels(no accident, medium, serious accidents). the results showed a weak effect against the regulatory capacity and safety performance levels but showed a significant impact on public satisfaction and confidence level.

• 한국군사과학기술학회지
• /
• 제10권2호
• /
• pp.21-30
• /
• 2007

A practical method to design the input shaping which generates control command is proposed in this paper, We suggest an experimental technique considering human operator's target tracking error to improve aiming accuracy which significantly affects hit probability. It is known that stabilization performance is one of the most important factors for ground combat vehicle system. In particular, stabilization error of the manual target tracking system mounted on moving vehicle directly affects hit probability. To reduce this error, we applied input command shaping method using preprocessing filtering and functional curve fitting. First of all, we construct the human operator model to consider effects of human operator on our system. Input shaping curve is divided into several regions to get rid of the above problems and to improve the system performance. At example design part, we chose three steps of functional command curve and determine the parameters of the function by the proposed design method. In order to verify the proposed design method, we carried out the experiments with real plant of a fighting vehicle.

• 동력기계공학회지
• /
• 제21권4호
• /
• pp.42-50
• /
• 2017

A velocity controller using a modified model reference adaptive controller (M-MRAC) and a projection operator for a fish sorting belt conveyor system with uncertainty parameters, input saturation and bounded disturbances is proposed in this paper. To improve the tracking performance and robustness of the proposed controller in the presence of bounded disturbances, the followings are done. Firstly, the reference model for the conventional model reference adaptive controller (CMRAC) is replaced by a modified reference model for a M-MRAC to reduce unexpected high frequency oscillation in control input signal when the adaptation rate is increased. Secondly, estimated parameters in an adaptive law are varied smoothly under bounded external disturbances and a projection operator is utilized in an adaptive law for the proposed M-MRAC controller to be robust. Thirdly, an auxiliary error vector is introduced for compensating the error dynamics of the system when the saturation input occurs. Finally, the experimental results are shown to verify the better effectiveness and performance of the proposed controller under the bounded disturbance and saturated input than that of a CMRAC.