• Journal of Digital Convergence
• /
• v.5 no.1
• /
• pp.91-100
• /
• 2007

The purpose of this study is to confirm whether user attitude and expectation make a significant difference on the system performance according to management level of IS. The management level is defined as a evaluation of IS and project management. Field research was employed to empirically investigate the relationship among the variables. The finding of the study can be summarized as follows. The positive attitude has a favorable effect on the system performance. But high expectation shows low performance under the strict evaluation.

• The Journal of Fisheries Business Administration
• /
• v.33 no.2
• /
• pp.31-48
• /
• 2002

This paper is aimed to analyze how to evaluate the choice of optimal management measures and level of control in fisheries management under the costly and imperfect management system by comparing with costless and perfect management system that is commonly assumed in the analysis of fisheries regulations. Fishermen would set the level of fishing efforts at the point where the marginal fishing profit for fishing effort is equal to the marginal level of fine under costly and imperfect management system. Therefore, under the case where the marginal fishing profit is higher than the marginal level of fine, the level of fishing efforts would be made at the point which is higher than the level of fishing efforts made under costless and perfect management system and is not a point where the economic profit is maximized in regulated fisheries. From this conclusion, the fishermens avoidance activities against regulations as well as the level of control in fisheries management substantially have an influence on the choice of fisheries management instruments. According to the analysis of optimal fisheries management policy, the economic profits in regulated fisheries are determined by the level of fisheries enforcement costs and total fishing profits, in which as enforcement costs increase the economic profits decrease. In addition, the economic profits vary in response to the level of control in avoidance activities. That is, as avoidance costs decrease, the economic profits increase. The determination of optimal level of control in fisheries management should be made at the point where the marginal regulation costs are equal to the marginal profits from regulated fisheries, in which marginal regulation costs are different according to the type of management measures. And the level of profits changes in response to different levels of avoidance activities. The management measure that can maximize the difference between the marginal regulation costs and marginal profits from regulated fisheries should be chosen as an optimal fisheries management instrument.

• Journal of the Korea Institute of Military Science and Technology
• /
• v.19 no.1
• /
• pp.35-42
• /
• 2016

Modern aircraft is facing the increase of power demands and thermal challenges. In accordance with the application of more electric technology and advanced mission requirement, aircraft system requires increase of power generation and it cause increase of internal heat generation. Simultaneously, restrictions have significantly been imposed to the thermal management system. Modern aircraft must maintain low radar observability and infra-red signature. In addition, new composite aircraft skins have reduced the amount of heat that can be rejected to the environment. The combination of these characteristics has increased the challenges faced by thermal management. In order to mitigate the thermal challenges, the concept of system level thermal management should be applied and new modeling and simulation tools need to be developed. To develop and utilize system level thermal management technology, three key points are considered. Firstly, the performance changes of subsystems and components must be assessed at an integrated thermal system. It is because that each subsystem and component interacts with other subsystems or components and it can directly effects on overall system performance. Secondly, system level thermal management requirements and solutions must be evaluated early in conceptual design process as vehicle and propulsion system configuration decisions are being made. Finally, new component level thermal management technologies must focus on reducing heat generation and increasing the availability of heat sinks.

• Journal of Korean Society for Quality Management
• /
• v.32 no.2
• /
• pp.168-190
• /
• 2004

In these days of world-wide business environment, the characteristics of quality management are variety, specialty, decentralization, totality, etc. Thus nowadays quality management is demanded to incorporate these new concepts. We propose a web-bused distributed expert system for this purpose. The system consists of four expert systems for design of experiment, acceptance inspection, statistical process control and reliability management corresponding to design quality, incoming-material quality, manufacturing quality and usability quality, respectively, throughout the total product life cycle. Each distributed expert system at the horizontal level in the hierarchy carries out its own quality jobs independently. At the lower level in the hierarchy there is an expert system for measurement analysis to provide reliable data, and at the upper level, an expert system for total quality management to coordinate, integrate and make final decisions. A prototype has been developed and its application is presented.

• Journal of Korea Society of Digital Industry and Information Management
• /
• v.18 no.2
• /
• pp.61-75
• /
• 2022

The purpose of this study is to analyze the impact of quality management system requirements, a management innovation technique, on business performance to secure the competitiveness of SMEs in an environment of increasing uncertainty in the global economy and intensifying competition. To this end, a survey was conducted on small and medium-sized enterprises (SMEs) operating a quality management system, and statistical analysis was performed through validity and reliability analysis, regression analysis, and group analysis using IBM SPSS 26.0. As a result of the study, it was found that planning, operation, support, and improvement, which are the core requirements of a quality management system, have a positive effect on business performance. In addition, through group analysis, it was found that the effect of quality management system requirements on business performance varies according to the level of the company. This means that the importance of quality management requirements required for strategy establishment varies according to the quality management introduction level of small and medium-sized manufacturers, and it can be used for small and medium-sized manufacturers to set strategic directions.

• International conference on construction engineering and project management
• /
• 2009.05a
• /
• pp.1053-1059
• /
• 2009

Construction system modeling can enhance work performance by following the behaviors of a system. System behaviors may originate from physical aspects of a system, namely operation level variables, or from non-physical aspects of a system known as context level variables. However, construction system modelers usually focus on only one type of system variable (i.e., operation level or context level) which can lead to less accurate results. Hybrid modeling with System Dynamics (SD) and Discrete Event Simulation (DES) is one of the approaches that has been utilized to address this issue. In this research, an SD-DES hybrid model of a steel fabrication shop is developed, and the benefits of capturing context level variables together with operation level variables in the model are discussed.

• Journal of Korean Society of Industrial and Systems Engineering
• /
• v.40 no.3
• /
• pp.18-26
• /
• 2017

Defense industries which require high reliability need an optimized quality management system with well-planned implementation. And the government should examine the overall status of defense industries, then establish practical policies with a proper support plan in required areas to upgrade the quality management level of manufacturers. Thus, DTaQ developed the model for 2 years from 2014, which specialized in quality management level analysis for defense industries. And a survey has been undertaken with that model by DTaQ and Korea Research Center in 2016. The surveyed companies randomly sampled among those which have more than 30 employees and delivery history over past 3 years, and finally 106 defense industries were selected. This paper present survey method and indexes for survey of defense industry quality management level. The survey was conducted in the order of planning, data collection and data processing, and the validity and reliability of the data were verified to increase objectivity of survey results. The survey contents mainly consist of system quality and management quality. System quality includes Product Development Management, Production Operation Management, supply chain quality management, Safety & Environment Management and Reliability Management, on the other hand, management quality includes Strategic Leadership, Human Resource Management, Customer Market Management and Information & Knowledge Management. Thus this proposes the current overall quality management status of the 106 defense industries and shows level differences by company sizes and manufacturing sectors based on the result of survey. Specifically, this paper enables to track the areas which need prompt government support with the policy directions to make quality management level higher. Therefore, it is expected that this can be used as reference data in establishing quality policies for military supplies in the future.

• Journal of Korean Society for Quality Management
• /
• v.52 no.2
• /
• pp.357-376
• /
• 2024

Purpose: The purpose of this study is to design an objective and comparable diagnostic system for diagnosing the technology level of military maintenance depots and verify its actual applicability. Methods: Literature Review, Capability Maturity Model Integration, Analytic Hierarchy Process. Results: Military maintenance depot maintenance quality level diagnosis items, Maintenance quality level by maintenance technology area, Guidelines for diagnosing maintenance quality level, Quality level comparison results by area and implications for improvement. Conclusion: In order to systematically evaluate the maintenance quality of military maintenance depots, this study was conducted with the goal of designing an overall maintenance quality diagnosis system, including diagnosis areas, diagnosis items, and a diagnosis score award system, by improving the existing evaluation method. In addition, the newly developed maintenance quality diagnosis system was applied to actual evaluation activities and the results were returned to members, confirming the usefulness of the developed maintenance quality diagnosis system in the field.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.11 no.12
• /
• pp.2280-2286
• /
• 2007

Information system contains various components, and these components can be categorized into some types. When preparing security level management activity, it is most important to define the target of management activity. And after deciding these targets, security level management activity can be started. This paper defines management targets by dividing information system into some parts, and shows these targets can be managed variously according to operation environments and characteristics.

• Journal of the Korea Safety Management & Science
• /
• v.6 no.2
• /
• pp.103-114
• /
• 2004

IEC 60300 series, the international standards on reliability management system are newly developed and introduced rapidly worldwide. In order to meet this fast-changing situation, it is necessary to apply them to the Korean industries effectively. It includes the establishment of the infrastructure such as documentation of Korean Standards, introduction of test equipments and test manuals, accreditation of the certification bodies and training of the specialists etc. IEC 60300 is upgraded management system of the ISO 9000 and ISO 14000. In this regard, the Korean companies which were certified with the ISO 9000 or 14000 should endeavor to find new strategies and methods to be certified with IEC 60300. This paper introduces a Quantitative method of estimating the level of the reliability management system by applying the MIR(Maturity Index on Reliability) technique. This enables the estimation of the operation level of the system and can upgrade the maturity level of it.