• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.2 no.1
• /
• pp.1-17
• /
• 1982

The stream morphological characteristics of a river basin has a close correlation with the hydrological and hydraulic characteristics of the basin. In this study the correlations of flow duration and Hydraulic geometry with the stream morphological characteristics as well as the correlation between flow duration and hydraulic geometry were analyzed bases on the data for the Geum River basin. The purpose of this study was to provide the necessary informations for water utilization projects at ungauged locations along the river course. First of all, the stream morphological characteristics was analyzed based on the Horton's three laws on the morphology of a stream that is, the law of stream number, the law of average stream length and the law of average stream slope. As is the case for majority of the rivers it was found that the Geum River basin was well developed according to the Horton's laws. High correlations were also found between the basin characteristics and the channel characteristics. The flow duration curves obtained with the daily stream flow data of 10~90% frequency of occurences at the five stage gauging stations in the Geum River could, in general, be expressed as an exponential functional relationship. The concept of proportional stream ordering system was employed to describe continuously the longitudinal variation of the stream morphological characteristics, and the mathematical model was formulated for the discharge-frequency-proportional stream order relationship. With the morphological characteristics as a common parameter the relationships with flow duration, drainage area were established in mathematical expressions, respectively.

• Progress in Medical Physics
• /
• v.24 no.2
• /
• pp.119-126
• /
• 2013

Due to the introduction of CR and DR, it has been neglected the use of the X-ray beam collimator and field size. This study examines nationwide survey of the proper use of collimator and field size by area in a specific field of plain radiography and the current status. Authors emphasized the need for the field size criteria, and propose a standard reference field size in each specific radiologic examination. Total 333 medical institutions (included in Seoul, Gyeonggi-do, Jeolla, Chungcheong, Gangwon-do, Busan area), were investigated in relation to the status of the X-ray beam collimation field size, type specific inspection areas, medical facilities, and image analyses by type to figure out whether they use the adjustment of image field to the specific examination. To assess the awareness and the impact of radiation exposure to the collimation adjustable, 168 radiographers who was working in 10 general hospitals, 10 hospitals, and 10 clinics, were surveyed how they haver adjusted the actual field size. We examine that 61.3% of medical institutions used the "Proper collimation" and only 49.9% of them employed proper one in lumbar spine densely crowded by major organs. 69% among general hospitals, and 65% among hospitals using DR system were using proper collimation. Radiographers recognized that proper adjustment of collimation could reduce the harmful radiation dose on patients. In the survey, 97.6% of respondents were aware of this fact, but only 83.3% of respondents did the adjustment of the size of the collimation field. The using of proper collimation field was low in the nationwide survey, so the effort to reduce the radiation dose on the patients is urgently needed. A unified standard for the field accompanied by thorough education should be needed.

• Journal of Bio-Environment Control
• /
• v.24 no.4
• /
• pp.308-316
• /
• 2015

This study was conducted to investigate the situation of ICT apply to plastic greenhouse, and the results be apply to design of new one. A CFD analysis were conducted to monitering the ventilation and energy saving of the single span greenhouse newly designed. The causes of delay to apply ICT to plastic greenhouse are the high cost for installation(24%), insufficiency of after services(19%), often disorder(16%), unskillful management of soft ware(15%), insufficient ICT efficiency(13%) and unsatisfying of income increase(12%). The parts of problem occurred in ICT plastic greenhouse are the structure, actuator, environmental control system and sensor(approximate 14%, respectively), remote control technique(13%), plant management technique(12%), energy saving technique(10%) and utilization of software(8%). In the condition of lateral window closed, the average wind speed changed to slow, but it was faster in the condition of leeward side window opened than in the condition of lee and winward side window opened. The air movement in the condition of lateral window closed occur by air moving fan not by out air. It is not affect the room temperature but effective the uniformity of room temperature. The average temperature of low height greenhouse was uniform than high height one. The average temperature in condition of 3rd curtain opened become same with outside temperature after 2 hours, but take more 5 hours in condition of 3rd curtain closed.

• The Korean Journal of Nuclear Medicine Technology
• /
• v.17 no.1
• /
• pp.30-35
• /
• 2013

Purpose: One of the current services, providing information to the patients and their guardians by using promotion materials induces positive responses and contributes to the improvement of the hospital reliability. Therefore, the objective of this study is to evaluate the effectiveness of audio visual materials, one of the means of promotion, as a way to give accurate medical information to resolve patient's curiosity about purpose and procedure of their examination and deplete complains about waiting which attributes negative effect to service quality assessment. Materials and Methods: 60 patients(mean age $53.97{\pm}12.24$, male : female = 26 : 34) who had $^{18}F-FDG PET/CT$ scan from July 2012 to August 2012 in Seoul Asan Medical Center were referred to the study. All of the patients having PET/CT scan were asked to watch an informative video material before the injection of radiopharmaceutical ($^{18}F-FDG$) and to fill in a questionnaire. Results: As a result of analyzing the contents of questionnaire, 52% of 60 patients had PET/CT scan for the first time and 72.4% of the patients read the PET/CT guidebook offered from their outpatient department or inpatient wards before their scan. After we searched the level of previous knowledge of the purpose and method of PET/CT scan, the patients answered 25.1% "know well", 34% "not sure", 40.9% "don't know" respectively. And 84.7% of the patients answered that watching the PET/CT guide video before the injection helps understanding what exam they were having and 15.3% of the patients did not. For the question asking ever the patients have experienced using our homepage or smart phone QR code to see the guide video before they visit out PET center, only 3.3% of them answered "yes". Lastly, the patients answered 60.1% "yes", 31.4% "so so" and 8.5% "no" respectively for the question asking whether watching the video makes the patients to fill the waiting time short. Conclusion: It is found that understanding of objective and method of the PET/CT scan and level of satisfaction was improved after the patients watched the guide video whether they had PET/CT scan before and read the PET/CT guidebook or not. Also, watching the video was effective for the reduction of perceptible waiting time. But while displaying the PET/CT guide video is useful for providing information about the scan and shortening the waiting time as one of the medical service, utilization of service was actually very poor because of the passive promotion and indifference of the patients about their examination. Therefore, from now on, it is necessary to construct the healthcare system which can be offered to more patients through the active promotion.

• Journal of agricultural medicine and community health
• /
• v.15 no.2
• /
• pp.97-106
• /
• 1990

1. Background Women's health and their involvement in health care are essential to health for everyone. If they are ignorant, malnourished or over-worked, the health &-their families as well as their own health will suffer. Women's health depends on broad considerations beyond medicine. Among other things, it depends upon their work in farming. their subordination to their families, their accepted roles, and poor hygiene with poorly equipped housing and environmental sanitation. 2. Objectives and Contents a. The health status of rural women : physical and mental complaints, experience of pesticides intoxication, Farmer's syndrome, experiences of reproductive health problems. b. participation in and attitudes towards housework and farming c. accessibility of medical care d. status of maternal health : fertility, family planning practice. induced abortion, and maternal care 3. Research method A nationwide field survey, based on stratified random sampling, was conducted during July, 1986. Revised Cornell Medical index(68 out of 195 items). Kawagai's Farmers Syndrome Scale, and self-developed structured questionnaires were used to rural farming wives(n=2.028). aged between 26-55. 4. Characteristics of the respondents mean age : 40.2 marital status : 90.8% married mean no. of household : 4.9 average years of education : 4.7 yrs. average income of household : \235,000 average years of residence in rural area : 36.4 yrs average Working hours(household and farming) : 11 hrs. 23 min 5. Health Status of rural women a. The average number of physical and mental symptoms were 12.4, 4.7, and the rate of complaints were 22.1%, 38.8% each. revealing complaints of mental symptomes higher than physical ones. b. 65.4% of rural women complained of more than 4 symptoms out of 9, indicating farmer's syndrome. 11.9 % experienced pesticide overdue syndrome c. 57.6% of respondents experienced women-specific health problems. d. Age and education of respondents were the variables which affect on the level of their health 6. Utilization of medical services a. The number of symptoms and complaints of respondents were dependent on the distance to where the health-care service is given b. Drug store was the most commonly utilized due to low price and the distance to reach. while nurse practitioners were well utilized when there were nurse practitioner's office in their villages. c. Rural women were internalized their subordination to husbands and children, revealing they are positive(93%) in health-care demand for-them but negative(30%) for themselves d. 33.0% of respondents were habitual drug users, 4.5% were smokers and 32.3% were alcohol drinkers. and 86.3% experienced induced-abortion. But most of them(77.6%) knew that those had negative effects on health. 7. Maternal Health Care a. Practice rate of contraception was 48.1% : female users were 90.9% in permanent and 89.6% in temporary contraception b. Induced abortions were taken mostly at hospital(86.3%), while health centers(4.7%), midwiferies(4.3%). and others(4.5%) including drug stores were listed a few. The repeated numbers of induced abortion seemed affected on the increasing numbers of symptoms and complaints. c. The first pre-natal check-up during first trimester was 41.8%, safe delivery rate was 15.6%, post-natal check-up during two months after delivery. Rural women had no enough rest after delivery revealing average days of rest from home work and farming 8.3 and 17.2. d. 86.6% practised breast feeding, showing younger and more educated mothers depending on artificial milk 8. Recommendations a. To lessen the multiple role over burden housing and sanitary conditions should be improved, and are needed farming machiner es for women and training on the use of them b. Health education should begin at primary school including health behavior and living environment. c. Women should be encouraged to become policy-makers as well as administrators in the field of women specific health affairs. d. Women's health indicators should be developed and women's health surveillance system too.

• Korean Journal of Agricultural Science
• /
• v.9 no.1
• /
• pp.357-370
• /
• 1982

Recent concern regarding price and availability of fossil fuels has spurred the interest in alternative sources for farm crop drying. Among the available options such as biomass energy, wind power, nuclear energy and solar energy etc., the increasing attention is being directed to the utilization of heat from solar energy especially for farm crop drying. Even though solar energy is dispersed over a large land area and only a relatively small amount of energy can be simply collected, the advantages of solar energy is that the energy is free, non-polluting. The study reported here was designed to help supply the informations for the development of simple and relatively inexpensive solar warehouse for farm crop drying and storage. Specifically, the objectives of this study were to determine the performance of the solar collector fabricated, to compare solar supplemented heat drying with natural air drying and to develop a simulation model of temperature in stored grain, which can be used to study the effects due to changes in ambient air temperature. For those above objectives, solar collector was fabricated from available materials. Corrugated steel galvanized sheet, painted flat black, was used as absorbers and clear 0.2mm polyethylene sheet was the cover material. The warehouse for rough rice drying and storage was constructed with concrete block, and the solar collector was used as the roof of warehouse instead of original roofing system of it. The results obtained in this study were as follows: 1. The thermal efficiency of the solar collector was average 26 percent and the overall heat transfer coefficient of the collector was approximately $25kJ/hr.m^2\;^{\circ}K$. 2. Solar heated air was sufficient to dry one cubic meter of rough rice from 23.5 to 15.0 percent in 7 days and natural air was able to dry the same amount of rough rice from 20.0 to 5 percent in l2 days. 3. Drying with solar heat reduced the required drying time to dry the same amount of rough rice into a half compared to natural air drying, but overdrying problems of the bottom layer were so severe that these problems should be thoroughly analyzed. 4. Simulation model of temperature in stored grain was developed and the results of predicted temperature agreed well with test results. 5. Based on those simulated temperature, changes in the grain-temperature were a large at the points of the wallside and the damage of the grain would be severe at the contact area of wall.

• Journal of Animal Environmental Science
• /
• v.15 no.3
• /
• pp.251-262
• /
• 2009

In this research dairy cattle barn facilities what are 4,198 houses hold over 50 heads were surveyed by scale and province. Full-time farms hold over 50 heads breed total 344,514 heads. Each of Farms holds 50 to 99 heads were 79.8 percent and breed average 82.1 heads. Dairy cattle barns were constructed september 1995 averagely. Each of barns have $1,740.0\;m^2$ scale. The construction type of dairy cattle barn was almost litter barn type 84.0%, freestyle type 5.1%, mooring+litter ground type 17.3% and other types 4.4%. The litter barn type was popular in small farms. But in large farms, freestyle type was popular than small farms. The construction type of dairy cattle barn was almost litter barn type 84.0%, freestyle type 5.1%, moohng+ltter ground type 17.3% and other types 4.4%. Type of dairy cattle robotic milking system was pipeline 41.5%, herringbone 22.8% and tandem 35.8%. The pipeline type was popular in small farms which have 50~99 heads. But in large farms which have over 200 heads, tandem type was popular than small farms. Proportion of floor type of dairy cattle barn was almost litter type 94.9%. Scraper type was popular in large farms than in small farms. Proportion of roof type of dairy cattle barn was slate 32.5%, vinyl 16.3%, sunlight 11.1%, panel 10.9, zinc plate 8.8 and steel plate 8.3%. Roof type was lots of slate type before 1995. But vinyl type is increasing after 1995. Proportion of wall type of dairy cattle barn was almost open type 83.3% and winch-curtain 26.8%. Utilization period of dairy cattle barn was 9.2 years about milker, 7.9 years about automatic feeder, 9.2 years about waterer and 10.4 years about electric facilities. In this results, there were lots of improvements about automatic feeder.

• Journal of the Economic Geographical Society of Korea
• /
• v.22 no.4
• /
• pp.438-457
• /
• 2019

The main purpose of this paper is to identify the entry types and locational determinants of North Korean workers in cross-border regions between North Korea and China. More specifically, the paper has attempted to divide the entry type of them in the regions into two; 1) entry via transactions between Chinese traders with North Korea and North Korea trade companies, and 2) entry via transactions between Korean-Chinese middlemen and North Korean trade companies. Also, it has analyzed main factors of their locational determinants in the spatial contexts of the regions. There have been changes in two perspectives in terms of the entry paths and types of them in accordance with the transformation of characteristics of United Nations sanction against North Korea from 'call-upon' to 'decide' after UN Security Council Resolution 2094 in 2013. Firstly, main agents who have dealing with North Korean trade companies which have right to dispatch North Korean workers have been changed from Chinese traders into Korean-Chinese brokers who are specialized in the introduction of North Korean workers with one-stop service from visa administrative to labor managements. Secondly, there has been a transfer of North Korean workers in the regions from formal to informal workers who has been admitted into China with a short stay or a tourist visa, and then remained illegally to be employed in China. Therefore, as demands on service which is able to guarantee the security of North Korean informal workers and their managements have increased, Korean-Chinese brokers have been stimulated in the regions after the operation of real international sanctions against overseas North Korean workers. In addition, the main factors of their locational determinants in cross-border regions between North Korea and China are could be analyzed in three perspectives; 1) an increase in real wages in accordance with the reform of the Chinese social insurance system after 2011, 2) the structural vulnerability of labor markets in the regions, 3) the utilization of stable and manageable workers.

• Journal of Global Scholars of Marketing Science
• /
• v.18 no.2
• /
• pp.113-145
• /
• 2008

Marketing for the distribution industry is making an ongoing progress in the changes of customers, the competitive environment, and the internal marketing environment. Integrated marketing communication activities are required for the enhancement of efficiency in the market.oriented activities. In this study, IMC is defined as "a notion that a market oriented business integrated marketing communication means, conducting and evaluating marketing activities with consistent messages in order to communicate with customers based on databases." In this study, an IMC planning model for the improvement of marketing efficiency in the distribution industry was derived from a pilot study. This model may be broken down into the following phases: IMC goals setting, situational analysis (customer analysis, competition analysis and company analysis), customer data analysis, contact management, budgeting, the establishment of an IMC strategy, the IMC mix and execution, an evaluation system, and feedback. In consideration of the characteristics of the distribution industry, this study was accompanied by a vocational study on IMC means employed by, in particular, department stores and other distributors such as: advertising, sales promotion, sales promotion advertising, direct marketing, public relations, personal selling, the Internet, mobile, visual merchandising, words of mouth. In addition, this study also covered the correlation among variables such as IMC activities of distributors, the process of forming customer's brand attitudes, brand loyalty and repurchase intention. This research would enhance the utilization of IMC. The analysis on customer's brand attitudes toward the IMC activities of distributors requires the simultaneous consideration of how they are linked to purchase as well as their attitudes toward both distributors and stores. The formation of brand loyalty and repurchase intention is related to the integration of marketing communication and the maintenance of consistency in contents, which requires integrated brand communication (IBC) strategies. IBC is a concept of using IMC means to manage the brand in a continuing and consistent manner and measuring their effect, which is a process to establish enterprise.level brand identity and maximize brand loyalty and repurchase intention by integrating IMC means. For an empirical analysis in this study, an online questionnaire survey was conducted among those department store customers from 20's to 50's who reside either in the Seoul and Gyeonggi areas and have made purchase at department stores. In this study, the research model consisted of four theoretical variables: IMC activities, IMC attitudes, brand loyalty, and repurchase intention, on which variables a pilot study was conducted. A number of hypotheses were constructed on the relations between IMC activities and IMC attitudes, between IMC attitudes and repurchase intention, and between brand loyalty and repurchase intention. The test of the hypotheses may be summarized as follows: Firstly, the test of the hypothesis concerning the relation between IMC attitudes and IMC activities - advertising, sales promotion, direct marketing, public relations, personal selling, the Web, mobile, visual merchandising, and word of mouth - indicates that advertising, sales promotion, direct marketing, public relations, personal selling, mobile, visual merchandising, and word of mouth have significant impact on IMC activities. In addition to the result similar to those of previous studies that such marketing communication means as word of mouth, advertising, personal selling and sales promotion, in particular, play very important roles, a notable finding of this study is that visual merchandising performed by department stores is shown to have very significant impact on IMC activities. On a separate note, it is also noteworthy that Internet marketing activities engaged by department stores are not shown to have significant impact on IMC attitudes. Secondly, the test of the hypothesis on the relation between IMC attitudes and brand loyalty attests that IMC attitudes for the distribution industry significantly affect brand loyalty. Thirdly, the test of the hypothesis concerning the relation between IMC attitudes and repurchase intention confirms that IMC attitudes for the distribution industry significantly affect repurchase intention. Fourthly, the test of the hypothesis concerning the relation between brand loyalty and repurchase intention indicates that brand loyalty significantly affect repurchase intention. A comprehensive view of these findings points to the conclusion that the IMC activities for the distribution industry do affect IMC attitudes, brand loyalty, and repurchase intention.

• Progress in Medical Physics
• /
• v.16 no.1
• /
• pp.10-15
• /
• 2005

IAEA's guidance levels have been provided for western people to the end. Guidance levels lower than the IAEA'S will be necessary in view of Korean people's proportions. Therefore, we need to develope the standard doses for Korean people. And we conducted a nationwide survey of patient dose from x-ray examinations in Korea. In this study, the 278 institutions were selected from Members Book of Korean Hospital Association. The valid response rate was approximately 57.9%. Doses were calculated from the questionnaires by NDD method. We obtained the results were as follows; 1) General radiographic equipments were distributed for 42.0%, fluoroscopic equipments 29.4%, dental equipments 13.2%, CT units 8.1 % and mamographic units 7.2%. 2) According to classification by rectification, three-phase equipments were 29.9%, inverter-type generators 29.5%, single-phase equipments 25.5%, constant voltage units 9.0% and unknown units 6.0%. 3) According to classification by receptor system, film-screen types were 46.8%, CR types 26.8%, DR types 17.7% and unknown types 8.9%. 4) The number of examinations were chest 49.2%, spine 16.8% and abdomen 12.7%. 5) Patient doses were head AP 3.44 mGy, abdomen AP 4.25 mGy and chest PA 0.39 mGy.