• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.41 no.12
• /
• pp.994-1001
• /
• 2013

Process of helicopter development is divided in design, manufacture and test & evaluation phase. Test & evaluation is performed step by step in order of component test, rig test, system ground test and flight test. After completing ground test and before first flight, US military specification requires 50hrs-PFAT in order to assure flight safety. PFAT is the test which requires tie-down and severe load imposition and it needs special ground test vehicle which is similar to helicopter prototype as well as much cost and period. In case of KUH, we have performed tailored PFAT considering KUH development environment. In this paper, we propose a proper way to perform the PFAT in accordance with development environment by giving KHU PFAT procedure and result.

• Journal of Digital Contents Society
• /
• v.18 no.8
• /
• pp.1661-1669
• /
• 2017

In 2017, Korea has reached 1.3 million elderly people living alone. The government is promoting the basic care service for the elderly by using care workers to check the security of the elderly living alone. However, due to lack of service personnel and service usage rate of elderly care workers, it is difficult to manage. To improve these environmental constraints, this study attempted to construct a monitoring system for elderly people living alone by using sensors such as temperature, humidity, motion detection, and gas leak detection. The sensor periodically collects the current status data of the elderly and sends them to the server, creates a real time graph based on the data, and monitors it through the web. In the monitoring process, when the sensor is out of the range of the specified value, it sends a warning text message to the guardian to inform the current situation, and is designed and implemented so as to support the safety life of the elderly living alone.

• Korean Journal of Air-Conditioning and Refrigeration Engineering
• /
• v.25 no.1
• /
• pp.7-13
• /
• 2013

Bio Clean Room(BCR) and pharmaceutical product manufacturing facilities require careful assessment of many factors, including HVAC, controls, room finishes, process equipment, room operations, and utilities. Flow of equipment, personnel, and product must also be considered along with system flexibility, redundancy, and maintenance shutdown strategies. It is important to involve designers, operators, commissioning staff, quality control, maintenance, constructors, validation personnel, and the production representative during the conceptual stage of design. Critical variables for room environment and types of controls vary greatly with the clean space's intended purpose. It is particularly important to determine critical parameters with quality assurance to set limits and safety factors for temperature, humidity, room pressure, and other control requirements. In this paper, oxygen cluster ion equipment was utilized in order to enhance the indoor air quality and to prevent the airborne infection of ward in hospital. Moreover, the performance test of the equipment was also performed in order to develop the optimal sterilization system of BCR using the equipment.

• Journal of the Korea Society of Computer and Information
• /
• v.12 no.1 s.45
• /
• pp.107-116
• /
• 2007

Is need Remote Access through internet for business of Ubiquitous Computing age, and apply OTP for confidentiality about inputed ID and Password, network security of integrity. Current OTP must be possessing hardware of Token, and there is limitation in security. Install a Snooping tool to OTP network in this treatise, and because using Cain, enforce ARP Cache poisoning attack and confirm limitation by Snooping about user password. Wish to propose new system that can apply Tokenless OTP by new security way, and secure confidentiality and integrity. Do test for access control inflecting Tokenless OTP at Remote Access from outside, and could worm and do interface control with certification system in hundred. Even if encounter hacking at certification process, thing that connection is impossible without pin number that only user knows confirmed. Because becoming defense about outward flow and misuse and hacking of password when apply this result Tokenless OTP, solidify security, and evaluated by security system that heighten safety.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.16 no.9
• /
• pp.6282-6289
• /
• 2015

Today, there is an increasing number of cases in which certificate information is leak, and accordingly, electronic finance frauds are prevailing. As certificate and private key a file-based medium, are easily accessible and duplicated, they are vulnerable to information leaking crimes by cyber-attack using malignant codes such as pharming, phishing and smishing. Therefore, the use of security token and storage toke' has been encouraged as they are much safer medium, but the actual users are only minimal due to the reasons such as the risk of loss, high costs and so on. This thesis, in an effort to solve above-mentioned problems and to complement the shortcomings, proposes a system in which digital signature for Internet banking can be made with a simply bio-authentication process. In conclusion, it was found that the newly proposed system showed a better capability in handling financial transitions in terms of safety and convenience.

• Journal of Internet of Things and Convergence
• /
• v.9 no.6
• /
• pp.37-44
• /
• 2023

As a primary technology of Industry 4.0, human-robot collaboration (HRC) requires additional measures to ensure worker safety. Previous studies on avoiding collisions between collaborative robots and workers mainly detect collisions based on sensors and cameras attached to the robot. This method requires complex algorithms to continuously track robots, people, and objects and has the disadvantage of not being able to respond quickly to changes in the work environment. The present study was conducted to implement a web-based platform that manages collaborative robots by recognizing the emotions of workers - specifically their perception of danger - in the collaborative process. To this end, we developed a web-based application that collects and stores emotion-related brain waves via a wearable device; a deep-learning model that extracts and classifies the characteristics of neutral, positive, and negative emotions; and an Internet-of-things (IoT) interface program that controls motor operation according to classified emotions. We conducted a comparative analysis of our system's performance using a public open dataset and a dataset collected through actual measurement, achieving validation accuracies of 96.8% and 70.7%, respectively.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.21 no.8
• /
• pp.147-153
• /
• 2020

Developments in aircraft require safety verification through flight testing for many hours with prototype design and production. The test evaluation step of performing flight tests was an important process that determines the success in the development of the system. In particular, safety development through flight tests in the armed flight test is important for the development of attack helicopters. In the development of attack helicopters, the evaluation period and cost related to the armed flight test are closely related to the required ammunition requirement. Therefore, this paper presents the amount of ammunition required for the military flight test between attack helicopter developments through an analysis of the AH-1 helicopter in a similar case and ADS-44-HDBK of military specification. The AH-1 can be used to calculate the ammunition demand by considering the exclusion of redundant firing tests and configuration differences. In the case of the machine gun-equipped configuration, approximately 10,500R was required, and approximately 324R was required in the case of a rocket-mounted configuration. In addition, if the armed integrated bench is used properly, it is expected to promote efficiently the flight test in the armed flight by identifying the possible risk factors with armed flight tests and excluding them.

• Tunnel and Underground Space
• /
• v.27 no.6
• /
• pp.343-350
• /
• 2017

Amid increasingly saturated ground space, development of underground space has been booming throughout the world and excavation has been underway near the structure above or under the ground level. But the ground subsidence caused by improper or poor construction technologies, underground water leakage, sudden changes of stratum and the problem with earth retaining system component has been emerged as hot social issue. To deal with such problems nationwide, establishment of preventive and proactive disaster management and rapid restoration system has been pushed now. In this study, collection of the data on technology development trend to secure the underground safety was made, taking into account of internal change elements (changing groundwater level, damage to underground utilities, etc) and external change elements (vehicle load, earthquake and ground excavation, etc) during excavation. Amid the growing need of ground behavior analysis, ground subsidence evaluation technology, safe excavation to prevent ground subsidence and reinforcement technology, improvement of rapid restoration technology in preparation for ground subsidence and development of independent capability, this study is intended to introduce the technology development in a bid to prevent the ground subsidence during excavation. It's categorized into prediction/evaluation technology, complex detect technology, waterproof reinforcement technology, rapid restoration technology and excavation technology which, in part, has been in process now.

• Korean Security Journal
• /
• no.60
• /
• pp.9-31
• /
• 2019

Due to the development of technology and popularization of drone, the so-called "dirty drone" that exploits drones for crimes and terrorism has become a social problem, and it is time to seriously consider the "revenge of drones." Indeed, the cases of threats posed by drones are expanding not only to threats to ground facilities, but also to aviation safety threats, more recently to large-scale events, demonstrations and crimes targeting specific personnel, and terrorism. This research clearly defined the concept of anti-drone when it emerged as a new type of social safety threat as it was abused in crime and terrorism, while response to it was not enough yet. Through this process, it was intended to present an effective anti-drones system. We analyzed the major controversial elements of anti-drone, and defined them as "comprehensive response activities at the legal, institutional and technical levels performed by law enforcement agencies, related technology and industrial entities in a way that prevents, detects, and blocks acts that violate public well-being and order, such as crimes and terrorism caused by the drones." To effectively respond to dirty drones, the authority of law enforcement agencies and the enactment of relevant laws were proposed. In the future, a comprehensive and systematic follow-up study of the anti system should be conducted.

• Journal of the Korean Society of Marine Environment & Safety
• /
• v.20 no.1
• /
• pp.113-119
• /
• 2014

Recently, R.O.K. Navy is increasing re-usability of design data and application of M&S(Modeling and Simulation) through the establishment of collaborative product development environment focused on Naval Ship Product Model(NSPM). As a result, the reliability of the result of design is getting better, and furthermore, a study to improve quality of construction through simulation of production/operation is in progress. Accordingly, the database construction of design data and the DB(Database) quality become important, but there was not research related to those or it was just initial state. This paper conducted research about system of the quality verification process of shape elements which compose NSPM based on the quality verification guideline of NSPM as the result of the precedent study. The hull surface was limited as verification object. The study to verify two things that application of basic drawing by the cad model of hull surface, and whether there is error in the geometric quality of cad model was progressed. To achieve this goal, the verification criteria and algorithm were defined and the prototype system which is based on was developed.