• Journal of the Korean Society of Propulsion Engineers
• /
• v.23 no.6
• /
• pp.1-10
• /
• 2019

The wave motion inside the nozzle is known as one of the major damping elements of the rocket's combustion instability by it's aeroacoustic effects that result from the flow passage through the nozzle throat. These effects can be quantitatively evaluated by the nozzle admittance. In this study, one-dimensional linearized Euler equation was adopted to calculate the nozzle admittance, and trend analysis was performed depending on the nozzle's main design variables. As a result, when nozzle converging part shortens, it is verified that the frequency dependency of the nozzle admittance is decreased due to the widened frequency range with lowered longitudinal nozzle admittance. Also, admittance estimation using the short nozzle theory is not appropriate when the first tangential mode of the pressure perturbation arises.

• Physical Therapy Korea
• /
• v.22 no.3
• /
• pp.41-49
• /
• 2015

This study aimed to evaluate the surface area and velocity of center of pressure (COP) during one leg standing by stimulating the sensory system in normal adults. Thirty subjects were enrolled in this study. Subjects were asked to stand on one leg during testing conditions. Testing conditions included 6 different sensory stimulations as follows: eyes opened, eyes closed, eyes opened with vibrator, eyes opened with head-mounted display (HMD), eyes opened with vibrator and HMD, and eyes closed with vibrator. During each testing condition, the surface area and velocity of center of pressure were measured. There were significant differences in the mean surface area and the mean velocity of COP between the "eyes opened" condition and the other five testing conditions (p<.05). However, in the comparison between the "eyes closed" and "eyes opened with HMD" conditions, there were no significant differences in the tested parameters. This study shows that closing eyes or keeping eyes opened while using HMD to experience virtual reality has the same effect on one leg standing balance. This finding should be considered in the evaluation or intervention of balance, especially one leg standing balance and balance while standing with a small base of support.

• The Transactions of the Korean Institute of Power Electronics
• /
• v.14 no.2
• /
• pp.89-95
• /
• 2009

Tracking the Maximum Power Point(MPP) of a photovoltaic(PV) array is usually an essential part of a PV system. The problem considered by MPPT techniques is to find the voltage $V_{MPP}$ or current $I_{MPP}$ at which a PV array should operate to generate the maximum power output PMPP under a given temperature and irradiance. The MPPT control methods, such as the perturb and observe method and the incremental conductance method require microprocessor or DSP to determine if the duty cycle should be increased or not. This paper proposes a simple and fast analog MPPT method. The proposed control scheme will track the MPP very fast and its hardware implementation is so simple, compared with the conventional techniques. The new algorithm has successfully tracked the MPP, even in case of rapidly changing atmospheric conditions, and Has higher efficiency than ordinary algorithms.

• Journal of Positioning, Navigation, and Timing
• /
• v.7 no.1
• /
• pp.37-42
• /
• 2018

This paper proposed a microstrip antenna that can perform jamming of satellite signals from the GPS L5, GLONASS G3, BDS B2 frequency bands (1164 - 1217 MHz) that are employed mainly for military purposes among the GNSS frequencies using unmanned aircrafts over the enemy's sky in time of emergency. The single element in the proposed antenna can be easily mounted to unmanned aircrafts. This study analyzed the characteristics of miniaturization and beam of radiating elements by applying the image theories and perturbation effect to satisfy the uniform level at ${\pm}45^{\circ}$ of beam steering goal due to the phase delay after antenna array. The designed microstrip antenna had a miniaturized radiating element area (x-y plane), which was reduced by 76.3% compared to that of basic microstrip antenna, and its beam width was $190^{\circ}$ in the E-plane and $140^{\circ}$ in the H plane. In addition, the simulation was conducted to determine the characteristics due to the phase delay by arranging the designed single microstrip antenna by $1{\times}4$ array and the results showed that beam steering of ${\pm}45^{\circ}$ is possible in the H-plane on the basis of $0^{\circ}$. Thus, the proposed antenna was verified to be effective in satellite signal jamming in the air as it was attached to the lower end of unmanned aircrafts.

• Atmosphere
• /
• v.16 no.4
• /
• pp.303-318
• /
• 2006

A parameterization of gravity wave drag induced by cumulus convection (GWDC) proposed by Chun and Baik is implemented in the KMA operational global NWP model (GDAPS), and effects of the GWDC on the forecast for July 2005 by GDAPS are investigated. The forecast result is compared with NCEP final analyses data (FNL) and model's own analysis data. Cloud-top gravity wave stresses are concentrated in the tropical region, and the resultant forcing by the GWDC is strong in the tropical upper troposphere and lower stratosphere. Nevertheless, the effect of the GWDC is strong in the mid- to high latitudes of Southern Hemisphere and high latitudes of Northern Hemisphere. By examining the effect of the GWDC on the amplitude of the geopotential height perturbation with zonal wavenumbers 1-3, it is found that impact of the GWDC is extended to the high latitudes through the change of planetary wave activity, which is maximum in the winter hemisphere. The GWDC reduces the amplitude of zonal wavenumber 1 but increases wavenumber 2 in the winter hemisphere. This change alleviates model biases in the zonal wind not only in the lower stratosphere where the GWDC is imposed, but also in the whole troposphere, especially in the mid- to high latitudes of Southern Hemisphere. By examining root mean square error, it is found that the GWDC parameterization improves GDAPS forecast skill in the Southern Hemisphere before 7 days and partially in the Northern Hemisphere after about 5 days.

• Transactions of the Korean Society of Mechanical Engineers B
• /
• v.37 no.2
• /
• pp.187-196
• /
• 2013

A numerical model was developed to predict the density wave oscillation (DWO) in the furnace wall tubes of a fossil-fired once-through boiler. The transient flow fields in the tubes were obtained using a 1D finite volume method in the time domain. A header model was also implemented to simulate the parallel tube connection of the wall tubes. The inlet and outlet mass flow variation in one of the parallel tubes was examined after a heat perturbation to find the DWO. After successful verification with experimental results reported in literature, the developed model was applied to the wall tubes of a 700-MW boiler furnace. In contrast to the simulation of Takitani's experiment, in which the unstable power thresholds tended to rise in the reduced bypass channel flow, no remarkable changes were observed in the power thresholds in the parallel channel modeling of the wall tubes of the boiler furnace.

• The Transactions of The Korean Institute of Electrical Engineers
• /
• v.58 no.1
• /
• pp.147-154
• /
• 2009

This paper presents a grating~integrated SPR (Surface Plasmon Resonance) sensor chip for simple and inexpensive biomolecule detection. The grating-integrated SPR sensor chip has two sensing channels having a nano grating for SPR coupling. An external mirror is used for multi channel SPR sensing. The present sensor chip replaces bulky and expensive optical components, such as fiber-optic switches or special shaped prisms, resulting in a simple and inexpensive wavelength modulated multi-channel SPR sensing system. We fabricate a SPR sensor chip integrated with 835 nm-pitch gratings by a micromolding technique to reduce the fabrication cost. In the experimental characterization, the refractive index sensitivity of each sensing channel is measured as $321.8{\pm}8.1nm$/RI and $514.3{\pm}8.lnm$/RI, respectively. 0.5uM of the target biomolecule (streptavidin) was detected by a $1.13{\pm}0.16nm$ shift of the SPR dip in the 10%-biotinylated sample channel, while the SPR dip in the reference channel for environmental perturbation monitoring remained at the same position. From the experimental results, multi-channel biomolecule detection capability of the present grating-integrated SPR sensor chip has been verified. On the basis of the preliminary experiments, we successfully measured the binding reaction rate for the $2\;nM{\sim}200\;nM$ monoclonal-antibiotin, thus verifying biomolecule concentration detectability of the present SPR sensor chip. The binding reaction rates measured from the present SPR sensor chip agredd well with those from a commercialized SPR sensor.

• Proceedings of the Mineralogical Society of Korea Conference
• /
• 2000.05a
• /
• pp.19-19
• /
• 2000

;Ultramafic xenoliths found in alkali basalts from Jeju-do, Korea are mostly spinel Iherzolites composed of olivine, orthopyroxene, clinopyroxene and spinel. A subordinate amount of spinel harzburgites and pyroxenites are also found. Temperatures for these xenoliths were estimated from the compositions of coexisting pyroxenes (Wood '||'&'||' Banno 1973; Wells 1977; Bertrand '||'&'||' Mercier 1985; Brey '||'&'||' Kohler 1990), the AI-solubility in orthopyroxene coexisting with olivine and spinel (Sachtleben '||'&'||' Seck 1981; Webb '||'&'||' Wood 1986), and from Fe/Mg partitioning between olivine and spinel (Ballhaus et al. 1991). Temperature estimates from the thermometers by Wells (1977) and Brey and Kohler (1990) are compatible. Average equilibrium temperatures by these two methods for spinel peridotites range from 890 to 1030$^{\circ}$C. Pressures for spinel peridotites were estimated from the geobarometer by Kohler and Brey (1991) derived from the equilibrium Ca content of olivine coexisting with clinopyroxene, and fall within the range of 12.9 to 26.3 kbar. The combination of the thermometer by Brey and Kohler (1990) and the geobarometer by Kohler and Brey (1991) yields P- T estimates for Jeju-do spinel peridotites that fall in experimentally determined spinel lherzolite field in CFMASCr system (O'Neill 1981). These P-T data sets have been used to construct the Quaternary Jeju-do geotherm, which is significantly different from the conventional conductive geotherm. The xenolith-derived geotherm has a higher T gradient at low P (13 kbar) than at high P, which may be due to perturbation of the conductive heat flow by magma underplating or overplating at the crust-mantle boundary. Temperature estimates and statistics on the xenoliths indicate that the crust/mantle boundary in Jeju-do lies at about 11 kbar (~39 km). Spinellherzolite is inferred as a main constituent rock of the uppermost lithospheric mantle beneath Jeju-do. Pyroxenites were intercalated in peridotites in similar depth and temperature as re-equilibrated veins or lens.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2011.02a
• /
• pp.30-30
• /
• 2011

The wave-cutoff tool is a new diagnostic method to measure electron density and electron temperature. Most of the plasma diagnostic tools have the disadvantage that their application to processing plasma where toxic and reactive gases are used gives rise to many problems such as contamination, perturbation, precision of measurement, and so on. We can minimize these problems by using the wave-cutoff method. Here, we will present the results obtained through the development of the wave-cutoff diagnostic method. The frequency spectrum characteristics of the wave-cutoff probe will be obtained experimentally and analyzed through the microwave field simulation by using the CST-MW studio simulator. The plasma parameters are measured with the wave-cutoff method in various discharge conditions and its results will be compared with the results of Langmuir probe. Another disadvantage is that other diagnostic methods spend a long time (~ a few seconds) to measure plasma parameters. In this presentation, a fast measurement method will be also introduced. The wave-cutoff probe system consists of two antennas and a network analyzer. The network analyzer provides the transmission spectrum and the reflection spectrum by frequency sweeping. The plasma parameters such as electron density and electron temperature are obtained through these spectra. The frequency sweeping time, the time resolution of the wave-cutoff method, is about 1 second. A short pulse with a broad band spectrum of a few GHz is used with an oscilloscope to acquire the spectra data in a short time. The data acquisition time can be reduced with this method. Here, the plasma parameter measurement methods, Langmuir probe, pulsed wave-cutoff method and frequency sweeping wave-cutoff method, are compared. The measurement results are well matched. The real time resolution is less than 1 ?sec. The pulsed wave-cutoff technique is found to be very useful in the transient plasmas such as pulsed plasma and tokamak edge plasma.

• Journal of the Korean Society of Laryngology, Phoniatrics and Logopedics
• /
• v.26 no.2
• /
• pp.104-111
• /
• 2015

Background and Objectives : Acoustic analysis of voice could be influenced so much by the quality of voice files which were recorded by recording device. In clinical practice, voice files that were recorded by analysis program directly or portable digital recording device were analyzed mostly. This study examined the feasibility of using Galaxy smartphone recordings for acoustic analysis of voice. Materials and Methods : Acoustic measures were compared between voice signals recorded from 30 normal speakers (15 males and 15 females) through Galaxy smartphone, portable digital recording device and CSL. Fo, jitter, shimmer, NHR (Noise-Harmony ratio) and Formant frequencies were analyzed by MDVP. Results : Fo, Jitter, Shimmer, NHR and formant frequencies from 3 devices were no significantly difference. The intraclass correlation coefficient (ICC) was higher between each of the voice perturbation measures. Conclusion : The findings indicated that Galaxy smartphone recording system was useful device for acoustic analysis of voice. Furthermore, Galaxy smartphone can be applied widely in various way for acoustic analysis of voice.