• 한국시뮬레이션학회논문지
• /
• 제29권2호
• /
• pp.63-72
• /
• 2020

다양한 무기체계 중 대표적인 지상 무기체계인 전차는 각국의 핵심 전력 중 하나로, 전차의 운용 개념과 효과도 분석을 통해 과학적 분석 기반의 비용 효과적인 연구개발을 할 수 있다. 이를 위하여 교전 시뮬레이션 기술이 활용될 수 있는데, 전차 무기체계를 모델링함에 있어 전차의 기동, 통신 등과 같은 물리적인 요소뿐만 아니라, 운용교리를 반영한 효과분석을 위하여 전차장 등의 의사결정을 모델링하는 논리 모델도 중요하다. 이 논문에서는 무기체계 통합시뮬레이션 소프트웨어(AddSIM)에서 제공하는 무기체계 모델의 표준 아키텍처인 기본체계모델(Base System Model, BSM)에 맞추어 전차 교전 시뮬레이션에 필요한 전차 BSM 설계방법에 대하여 논한다. 특히 논리 모델을 인간 의사결정 모델에 근거하여 세분화하였으며, DEVS 형식론이라는 수학적 형식론에 기반한 정형적인 모델링 방법으로 모델링하였다. 그 결과 전차 BSM을 계층적이고 모듈화된 형태로 제안하였다. 제안하는 방법은 향후 우리 군의 전차 운용 개념 연구와 전차의 효과분석 등에 활용될 것으로 기대된다.

• 한국전자거래학회지
• /
• 제12권3호
• /
• pp.19-31
• /
• 2007

본 논문에서는 앞으로 국가의 RFID를 이용하여 물품자산을 관리할 수 있는 국가물품식별코드의 운용방안을 제시한다. 첫째, 국가에서 수행하는 물품자산관리체계의 운용체계를 제시한다. 둘째, 상품구매와 물품자산 관리간의 연계성을 고려하여 ISO/IEC 15459를 따르는 국가물품식별코드체계의 구조를 제시한다. 그리고 이 식별코드체계를 ISO/IEC 18000-6C 태그에 인코딩하는 방안을 제시한다. 셋째, 상품구매 및 물품자산관리 단계에서 국가물품식별코드를 생성 및 관리하기 위한 운용 업무 프로세스를 제시한다.

• 제어로봇시스템학회논문지
• /
• 제13권7호
• /
• pp.694-702
• /
• 2007

The SSWM(Software Switching Mechanism) of I-processor concept using non-real time in-house software simulation program is an effective method in order to develop the flight control law in desktop or HQS environment. And, this system has some advantages compare to HSWM(Hardware Switching Mechanism) such as remove the time delay effectiveness and reduce the costs of development. But, if this system loading to the OFP(Operational Flight Program), the OFP guarantee the enough throughput in order to calculate the two control law at once. Therefore, the HSWM(Hardware Switching Mechanism) of 2-processor concept is necessary. This paper addresses the concept of HSWM of the HQS-PC interface using TCP/IP(Transmission Control Protocol/Internet Protocol) communication based on flight control law of advanced supersonic trainer. And, the fader logic of TFS(Transient Free Switch) and stand-by mode of reset '0' type are designed in order to reduce the abrupt transient response and minimize the integrator effect in pitch axis. The result of the analysis based on HQS pilot simulation using HSWM reveals that the flight control systems are switching between two computers without any problem.

• 시스템엔지니어링학술지
• /
• 제4권1호
• /
• pp.35-43
• /
• 2008

Generally, in analysis of reliability of Design and Development Phase, reliability of electrical components is analyzed based on standards such as MIL-HDBK-217F, Bellcore Issue 4,5,6 by analyzing stress of architectural side (Power, Voltage, Current and quality level of components) of weapon system and stress of operational side (operational environment, operational temperature, Operational Profile). But the reliability of mechanical components is analyzed based on the data book of failure history of mechanical parts called NPRD-95(Nonelectronic Parts Reliability Data-95) without any analysis of above stress. However, even if it's the same mechanical parts, it might have different failure rate(fatigue, wear, corrosion) during operation depending on how weary(stress : pressure, vibration, temperature during operation) the parts are. Therefore, analyzing reliability using just data book can cause big difference in reliability instead of analyzing based upon stressfulness that parts might have, operational concept, and other various factors. Thus, This paper will guide the way of predicting reliability by organizing ways of predicting reliability for system organization and adopt ing NSWC-98/LE1(Naval Surface Warfare Center-98/LE1) for mechanical components.

• 한국정밀공학회지
• /
• 제19권11호
• /
• pp.46-53
• /
• 2002

In order to overcome the conventional robot's physical limitation to frequent changes in operational requirements, it is quite appealing to modularize its system components and allow them to be combined into various configurations to best suit the needs to a particular application. Several researchers have presented the concept of modular robot. In this paper, the kinematics and dynamics of modular robot are studied, which concretes the concept of modular robot. This study includes the selection of individual module, the definition of their parameters and the development of module based manipulate. analysis software package (MBMAP).

• 한국항만학회지
• /
• 제5권1호
• /
• pp.3-22
• /
• 1991

In recent years the hatchcoverless(or open-top) containerships have been evolving as a promising new concept for enhanced containership operations. The design concept of the hatchcoverless containership is innovative and appears to be worthwhile. especially from an operational viewpoint. The hatchcover and container lashing system have been eliminated and the containers are stacked in open hold fitted with cell guides. Thus this design concept can provide a more efficient and economically viable fleet due to the reduced time and cost of loading and unloading operations. Therefore turnaround time in port is also greatly reduced. This examination provides. brief background, advantages, brief review of new building containership, highlights of the pertinent areas requiring special consideration and recommendations of possible analyses herein.

• 한국전자거래학회지
• /
• 제3권2호
• /
• pp.203-217
• /
• 1998

Supply chain management is defined as "an integrative philosophy to manage the total flow of a distribution channel from the supplier to the ultimate user". There are many differences between traditional systems and supply chain management systems, There are so many advantages applying SCM concept in inventory management field from the viewpoint of information sharing. While each firm try to optimize the inventory individually in traditional systems, SCM focus on optimizing the channel-wide-inventory making effort to reduce the inventory interrelatedly, The more complex your network of suppliers, manufacturers, and distributors, the more you are likely to gain operational efficiencies by attending on inventory management. The inventory stockpiles at the various sites, including both incoming materials and finished products, have complex interrelationships. Efficient and effective management of inventory throughout the supply chain significantly improves the ultimate service provided to the customer. The purpose of this thesis is to develop the integrated inventory management system for the control of channel-wide inventory on the intranet by applying SCM concept.

• 한국항공우주학회지
• /
• 제48권12호
• /
• pp.1021-1031
• /
• 2020

인공지능, 자율항법 등 4차 산업의 기술들이 발전하면서 도심항공교통(UAM)이 도심의 교통 체증에 대한 효과적인 대안으로 고려되고 있으며, 한국을 비롯한 세계의 많은 기업들이 비행체 개발과 운용 체계 연구를 수행하고 있다. 본 연구에서는 도심항공교통의 운용에 필요한 요소들을 식별, 분류한 뒤 운용 체계 개념을 수립하였으며, 각 요소별로 세부적 고려사항들을 분석하였다. 운용 체계 개념 분석 결과를 기반으로 서울시와 경인권을 연결하는 도심항공교통 운항경로를 구축하였으며, 비행체의 성능 분석을 통하여 구축된 운항경로가 운용이 가능함을 확인하였다. 본 경로 분석연구는 추후 국내 여러 도시의 도심항공교통 운항경로 수립에 적용이 가능할 것으로 예측된다.

• 문화기술의 융합
• /
• 제10권5호
• /
• pp.181-188
• /
• 2024

본 연구는 급변하는 안보환경에 대응하기 위해 미국에서 적용 중인 임무공학(Mission Engineering) 개념과 방법론을 한국의 국방기획관리체계에 도입하는 방안을 모색하였다. 이를 위해 문헌연구와 선행연구 분석, 사례분석, 심층그룹인터뷰(FGI) 등을 통해 임무공학의 핵심요소를 도출하고, 이를 바탕으로 한국군의 소요기획과 신속 획득체계 개선방안을 제시하였다. 연구 결과, 운용개념, 요구성능(능력), 획득이 임무공학 적용을 위한 3대 핵심요소로 식별되었다. 개선방안으로는 임무 중심의 소요기획 체계로의 전환, 운용개념 작성 시 임무공학 방법론 적용, 의사결정 지원을 통한 획득기간 단축, 신속 획득을 위한 예산 배정 및 소요군 역량 강화 등이 제안되었다. 본 연구는 임무공학의 필요성과 적용 가능성을 확인하고, 향후 국방기획관리체계 발전을 위한 기초자료로 활용될 수 있을 것으로 기대된다.

• 산업경영시스템학회지
• /
• 제21권47호
• /
• pp.57-68
• /
• 1998

Work environments have been changed with the advent of new technologies, such as computer technology. However, human cognitive limits can't pace up with the change of work environment. Designing human-computer system requires knowledge and evaluation of the human cognitive processes which control information flow workload. Futhermore, under limited reaction time and/or urgent situation, human operator may the work stress, work error and resultant deleterious work environment. This paper evaluate the visual factors of major information processing factors(information density, amount of information, operational speed of speed)on operator performance of supervisory control under urgent(limited reaction time)environments which require deleterious work condition. To describe the work performance int the urgent work situations with time stress and dynamic event occurrence, a new concept of information density was introduced. For a series of experiments performed for this study, three independent variables(information amount, system proceeding speed, information density) were evaluated using five dependent variables. The result of statistical analyses indicate that the amount of information affected on all of five dependent measure. Number of failure and number of secondary task score were influenced by both amount of information and operational speed of system. However reaction time of secondary task were affected by both amount of information and information density. As a result, the deleterious factors for the performances seemed to be a scanning time to supervise each control panel. Consequently, a new display panel was suggest to reduce operator work load for scanning task showing better operator performance.