• 전력전자학회논문지
• /
• 제9권6호
• /
• pp.628-634
• /
• 2004

차량용 전조등에 사용되어지는 HID(High Intensity Discharge) 발라스트(Ballast)의 특성 개선을 위하여 소프트 스위칭 방식의 멀티 레벨 인버터를 적용하였다. 멀티레벨 인버터의 모드(Mode)별 특성을 해석하고, 그 결과를 통해 발라스트의 출력 특성을 해석하고 시스템을 설계하였다. 그리고 실험을 통하여 해석결과를 확인하였다.

• Nuclear Engineering and Technology
• /
• 제51권1호
• /
• pp.163-169
• /
• 2019

The robust controller synthesis and analysis of the water level process in the U-tube system generator (UTSG) is addressed in this paper. The parameter uncertainties of the steam generator (SG) are modeled as multiplicative perturbations which are normalized by designing suitable weighting functions. The relative errors of the nominal SG model with respect to the other operating power level models are employed to specify the weighting functions for normalizing the plant uncertainties. Then, a robust controller is designed based on ${\mu}$-synthesis and D-K iteration, and its stability robustness is verified over the whole range of power operations. A gain-scheduled controller with $H_{\infty}$-synthesis is also designed to compare its robustness with the proposed controller. The stability analysis is accomplished and compared with the previous QFT design. The ${\mu}$-analysis of the system shows that the proposed controller has a favorable stability robustness for the whole range of operating power conditions. The proposed controller response is simulated against the power level deviation in start-up and shutdown stages and compared with the other concerning controllers.

• 한국군사과학기술학회지
• /
• 제4권1호
• /
• pp.246-254
• /
• 2001

The breech system can be considered as a pressure vessel with an internal plug under high explosive pressure. The system consists of a breech block(internal plug) whose front surface subjects to pressure, and a breech ring(pressure vessel). There is the geometric discontinuity around roots of connection parts and then stress concentration is introduced due to pressure, where contact effect may be ignored because contact plane between two equipments is parallel ideally, Generally high stress concentration phenomena shorten the life cycle of the mechanical system. It is well known that shock load is much more harmful on safety of the system than static load. In this present paper, several geometric design variables which may affect stress condition on the system are chosen and the parametric study on the design variables is carried using commercial FEM codes. Finally, the obtained results in the single lug breech system are applied to design the 3 lugs breech system. The 3 lugs breech system can reduce the maximum stress level.

• 시스템엔지니어링학술지
• /
• 제17권2호
• /
• pp.23-36
• /
• 2021

Recently, the rapid development of drones is increasing as a variety of threats to important facilities of the country. In order to build an anti-drone system that responds to drones with high technical characteristics, standardization is required in terms of operation, system, and technology. By applying the defense architecture framework, it contributes to the establishment of the optimal system by proposing a standardization plan for the operational and system perspectives of the anti-drone system by creating outputs equivalent to the stage of prior research on weapons systems. It is a prerequisite for building a drone system the operational concept of the anti-drone system, the definition of the drone threat, the function of each component, the interface, the definition of data flow, the system performance and effect scale, etc. Management, security officers, and equipment manufacturers of important national and public facilities on site expect that it will be used as an objective standard at the government level for the component technology of the equipment to respond to the drone threat and the performance required in the environment.

• 한국정밀공학회지
• /
• 제22권11호
• /
• pp.59-63
• /
• 2005

Since human listening is very sensitive when the sound hit him, the subjective index of sound quality is required. Therefore, at each situation of sound evaluation its composed with the sound quality factor. But, when substituting the level of one frequency band we could not see the tendency of substitution at whole frequency band during the sound quality evaluation. In this study a design of experiment is used. The frequency domain is divided into an equally 12 parts and each level of domain whether is given increase or decrease due to the change of frequency band based on 'sharp' and 'annoy' of the sound quality is analyzed. By using the design of experiment the number of test is reduce very effectively by the number of experiment and each band the main effect will be as a solution. The case of sound quality for 'sharp' and 'annoy' at each band, the change of band (increase or decrease of sound pressure or keep maintain) which will be the most effects on the characteristics of sound quality can be identify and this will be able to us to select the objective frequency band. Through these obtained results the physical changes of level at arbitrary frequency domain sensitivity can be adapted.

• 방사성폐기물학회지
• /
• 제9권2호
• /
• pp.87-92
• /
• 2011

본 논문은 극저준위폐기물 관리에 관한 중국의 정책과 규정들을 소개하고 있다. 오래된 시설의 중요한 해체 및 부지복구 프로그램에 주어진 바와 같이, 극저준위폐기물의 처분을 위한 새로운 시설의 필요성이 대두되고 있다. 여러가지 일반적인 설계원리들은 다중방벽에 의해 폐기물을 격리시키는 중저준위폐기물 처분시설과 같다. 콘크리트 방벽을 사용하는 것 대신에 벤토나이트 또는 고밀도 폴리에틸렌 멤브레인을 사용하는 것 외에 통상적으로 처분시설의 설계는 위해폐기물 처분시설의 설계와 같다 극저준위폐기물 처분시설 2개소의 공학적 설계가 소개되었다.

• 한국마이크로전자및패키징학회:학술대회논문집
• /
• 한국마이크로전자및패키징학회 2002년도 International Symposium
• /
• pp.219-225
• /
• 2002

This paper presents a novel "bumpless flip chip package"for cost! performance driven devices. Using the conventional electroplating and etching processes, this package enables the production of fine pitch BGA up to 256 I/O with single layer routing. An array of circuitry down to $25-50{\mu}{\textrm}{m}$ line/space is fabricated to fan-in and fan-out of the bond pads without using bumps or substrate. Various types of joint methods can be applied to connect the fine trace and the bond pad directly. The resin-filled terminal provides excellent compliancy between package and the assembled board. More interestingly, the thin film routing is similar to wafer level packaging whereas the fan-out feature enables high lead count devices to be accommodated in the BGA format. Details of the design concepts and processing technology for this novel package are discussed. Trade offs to meet various cost or performance goals for selected applications are suggested. Finally, the importance of design integration early in the technology development cycle with die-level and system-level design teams is highlighted as critical to an optimal design for performance and cost.

• 한국정보통신학회논문지
• /
• 제24권2호
• /
• pp.198-203
• /
• 2020

본 논문에서는 소규모 강의 범람 예측을 위한 인공 수위 예측 시스템을 제안한다. 강의 수위 예측은 홍수 피해를 줄일 수 있는 대책이 될 수 있다. 그러나 하천 범람에 영향을 미치는 강 또는 강우의 고유 특성으로 인해 범람 모델을 구축하기가 어렵다. 일반적으로 하류 수위는 상류의 인접한 수위에 영향을 받는다. 따라서 본 연구에서는 측정 지점에서 수위를 예측하기 위해 두 개의 상류 측정 지점의 수위를 순환신경망(LSTM)을 사용하여 인공 지능 모델을 구축했다. 제안 된 인공 지능 시스템은 수위 측정기를 설계하고 Nodejs를 사용하여 서버를 구축했다. 제안 된 신경망 하드웨어 시스템은 실제 강에서 6시간마다 수위를 잘 예측함을 알 수 있었다.

• 디지털산업정보학회논문지
• /
• 제17권3호
• /
• pp.9-15
• /
• 2021

In this paper, the Embedded MEMS system to the power apparatus used Edge Impulse machine learning tools and therefore an improved predictive system design is implemented. The proposed MEMS embedded system is developed based on nRF52840 system and the sensor with 3-Axis Digital Magnetometer, I2C interface and magnetic measurable range ±120 uT, BM1422AGMV which incorporates magneto impedance elements to detect magnetic field and the ARM M4 32-bit processor controller circuit in a small package. The MEMS embedded platform is consisted with Edge Impulse Machine Learning and system driver implementation between hardware and software drivers using SensorQ which is special queue including user application temporary sensor data. In this paper by experimenting, TensorFlow machine learning training output is applied to the power apparatus for analyzing the status such as "Normal, Warning, Hazard" and predicting the performance at level of 99.6% accuracy and 0.01 loss.

• 한국시뮬레이션학회:학술대회논문집
• /
• 한국시뮬레이션학회 1999년도 추계학술대회 논문집
• /
• pp.41-45
• /
• 1999

본 논문에서는 소프트웨어 시스템의 설계 및 구현 과정에서 있을 수 있는 설계 변경 및 이에 따른 다른 변경 요인들을 정확하게 파악하고, 구현상의 변경으로 인한 전체 시스템이 영향 등을 체계적으로 정립하는 소프트웨어 설계 방법론을 특정 공정의 사용자 인터페이스 시스템을 통해 제시하였다. 대상 시스템, 즉 인터페이스 시스템을 시스템 이론(System theory)에서 정의하는 구조적 입출력 시스템 레벨(Structural I/O System level)의 요소들로 표현하고 다시 구조적 입출력 시스템 레벨을 입출력 시스템 레벨(I/O System level)로 변환하였다. 이를 다시 DEVS 모델로 재구성하여 DEVS(Discrete EVent system Specification) 시뮬레이션 환경에서 제공하는 시뮬레이터를 통하여 대상 시스템의 중요한 동적 특성을 소프트웨어 초기설계 시 또는 설계 변경 후 미리 파악할 수 있도록 하였다.