• 한국건설순환자원학회논문집
• /
• 제8권1호
• /
• pp.72-78
• /
• 2020

본 연구에서는 그물망 형태의 터널 지보용 섬유 및 섬유 그물망 지보재용 숏크리트를 포함하는 터널 지보용 섬유 그물망 지보재와 지보재간의 일체화 기술로 구성된 숏크리트용 섬유 그물망 일체형 터널 지보시스템을 개발하였다. 또한, 개발된 터널 지보시스템의 현장 적용성을 평가하고 강섬유 보강 숏크리트의 성능과 비교하기 위하여, 터널 모사 구조물을 대상으로 부재 실험(mock-up test)이 수행되었다. 그 결과, 굵은 골재가 포함된 숏크리트(S20A5RP10-C)의 경우 섬유 그물망과의 부착성능 저하로 인해 2차 숏크리트가 시공 도중 탈락됨으로써 과도한 리바운드율이 발생되었으며, 강섬유 보강 숏크리트의 경우 강섬유의 뭉침 현상 및 압송성 저하로 인해 숏크리트의 타설량이 목표치에 미치지 못하였다. 한편, 본 연구를 통해 개발된 모르타르 숏크리트(S20A5RP10-M)의 타설량 및 섬유 그물망의 설치 위치가 목표치에 거의 근접하였으며, 강섬유 보강 숏크리트에 비해 낮은 리바운드율이 발생하였다.

• 대한전자공학회논문지SD
• /
• 제44권11호
• /
• pp.109-118
• /
• 2007

SoC의 집적도와 동작 속도의 증가로 인하여 지연 고장 테스트의 중요성이 더욱 커지고 있다. 본 논문은 천이 지연 고장 테스트를 지원하는 개선된 IEEE 1500 래퍼 셀 구조와 IEEE 1149.1 TAP 제어기를 이용하기 위한 인터페이스 회로를 제시하고 이를 이용한 테스트 방법을 제안 한다. 제안 하는 셀 구조는 한 번의 테스트 명령어를 이용하여 상승 지연 고장 테스트와 하강 지연 고장 테스트를 연속적으로 수행 할 수 기능을 유지하면서 기존의 셀 구조에 비하여 적은 면적 오버헤드를 가지며 테스트 시간을 줄일 수 있다. 또한 다른 클럭으로 동작하는 코어에 대한 테스트를 동시에 수행 할 수 있다.

• Journal of Electrical Engineering and Technology
• /
• 제4권4호
• /
• pp.515-520
• /
• 2009

According to the operating characteristics of pump applications, they should exhibit high efficiency and energy saving capabilities throughout the whole operating process. A novel efficiency optimization control strategy is presented here to meet the high efficiency demand of a variable speed Permanent Magnet Synchronous Motor (PMSM). The core of this strategy is the excellent integration of mended maximum torque to the current control algorithm, based on the losses model during the dynamic and the grade search method with changed step by fuzzy logic during the steady. The performance experiments for the control system of a variable speed high efficiency PMSM have been completed. The test results verified that the system can reliably operate with a different control strategy during dynamic and steady operation, and the system exhibits better performance when using the efficiency-optimization control.

• International Journal of Aeronautical and Space Sciences
• /
• 제7권2호
• /
• pp.155-174
• /
• 2006

Parabolized stability equations for compressible flows in general curvilinear coordinate system are derived to deal with a broad range of transition prediction problems on complex geometry. A highly accurate finite difference PSE code has been developed using an implicit marching procedure. Compressible and incompressible flat plate flow stability under two-dimensional and three¬dimensional disturbances has been investigated to test the present code. Results of the present computation are found to be in good agreement with the multiple scale analysis and DNS data. Stability calculation results by the present PSE code for compressible boundary layer at Mach numbers ranging from 0.02 to 1.5 are also presented and are again seen to be as accurate as the spectral method.

• 대한디지털의료영상학회논문지
• /
• 제10권2호
• /
• pp.33-37
• /
• 2008

To keep the online medical records available to anyone without constraint of time and space, introducing EMR (Electronic medical record), which is a clinical support management system. The purpose of this study is to develop interface standard of clinical test device. Integration and sharing of medical information is faced with enormous obstacles because medical organizations and associated companies are separately developing the interface. I hope that multi-function management system with workstation concept is operated to efficiently transmit clinical device result data based on this study. Transfer of precise medical result data available for decision making will improve quality of health care service.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• 제6권1호
• /
• pp.46-63
• /
• 2012

The concept of an "intelligent building" received significant attention from academic, industry and standard development organizations when technically termed a building management system (BMS). Wireless sensor networks (WSNs) and their recent development enhanced monitoring and control applications for the building's areas. This paper surveys and analyzes advantages of the main current and emerging approaches that may be fit for BMS. Specifically, we discuss challenges including interoperability, integration, overhead, and bandwidth limitation of WSNs in BMS. Based on analyses, we highlight the advantages of an IP-based and RESTful architecture approach as the most suitable solution for BMS using WSNs (BMS-WSN). The paper also describes our future direction and design for BMS-WSN based on these advantages. The purpose is to enable interaction of users with BMS-WSN in the same way as with any website while ensuring energy efficiency. A test-bed implementation and evaluation of a BMS application is also introduced in this paper to demonstrate the feasibility and benefits of IP-based and RESTful architecture for BMS.

• 대한원격탐사학회지
• /
• 제26권6호
• /
• pp.645-652
• /
• 2010

The performance of the payload Electro-Optical System (EOS) in satellite system is affected by various factors, such as optics design, camera electronics design, and the characteristics of the CCD (Charge Coupled Device) used, etc. Of these factors, the camera electronics design is somewhat unique in that its operational parameters can be adjusted even after the satellite launch. In this paper, the effect of video gain on the non-uniformity correction performance is addressed. And a new optimal non-uniformity correction scheme is proposed and analyzed using the data from real camera electronics unit based on a TDI (Time Delayed Integration) type of CCD. The test results show that the performance of the conventional non-uniformity correction scheme is affected significantly when the video gain is added. On the other hand, in our proposed scheme, the performance is not dependent on the video gain. The insensitivity of the non-uniformity performance on the video-gain is mainly due to the fact that the correction is performed after the dark signal is subtracted from system response.

• 전력전자학회논문지
• /
• 제27권5호
• /
• pp.397-401
• /
• 2022

The construction of the ITER tokamak machine is ongoing at a 77% process rate to achieve the first plasma in 2025. The 18 sets of power supply systems comprising 400 MVA thyristor AC/DC converters for the superconducting magnets supplied by Korea (KO) are being installed with other systems, such as PF converters (China), DC busbars (Russia), and cooling water systems (India), in two buildings (Europe). The system interfaces have been defined during the design stage, and the systems have been manufactured. However, during the on-site installation work, several installation and integration issues emerged due to the manufacturing tolerance and design mistakes. To continue the installation and testing, the engineers of each system resolved the interface issues, planned the commissioning, and integrated the test plan. This paper describes the on-site installation status and issues and the commissioning plan of KO AC/DC converters.

• 한국정보과학회:학술대회논문집
• /
• 한국정보과학회 2006년도 가을 학술발표논문집 Vol.33 No.2 (C)
• /
• pp.448-452
• /
• 2006

PLC 프로세서 모듈의 시스템 태스크는 RTOS 커널 및 PLC 어플리케이션과 유기적으로 연관되어 있기 때문에 단독으로 테스트 할 수 없고, 어플리케이션을 테스트 드라이버로 활용해야 한다. 본 논문에서는 RTOS와 PLC 어플리케이션의 통합 테스트 단계에서, 시스템 태스크를 테스트 하기 위한 테스트 드라이버를 생성하는 방안을 기술하고, 이를 원자력 발전소의 PLC 프로세서 모듈에 적용한 실험 결과를 기술한다.

• 대한토목학회논문집
• /
• 제13권4호
• /
• pp.51-64
• /
• 1993

본 연구에서는 원통형 액체저장탱크(cylindrical liquid storage tank)를 대상으로 적층(積層)고무받침(LRB)방식의 기초분리장치(base isolator)를 사용하였을 때의 진동감소효과를 분석하기 위하여 지진하중에 대한 유사동적실험(Pseudo-dynamic test)을 수행하였다. 유사동적실험을 효과적으로 수행하기 위하여 구조분할기법(substructuring technique)을 도입하여 액체저장탱크를 수치적으로 모형화하였으며 효율적인 수치적분방법을 실험알고리즘에 적용하였다.