• Korean Journal of Materials Research
• /
• v.23 no.11
• /
• pp.638-642
• /
• 2013

Chalcopyrite $CuInSe_2$(CIS) is considered to be an effective light-absorbing material for thin film photovoltaic solar cells. CIS thin films have been electrodeposited onto Mo coated and ITO glass substrates in potentiostatic mode at room temperature. The deposition mechanism of CIS thin films has been studied using the cyclic voltammetry (CV) technique. A cyclic voltammetric study was performed in unitary Cu, In, and Se systems, binary Cu-Se and In-Se systems, and a ternary Cu-In-Se system. The reduction peaks of the ITO substrate were examined in separate $Cu^{2+}$, $In^{3+}$, and $Se^{4+}$ solutions. Electrodeposition experiments were conducted with varying deposition potentials and electrolyte bath conditions. The morphological and compositional properties of the CIS thin films were examined by field emission scanning electron microscopy (FE-SEM) and energy dispersive spectroscopy (EDS). The surface morphology of as-deposited CIS films exhibits spherical and large-sized clusters. The deposition potential has a significant effect on the film morphology and/or grain size, such that the structure tended to grow according to the increase of the deposition potential. A CIS layer deposited at -0.6 V nearly approached the stoichiometric ratio of $CuIn_{0.8}Se_{1.8}$. The growth potential plays an important role in controlling the stoichiometry of CIS films.

• Proceedings of the Korean Nuclear Society Conference
• /
• 2001.10a
• /
• pp.85.1-85
• /
• 2001

• Journal of the Korean Society of Systems Engineering
• /
• v.19 no.1
• /
• pp.56-63
• /
• 2023

For the success of system development, it is necessary to systematically manage the requirements that are the basis of system development and its verification results. In order to follow the principles of SE(Systems Engineering)-based V&V(Verification&Validation) process, requirements can be managed by securing the requirements and their establishments, design compliances, and verification compliances according to the system development lifecycle. Especially, in a large-complex system research and development project, such as a space launch vehicle development project, many participants establish, verify, and validate numerous requirements together during the project. Therefore, logical and systematic requirements management, including guarantee of data integrity, change history, and traceability, is very important for multiple participants to utilize numerous requirements together without errors. This paper introduces the practical requirements and verification management for the requirements-based development process in the space launch vehicle development project.

• Proceedings of the KAIS Fall Conference
• /
• 2011.12a
• /
• pp.244-247
• /
• 2011

Transcranial Magnetic Stimulation(TMS) Navigation System은 자기 자극을 이용한 비 침습적 방법으로 통증 없이 뇌 기능의 활성화 및 재활에 필요한 자극, 자극의 위치, 환자의 모션 등을 3차원 뇌영상에 제공한다. 이 시스템에서 사용되는 소프트웨어는 Talairach 좌표를 적용하여 재구성된 MR 영상을 3차원으로 제공하며, 이를 이용하여 자극의 위치를 표시할 수 있는 기준을 제공한다. 또한 환자의 모션이나 자극 트랜스듀서의 위치를 Talairach 좌표 매핑 소프트웨어 제공하기위해 스테레오 카메라를 이용하여 정확한 좌표를 획득할 수 있는 알고리즘을 적용하였다. 이러한 시스템 개발을 통해 뇌질환 연구와 치료에 다양하게 활용될 수 있을 것으로 기대된다.

• Proceedings of the KOSOMBE Conference
• /
• v.1998 no.11
• /
• pp.295-296
• /
• 1998

With xeroradiography appearance, DR (Digital Radiography) system have been studying for X-ray detection using photoreceptor. Also detection method for receptor charge change have been developing variably. We use photoreceptor material of a-Se(Amorphous Selenium) with high DQE, high SNR(Signal to Noise Ratio) and high transformation efficiency of X-ray signals into electrical signals. After a-Se receptor is uniformly charged by using Arc discharge, X-ray is exposed. Then a-Se receptor produce subtle charge variation and MOSFET detect charge variations. The detected signal pass A/D converter and signal processing by PC. As results, the initial voltage is 8V. It has wide dynamic range needed digital radiography system. In this study, we obtained data with changing kVp(tube potential voltage) and fixed 8mAs(tube current by exposure time) in X-ray system. However MOSFET detector for X-ray signal is not tested X-ray mAs variations. But if MOSFET detector is tested X-ray mAs variation and exactly calibrated multichannel is made and noise-reduction is done, suitable DR system readout method will be done.

• Proceedings of the Microbiological Society of Korea Conference
• /
• 2005.05a
• /
• pp.192.4-192
• /
• 2005

• Korean Journal of Digital Imaging in Medicine
• /
• v.6 no.1
• /
• pp.24-30
• /
• 2003

Flat-panel detector(FPD) is the driving force for realizing the next gene ration of x-ray system. In this study, we developed amorphous selenium(a-Se) based flat-panel digital X-ray detector(DXD) for radiography. The prototype detector consists of an amorphous selenium layer and a thin-film transistor(TFT) array. Comparing to other papers1)-4), optimization of amorphous selenium and progress of evaporation were similar. The pixel pitch of fabricated detector was $139{\mu}m$, fill factor was 86%, and the size was 14"${\times}$8.5". Hand and test bar pattern images were acquired. A high modulation transfer function(MTF) factor was obtained: 58% at 3.0 lp/mm.

• Proceedings of the Korean Nuclear Society Conference
• /
• 1997.05a
• /
• pp.437-443
• /
• 1997

DYLAM and its related applications are reviewed in detail and found to have many favorable characteristics. Concerning human factor analysis, the study demonstrates that DYLAM methodology represents an appropriate tool to study man-machine behavior provided that DYLAM is used to model machine behavior and an appropriate operator interface human factor model is included. A hybrid model which is a synthesis of the DYLAM model, a system thermodynamic simulation model and a neural network predicative model, is implemented and used to analyze dynamically the CANDU pressurizer system.

• Journal of the Korean Society of Systems Engineering
• /
• v.8 no.1
• /
• pp.9-19
• /
• 2012

The Light Rail Transit Project is a large scaled project which takes several years in building a system. After construction, LRT system is operating for several tens of years. For these characteristics, the right application of systems engineering to LRT project greatly effects the project success. In this paper, we present systems engineering application model to LRT project i.e. SELRT which include systems engineering technical process, core technology management process, project support process. SELRT also has a module for the exchange of outputs in SE tool and PM tool. Systems engineering processes in SELRT mainly base on ISO/IEC 15288. In future, we expand the range of SE processes and improve the usability in SELRT. We expect that this model will contribute to improve the efficiency in LRT project and to success the LRT project.

• Journal of KIISE:Computing Practices and Letters
• /
• v.11 no.3
• /
• pp.246-256
• /
• 2005

Rule-based paradigm is one of the principal types of software process modeling and enaction approaches, as they provide formality and flexibility sufficient to handle complex processes. However, the systems adopting rule-based paradigms are hard to define and understand process models, and their inference engine should be modified or redeveloped at worst according to the change of process language. In this paper, we describe a rule-based PSEE(Process-Centered Software Engineering Environment) PRAiSE that solves the above limitations of existing rule-based PSEEs as well as maintains the merits of rule-based paradigm such as the ability to incorporate the nature of software processes flexibly in which dynamic changes and parallelism are pervasive and prevalent. PRAiSE provides RAiSE, a graphical Process modeling language, and defined process models are interpreted and enacted by process engine implemented using CLiPS, a rule based expert system tool.