• The KSFM Journal of Fluid Machinery
• /
• v.19 no.6
• /
• pp.26-33
• /
• 2016

Combined heat and power (CHP) system is one of the power generation system which can generate both electricity and heat. Generally, mid-size and big-size CHP plant in Korea generate electricity from gas turbine and steam turbine, then supply heat from exhaust gas. Actually, CHP can supply heat using district heater which is located at low pressure turbine exit or inlet. When the district heater locates after low pressure turbine, which called back pressure type turbine, there need neither condenser nor mode change operating control logic. When the district heater locates in front of low pressure turbine or uses low pressure turbine extraction steam flow, which calls condensing type turbine, which kind of turbine requires condenser. In this case, mode change operation methods are used for generating maximum electricity or maximum heat according to demanding the seasonal electricity and heat.

• Proceedings of the Korea Contents Association Conference
• /
• 2009.05a
• /
• pp.99-104
• /
• 2009

The SMS(Short Message Service) in Mobile phone is a service that a text message by 80byte is transmitted and received. Recently it's used instead of voice calls. In this paper, We investigate how you take advantage of the SMS for searching information without simply as a means of voice call, and how much efficiency does the SMS have in Location Information Retrieval Services on LBS(Location-based service). Based on the previous topics, we design the information retrieval system using SMS for solveing the rates issue by existing wireless Internet access, and propose the possibility as new forms of content services.

• Water Engineering Research
• /
• v.3 no.4
• /
• pp.259-267
• /
• 2002

South Africa has developed a policy and law that calls and provides for the equitable and sustainable use of water resources. Sustainable resource use is dependent on effective resource protection. Rivers are the most important freshwater resources in the country, and there is a focus on developing and applying methods to quantify what rivers need in terms of flow and water quality. These quantified and descriptive objectives are then related to specified levels of ecological health in a classification system. This paper provides an overview of an integrated and systematic methodology, where, fer each river, and each river reach, the natural condition and the present ecological condition are described, and a level/class of ecosystem health is selected. The class will define long term management goals. This procedure requires each ecosystem component to be quantified, starting with the abiotic template. A modified flow regime is modelled for each ecosystem health class, and the resultant fluvial geomorphology and hydraulic habitats are described. Then the water chemistry is described, and the water quality changes that are likely to occur as a consequence of altered flows are predicted. Finally, the responses to the stress imposed on the biota (fish, invertebrates and vegetation) by modified flow and water quality are predicted. All of the predicted responses are translated into descriptive and/or quantitative management objectives. The paper concludes with the recognition of active method development, and the enormous challenge of applying the methods, implementing the law, and achieving river protection and sustainable resource-use.

• The Bulletin of The Korean Astronomical Society
• /
• v.41 no.2
• /
• pp.38.1-38.1
• /
• 2016

TRAO has been newly equipped with a multi-beam receiver system, 16 pixel MMIC preamplifiers in a $4{\times}4$ array, a FFT spectrometer, and new control computer systems. In our new receiver systems one can make simultaneous observations with two molecular lines maximum 15 GHz apart with a spectral band width of 60 MHz. Typical system temperatures are about 160 - 200 K at 86 ~ 100 KHz and 400 - 500 K at 115 GHz in the dry weather. The new systems using On-The-Fly mode were found to be very efficient in making quick and sensitive maps of large clouds with a high velocity resolution (~0.04 km/s at 100 GHz). TRAO now calls for proposals for 2016 and 2017 observing season for everybody. In the talk we will introduce the current status of TRAO upgrade and its scientific preliminary results.

• Proceedings of the Korean Institute of Navigation and Port Research Conference
• /
• 1998.10a
• /
• pp.241-253
• /
• 1998

By the rapid expansion of containerization and intermodel transportation in international shipping since the 1970's, the larger containerships have emerged and concentrated their calls at a limitted number of ports. Moreover, large-scale container terminals have been built to accommodate the ever-larger containerships, and the mordernization of terminal facilities and many developments in information technology etc. have been brought out. Thus, unlimited competition has been imposed on every terminal with neighbouring ports in Japan, Singapore, Hongkong and Taiwan etc. The purpose of this study is invested to suggest how the container terminal operators cope with unlimited competition between local or foreign terminals. The results are suggested as follows : First, transshipment cargoes, which the added value is high, is to be induced. Second, the function of storage is given on On-Dock Yard. Third. Berth Pool Operation System is introduced, especially in Gamman Container Terminal and Kwangyang Container Terminal. Fourth, the cargo handling charges is decided by terminal operator.

• Journal of Korea Society of Digital Industry and Information Management
• /
• v.11 no.1
• /
• pp.19-25
• /
• 2015

In this time, as an industrial society developed to a welfare society, more and more people want their quality of lives upgraded and specially customized service by mass production/mass consumption. And it leads to an increase of requiring service. There're active developments and studies on various IT equipment as the requirement made IT devices used in service. In this paper, we try to design and realize radio paging DID by using smart device to be used as a receiver of a radio pager which is broadly used at face to face service. Firstly, we used MCU to design and implement Wireless Calling Gateway which change radio calling signal of ISM band to smart device. A receiver of wireless caller used original receiver module. Also it used bluetooth module to communicate with smart device. It was possible to have satisfactory communication since radio paging signal converter and smart device were linked in 3M. Secondly, to indicate various paging information delivered from a radio pager, we realized DID application program by using Smart PAD. As a result, we could indicate various information compared to an original receiver which only could indicate letters or numeric data. Secondly, we implemented the DID app for wireless calls that can display a variety of information sent from a wireless pager. Was implemented using the Smart Pad. As a result, it is shown that can display a variety of information than the existing receiver.

• Journal of architectural history
• /
• v.8 no.3 s.20
• /
• pp.75-89
• /
• 1999

Under the WTO system, global standardization of professionalism in architecture practice calls for transformation of curriculum in architectural education in Korea. This paper compares the curriculum standards of international accrediting authorities such as NAAB and RIBA based on UIA accord which defines fundamental knowledge and abilities of an architect. As a result this paper extracts 51 achievement oriented criteria of architectural education in Korea. It can be categorized as communication, design, cultural context(history and theory, human behavior and social aspects), technical systems(structural systems, environmental control systems, construction material and assemblies) and practice(project process, project economics and business management, laws and regulations). Based on this recommended Korean curriculum standards, current curriculum is analyzed focusing on the 5 architectural programs in Seoul. Through this analysis, it became clear that some area - social and economic aspects in architecture, sustainability in architecture, understanding and selection of construction material, assemblies and environmental control system, recycling of existing building, professional liability, professional rules of conduct, project economics and project management - need to be covered and emphasized to meet the international standards in professional education in architecture. The result in this paper will be used as a basic data in the process of finding the direction of restructuring curriculum for professional architectural education in Korea.

• Fire Science and Engineering
• /
• v.30 no.4
• /
• pp.135-140
• /
• 2016

To help emergency medical dispatchers receive rapid and accurate identification and corrective action status determination of an emergency call, and to support the automatic processing of a voice recognition system to the Korean emergency medical dispatch system, emergency call records were analyzed. Furthermore, a list of Korean symptoms expression were produced and the characteristics of the symptoms that appear on the actual wording of the telephone records were identified. This language list and its characteristics will be useful for training emergency medical dispatchers.

• Science of Emotion and Sensibility
• /
• v.5 no.2
• /
• pp.63-72
• /
• 2002

In order to examine universal design, 1 have developed two analytical methodologies based on 3P(point) task analysis: structured task analysis and task matrix analysis. I also extracted nine universal design items, namely (1) adjustment, (2) redundancy, (3) specification and function transparency, (4) feedback and (5) error tolerance, (6) effective acquisition of information, (7) ease of understanding and judgment, (8) comfortable operation, and (9) continuity of information and operation. Structured task analysis is used to uncover problems in each of the tasks constituting a job for each functionally challenged condition of users, and solutions to the extracted problems are examined in terms of the above-mentioned nine universal design items. Task matrix analysis calls for the production of a table for each task in a job. In each table, nine items form the columns, and the horizontal rows list all disability types. Then, solutions are formulated for each cell formed by the intersecting columns and rows. Using these two analysis methods, 1 have conducted a verification experiment for the universal design of a public bus. The results of the research have enabled me to propose various ,solutions from a system-based perspective, instead of coming up with the superficial and isolated solutions which are normally produced when conventional analytical methods are used.

• Proceedings of the Korean Society for Emotion and Sensibility Conference
• /
• 2002.05a
• /
• pp.144-151
• /
• 2002

In order to examine universal desist I have developed two analytical methodologies based on 3P(point) task analysis: structured task analysis and task matrix analysis. I also extracted me universal design items, namely (1) adjustment (2) redundancy, (3) specification and function transparency, (4) feedback and (5) error tolerance, (6) effective acquisition of information, (7) ease of understanding and judgment (8) comfortable operation, and (9) continuity of information and operation. Structured task analysis is used to uncover problems in each of the tasks constituting a job for each functionally challenged condition of users, and solutions to the extracted problems are examined in terms of the above-mentioned nine universal design items. Task matrix analysis calls for the production of a table for each task in a job. In each table, nine items from the columns, and the horizontal rows list all disability types. Then, solutions are formulated for each cell formed by the intersecting columns and rows. Using these two analysis methods, T have conducted a verification experiment for the universal design of a public bus. The results of the research have enabled me to propose various solutions from a system-based perspective, instead of coming up with the superficial and isolated solutions which are normally produced when conventional analytical methods are used.