• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 1999년도 제14차 학술회의논문집
• /
• pp.37-40
• /
• 1999

ETRI has successfully completed and delivered to KARI the KOMPSAT Mission Control System. This system was designed to work in the conventional TT&C modulation scheme with the pre-assigned frequencies. As a way to accelerate in catching up with future TT&C technology evolutions, a preliminary study needs to be carried out to prepare for the development of a spread spectrum applicable to TT&C. A brief study was carried out to review some points to be considered in designing and implementing spread spectrum schemes to the ground TT&C system intended for a LEO spacecraft. Also a simulation and link design revisit was performed to see the operational and technical benefits with the KOMPSAT TT&C parameters. An experiment concept is proposed to test as many functions at a time once the prototype is developed. In this configuration, a ground-model TT&C transponder is connected via LAN to the ETRI-developed KOMPSAT S/W simulator and linked to the KOMPSAT TM/TC processing s/w via spread spectrum signals through a GEO satellite bent-pipe link. A satellite data relay link simulation could be carried out in this configuration.

• 한국안전학회지
• /
• 제26권1호
• /
• pp.8-14
• /
• 2011

Noise and vibration are likely to disturb the sensory system of human body leading to psychological stress and thereby property damage. In this research, a cut out switch(COS) with a built-in acoustic absorber along with a COS fuse broken was developed to reduce percussion noise. This new system is based on a design approach that combines existing absorber systems: expansion type, resonator type, and acoustic absorber type silencer The noise performance of the new system was simulated using the $SYSNOISE^{TM}$ software under optimized parameters: the diameter of perforated plate 2 mm, the plate thickness 3 mm, the width of expansion room 25 mm, the impinging vortex room 14 mm, and the noise absorbtion room 10 mm. The results showed that it reduced noise by approximately 41.1 dB compared to the current systems available in the market. Furthermore, it showed reduced noise by approximately 12 dB more than a product with an acoustic absorber of the Fault Tamer(USA).

• Journal of Microbiology and Biotechnology
• /
• 제14권4호
• /
• pp.673-679
• /
• 2004

A microbial cryoprotectant formulation using a W/O/W multiple emulsion system was developed. The psychrotolerant microorganism, B4, isolated from soil in South Korea, was observed by the drop freezing method, in which the microorganism sample inhibited ice nucleation activity. The antifreeze activity was eliminated when the microorganism sample was treated with protease, indicating that the antifreeze activity was due to the presence of antifreeze protein. The result of the l6S rDNA sequencing indicated the B4 strain was most closely related to a species of the genus Bacillus. Culture broth of B4 strain (Bacillus sp.) and rapeseed oil containing 1 % polyglycerine polyricinolate (PGPR) were used as core and wall material, respectively. The most stable W/O emulsion was prepared at a core/oil ratio of 1:2. The highest W/O/W emulsion stability was achieved when the primary emulsion to external aqueous phase containing 0.5% caster oil polyoxyethylene ether $(COG25^{TM})$ ratio was 1:1. Microcrystalline cellulose showed better W/O/W emulsion stability than other polymer types. The viability of cells in a W/O/W emulsion was higher than free cells during storage at $37^\circ{C}$. An acidic pH and UV exposure decreased the viability of free cells, but cells in W/O/W emulsion were more stable under these conditions.

• 소성∙가공
• /
• 제14권3호
• /
• pp.263-268
• /
• 2005

Heating channel layout design and evaluation technology for SMC molding system was investigated in this work. Traditional rules of cooling channel design in injection molding were applied to the present work. Finite element thermal analysis with $ANSYS^{TM}$ was performed to evaluate the temperature distribution of SHC mold surface. SMC mold was manufactured to evaluate the effect of a proposed heating channel layout system on the temperature distribution of SMC mold surface and infrared camera was applied to a measurement of temperature distribution. It was shown that infrared camera application was possible in a measurement of temperature distribution on SHC mold surface.

• 대한치과보철학회지
• /
• 제42권5호
• /
• pp.544-555
• /
• 2004

Statement of problem: Shade selection has traditionally been accomplished by visual examination, which is particularly relevant to the shade selection of anterior teeth, but the subjective nature of visual analysis can lead to errors in shade matching. Recently shade selection systems have been developed to provide a more objective and scientific approach to understanding and clarifying shade selection. Purpose : The purpose of this study was analysis of various shade analyzing equipment with the goal of providing a more objective shade selection. Materials and method: Visual shade matching system selection(Vita Lumin Vacuum shade guide, Vitapan 3D Master shade guide) and mechanical shade matching method($ShadeEye^{(R)}$-EX Chroma Meter, $Shadescan^{TM}$ System) used for this study. The shade guide tap specimens for 10 extracted maxillary anterior teeth were produced by selecting shades using each shade matching system. The accuracy of the selection of shades for the teeth and fabricated specimens were evaluated by analyzing the calculated shade difference(${\Delta}E^*$), using a spectrophotometer and calculating the output of value $L^*,\;a^*,\;b^*$. Results and conclusion: The results show that the average ${\{Delta}E^*$ value (difference of shade) of the shade tap specimens to the actual specimen decreased in the following order: Vita Lumin Vacuum Shade Guide(VL), $ShadeEye^{(R)}$-EX Chroma Meter(SE) Vitapan 3D Master Shade guide(V3), and $Shadescan^{TM}$ System(55) : and that there are significant statistical differences between the VL and SS (p<0.05). In the analysis of the ${\Delta}E^*$ (difference of shade) value,40% of the VL group was found to be less than 3.3 (limit value of shade tap specimens clinically acceptable), 60% in the V3 group, 50% in the SE group, and 80% in the SS group.

• 설비공학논문집
• /
• 제20권4호
• /
• pp.238-244
• /
• 2008

This study investigates on the improvement of inhalation effect of hood which attached new device named as "gas-guide-device" in local exhaust ventilation system for the effective elimination of harmful material and dust in manufacturing factory. The gas-guide-device having a diamond shape is composed of width (b) and two sides of a device (X, Y) and its size is selected the industrial hood under application in manufacturing factory after due consideration. In order to investigate the effect of gas-guide-device, numerical and experimental study is performed that the flow velocity is calculated and is measured by a commercial program "COMSOL $Multiphysics^{TM}$" and a hot wire type of anemometer, respectively. The numerical and experimental results are revealed is a similar pattern and flow velocity has improved to hood attached gas-guide-device. Also, the numerical method and result is also verified the dependance. Moreover, the optimum shape and size of gas-guide-device is revealed that the width (b) and the ratio of two sides of gas-guide-device (X, Y) has 125mm and 4 to 6.

• 한국정보통신학회논문지
• /
• 제3권3호
• /
• pp.681-686
• /
• 1999

본 논문에서는 편광 비의존 특성을 가지는 반도체 광 증폭기 개발을 위해 지금까지와는 다른 새로운 방법인 160($\AA$) 두께를 가지는 GaInAs 양자 우물에 GaAs Delta 층을 각각 1층, 2층, 3층을 삽입한 구조와 GaAs Delta 3층의 구조에서 Delta 층의 두께를 1 원자층에서 3 원자층까지 변화시켜 계산한 결과, 1 원자층 두께를 가지는 GaAs Delta 층이 3층 포함된 구조에서 3dB 이득 대역폭이 TE, TM 모두 85nm로 매우 넓은 대역폭과 편광 비의존 특성을 함께 가지는 구조를 얻어낼 수 있었다. 이러한 GaInAs 양자 우물에 GaAs Delta 층을 삽입한 구조의 이론적 이득 특성의 결과는 반도체 광 증폭기의 설계에 있어서 아주 중요하며, 또한 광대역 과장 분할 다중화 시스템에 적용될 수 있는 반도체 광 증폭기에 알맞은 구조로 사용될 수 있다.

• 구강회복응용과학지
• /
• 제23권2호
• /
• pp.157-170
• /
• 2007

Purpose: This investigation was designed to determine the translucency and color stability of various core ceramics for all-ceramic restoration using the CIE $L^*a^*b^*$ system. Material and Methods: IPS e.max Press ceramic(Ivoclar-Vivadent, Liechtenstein), $LAVA^{TM}$ All Ceramic(3M-Espe, Germany), Cercon Smart Ceramic(Dentsply, Germany), and Z-match Ceramic(DentAim, Korea) were used for this study. For the specimens of zirconia oxide ceramics, the as-sintered cylindrical blanks($11.0{\times}25.0mm$) were machined into the shape of a disk(0.4, 0.8, 1.5 mm in thickness, 10 mm in diameters) with a diamond grind machine. The IPS e.max Press specimens ($0.8{\times}10mm$) were fabricated using the "lost wax" technique. CIE $L^*a^*b^*$ coordinates and light transmission were recorded for each specimen with a spectrophotometer(CM-2600d, Minolta, Japan). Color differences were calculated using the equation, ${\Delta}E^*ab=[({\Delta}L^*)2+({\Delta}a^*)2+({\Delta}b^*)2]1/2$. Results: The results were obtained as follows: 1. The most translucent group was IPS e.max Press ceramic that is a glass-ceramic, and $Lava^{TM}$ and Z-match ceramic were more translucent than Cercon Smart ceramic in zirconia ceramic group. 2. In the all groups, there was no significant translucent change after 6 times heat-treatments required to make a final restoration. 3. Colored zirconia was showed more yellowish and dark than uncolored zirconia. 4. After heat-pressing, IPS e.max Press ceramic was showed high ${\Delta}E^*ab$ value(4.1 of eM1, 6.8 of eM2) that means to be more whiter than before heat-pressing. However, there was no color change after additive heat treatments for final restoration. 5. In the colored zirconia groups, there was no significant color change after some heat-treatments required to make a final restoration.

• Smart Structures and Systems
• /
• 제8권4호
• /
• pp.367-384
• /
• 2011

This paper presents the design and experimental evaluation of fast output sampling feedback controller to minimize structural vibration of a cantilever beam using Shape Memory Alloy (SMA) wires as control actuators and piezoceramics as sensor and disturbance actuator. Linear dynamic models of the smart cantilever beam are obtained using online recursive least square parameter estimation. A digital control system that consists of $Simulink^{TM}$ modeling software and dSPACE DS1104 controller board is used for identification and control. The effectiveness of the controller is shown through simulation and experimentation by exciting the structure at resonance.

• 대한전자공학회:학술대회논문집
• /
• 대한전자공학회 2000년도 하계종합학술대회 논문집(1)
• /
• pp.244-247
• /
• 2000

This paper deals with methods for partial response maximum-likelihood (PRML) detection and crosstalk cancellation. In accrodance with the demand for increased recording density, 20 gigabyte (Gbyte) digital versatile disk (DVD) ROM channel is considered. Channel is modelled to be close to real optical channel using DIFFRACT$\^$TM/. After comparing the spectral characteristics of various PR polynomials, P(D)=1＋D＋D$^2$＋D$^3$is proposed as a target PR. The performance of the system is illustrated under the condition that the readout signal is degraded by crosstalk, radial tilt and nonlinear distortions in optics. The experimental results show that crosstalk and nonlinear distortions degrade performance by about 2dB, respectively. We also show that when radial tilt is added to the crosstalk, the performance degradation assumes quite significant proprotions.