• Journal of Preventive Medicine and Public Health
• /
• v.7 no.2
• /
• pp.373-375
• /
• 1974

The concentration of Carton momoxide(CO) and Sulful dioxide($SO_2$) by burning time of coal, and its time of fading out in atmosphere after effluence from stove were measured with Kitagawa gas detector, January, 1974. Gas for measurement was sampled by gas syringe at the point distanced 60cm. from first junction of garvanized pipe of stove. CO concentration was directly proportional to the burning temperature of coal but $SO_2$ was generally constant durning burning time or also in proportion to burning temperature. CO gas of effluent mixed with air(relative humidity, 40%) was maintained for long period relatively, but $SO_2$ gas was early faded out within short time. The period decreasing to allowable limit was about 4 days in former and about 30 minutes in later, respectiively.

• Journal of the Korean Society of Manufacturing Process Engineers
• /
• v.13 no.2
• /
• pp.41-48
• /
• 2014

Direct writing(DW) is a method of patterning materials to a substrate directly, without a mask. It can use a variety of materials and be applied to various fields. Among DW systems, the flow-based type, using a syringe pump and nozzle, is simpler than other types. Furthermore, the range of materials is exceptionally wide. In additive processes, a three dimensional structure is made of stacking layer. Each layer is made of several lines. In this regard, good surface roughness of fabricated layers is essential to three dimensional fabrication. The surface roughness of any fabricated layer tends to change with the dispensing pattern. When multiple layers fabricated by a nozzle dispensing system are stacked, control of the nozzle position from the substrate is important in order to avoid interference between the nozzle and the fabricated layer. In this study, a fluid direct writing system for three dimensional structure fabrication was developed. Experimentsto control the position of the nozzle from substrate were conducted in order to examine the characteristics of the material used in this system.

• Journal of the Korean Society of Visualization
• /
• v.14 no.2
• /
• pp.40-45
• /
• 2016

Magnetic resonance velocimeter (MRV) is a powerful tool to non-invasively measure the velocity of a fluid flow in various fields ranging from medicine to engineering. However, since the demands for accurate measurement in the solid/liquid interface for cardiovascular diseases and porous media increase, the improvement of spatial resolution is required. In this study, a solenoid RF coil is developed for high spatial resolution measurement. The signal-to-noise ratio in solenoid RF coil is increased seventeen times better than that in commercial coil. Moreover, the velocity distribution of Hagen-Poiseuille flow is measured with in-plane resolution of $36{\mu}m$ by $36{\mu}m$ and the accuracy of the measured velocity is compared with theoretical distribution of the laminar flow. Flow rate calculated by MRV is estimated with the flow rate injected by syringe pump.

• Korean Journal of Veterinary Research
• /
• v.44 no.1
• /
• pp.137-141
• /
• 2004

The purpose of this study was to compare easiness of application of polypropylene external total ring prosthesis (PPTRP, Group A) with that of polyvinylchloride external total ring prosthesis (PVCTRP, Group B), which were used for surgical correction of tracheal collapse in dogs. PPTRP was made from 3 ml syringe and PVCTRP from the drip chamber of intravenous administration set. Prostheses of group A (n=5) and B (n=5) were placed to cervical trachea in clinically normal 10 dogs, respectively weighing between 4 kg and 6 kg. There were mild coughing and swelling in one to three dogs of both groups for 3 days after surgery. No exercise intolerance was observed in both groups after surgery. There were no different results of clinical signs and radiographic views after surgery between group A and group B. The time (mean${\pm}$SD) to make total ring prosthesis, group A took $23.2{\pm}1.9$ minutes which was remarkably longer than that $(4.6{\pm}0.3)$ of group B. Also, the time to place around trachea, group A required $61.8{\pm}8.8$ minutes and group B $38.4{\pm}8.0$ minutes. Conclusionly, PVCTRP was timesaving and easier to make, fix, and suture than those of PPTRP. PVCTRP may be used alternatively to PPTRP for the tracheal collapse to treat in dogs.

• International Journal of Oral Biology
• /
• v.41 no.1
• /
• pp.33-38
• /
• 2016

One of functions of Galla Rhois (GR) is reportedly an anti-inflammatory effect on the several inflammatory diseases. However, an effect of GR related to periodontitis has not been investigated. In the present study, we examined the effect of the hexane extract of Galla Rhois (GR-H) on periodontitis. Cytotoxicity was assessed by MTS analysis using human gingival fibroblast (hGF) cells. Experimental periodontitis was induced by injecting E.coli LPS into the palatal gingiva maxillary molar thrice weekly for 3 weeks (LPS group). GR-H diluted in 1xPBS was orally administrated using a syringe at 30 mg/kg body weight and 100 mg/kg body weight once a day (GR-H group). GR-H effect on the alveolar bone loss (ABL) was digitized with a micro-CT. GR-H treatment at concentrations exceeding 0.5 mg/ml showed cytotoxic effect in hGF cells. The micro-CT among groups were presented for the different distances from cemento-enamel junction (CEJ) to alveolar bone crest (ABC). The results indicated an inhibitory effect on alveolar bone loss for orally administered GR-H in a model of LPS-induced periodontitis.

• Proceedings of the Korean Society of Marine Engineers Conference
• /
• 2005.06a
• /
• pp.521-527
• /
• 2005

The effects of an urae injection at the exhaust pipe for a 4-cylinder DI(Direct Injection) diesel engine are investigated experimentally. The urea quantity was controlled by NOx quantity and MAF(Manifold Air Flow). The urea injection must be precisely metered and then I used the urea syringe pump. I have tested 4 kinds of items that were with the EGR base engine and without the EGR engine. Then I tested each urea-SCR(Selective Catalytic Reduction) system. As the results, I can caculate the SUF(Stoichiometric Urea Flow) and visualize the NOx results by variation of engine speed and engine load. Also, I can make the NOx map. Therfore, I knew that NOx reduction effects of the urea-SCR system without the EGR engine were better than the with EGR base engine except of low load and low speed.

• The Korean Journal of Pain
• /
• v.9 no.1
• /
• pp.260-263
• /
• 1996

High spinal block is a rare complication during epidural block, but it may result in serious events. 56-year-old man with gall stones was scheduled for cholecystectomy under general anesthesia. After operation, lumbar epidural catheterization was done at $T_{8-9}$ interspace for postoperative pain control. At the recovery room, initial bolus drug (0.1% bupivacaine 10 ml containing fentanyl $100{\mu}g$) was administered via epidural catheter and observed carefully. 15 minutes later, hypotension and bradycardia ouccurred. Hartman' solution was administered rapidly and ephedrine 5 mg was injected. 30 minutes after drug administration, loss of consciousness and respiratory arrest developed. Tracheal intubation was done immediately. Cardiovascular and respiratory functions were monitored continuously. The location of intrathecal catheter was confirmed by cerebrospinal fluid (CSF) seen in syringe after aspiration of catheter. The patient recovered gradually and was placed in the ward 4 hours after drug administration, without any problems. He was discharged 1 week later in good health.

• The Korean Journal of Pain
• /
• v.7 no.2
• /
• pp.199-204
• /
• 1994

The purpose of this study is to evaluate the feasibility, advantages/disadvantages of patient-controlled sedation (PCS) compared to anesthesiologist-controlled sedation (ACS) during neurolytic pain block and regional anesthesia. Forty patients were divided randomly into two groups of 20 patients each. Group 1(ACS) received 0.01 $mg{\cdot}kg^{-1}$ intravenous midazolam and 0.5 ${\mu}g{\cdot}kg^{-1}$ fentanyl intravenously by anesthesiologist just before, 30, and 60 minutes after the procedure to acheive sedation; Group 2 (PCS) patients self-administered a mixture of midazolam (0.4 mg) and fentanyl ($20{\mu}g$) using a syringe type infusion pump (Terumo, Japan) to acheive sedation. Considering the dermographics of patients, the types and durations of procedure performed, the level of average sedation the comfort level were similar in both groups. But the doses of midazolam and fentanyl administerd in group 2 were smaller than those in group 1 (p<0.01). Patients in PCS group showed their level of sedation more proper than did those in ACS group. However, patients in ACS group rated their level of comfort higher than did those in PCS group. The findings of this study indicate that PCS using a combination of midazolam and fentanyl is a fafe and effective technique. More studies are, however, needed to determinc the best choice of drug(s), doses, lock-out intervals, and possible use of continuous infusion with patient-controlled sedation.

• Journal of Biomedical Engineering Research
• /
• v.26 no.4
• /
• pp.193-197
• /
• 2005

Shunt valves used to treat patients with hydrocephalus were tested to investigate influence of intracranial pressure pulsation on their flow control characteristics. Five commercial shunt valves were tested in the flow loop that simulates pulsed flow under pressure pulsation. As 20cc/hr of flow rate was adjusted at a constant pressure, application of $40mmH_2O$ of pressure pulse increased the flow rate by $67.9\%.$ As a 90cm length catheter was connected to the valve outlet, increase in the flow rate was substantially reduced to $17.5\%.$ As the flow rate was adjusted to 40cc/hr at a constant pressure, increase in the flow rate was $51.1\%$ with the same pressure pulsation of $40mmH_2O$. The results indicated that pressure-flow control characteristics of shunt valves implanted above human brain ventricle is quite different from those obtained by syringe pump test at constant pressures right after manufacture. The influence of pressure pulsation was observed to be more significant at low flow rate and the flexibility of the outlet silicone catheter was estimated to significantly reduce flow increase due to pressure pulsation.

• Journal of Korean society of Dental Hygiene
• /
• v.17 no.3
• /
• pp.381-394
• /
• 2017

Objectives: This study aims to evaluate carbonated drinks induced dental caries with qualitative analysis and to compare with oral organic acids including lactate, acetate, propionate, formate, butyrate, pyruvate and valerate which cause caries when taking either 10% sucrose drinks or carbonated drinks. Methods: Saliva was collected from six study subjects before and after (start, 5, 10, 30 minutes) taking water intake upon (A) 10% sucrose intake, (B) 10% sucrose intake, and (C) carbonated drink intake, then they were centrifuged at 1,200 rpm followed by removing bacteria and enzymes with syringe filtering, performing a qualitative analysis with HPLC conductivity detection (GP50 gradient pump, ED 50 detector) after saliva pre-treatment under isocratic 100 mM NaOH mobile phase. Results: Higher risk of dental caries was evaluated in order of C>B>A, with the results of total oral organic acids' concentration, lactates of organic acids and organic acids produced after 5 minutes from the 3 types of drinks intake. Conclusions: Carbonated beverages were estimated to develop higher dental caries induction than beverages containing 10% sucrose because of the high organic acid concentration in the mouth after its intake.