• 한국자동차공학회논문집
• /
• 제13권5호
• /
• pp.57-63
• /
• 2005

The effects of an urea injection at the exhaust pipe for a 4-cylinder DI(Direct Injection) diesel engine were investigated with the parameters such as urea-SCR(Selective Catalytic Reduction) and EGR system. The urea quantity was controlled by NOx quantity and MAF(Manifold Air Flow). The urea injection quantity can be controlled with the urea syringe pump, precisely. The effects of NOx reduction for the urea-SCR system were investigated with and without ECR engine, respectively. It was concluded that the SUF(Stoichiometric Urea Flow) is calculated and the NOx results are visualized with engine speed and load. Furthermore, the NOx map is made from this experimental results. It was suggested, therefore, that NOx reduction effects of the urea-SCR system without the EGR engine were better than that with the EGR engine except of low load and low speed.

• 한방안이비인후피부과학회지
• /
• 제17권3호
• /
• pp.107-113
• /
• 2004

Objective: This study was performed to evaluate the effects of venesection on palpebral conjunctiva, on the stoke patients complaint of defective vision. Methods: We studied four selected stroke patients with defective vision which start with stroke. Venesection was performed with syringe needleonce or several times on upper or lower palpebral conjunctiva. After every venesection we washed the eye(s) with normal saline. We evaluated the effects by VAS. Results & conclusion: Venesection on palpebral conjunctiva was efficacious against defective vision occured on the stoke patients. But more clinical & scienific trials are expected to follow this study.

• 대한치과마취과학회지
• /
• 제13권3호
• /
• pp.81-87
• /
• 2013

This article discusses the issues of benefit and possibility of application of patient-controlled sedation (PCS) for the dental treatment. The purpose of administering PCS for patients is to diminish anxiety and to provide cooperative and effective dental treatment. But there are a lot of barriers to application of PCS such as knowledge about pharmacokinetics of sedatives, expensive high speed and patient-controllable syringe pump, and well educated sedationist. And there could be risk of deep sedation, airway obstruction and hypoxic brain damages, etc. In order to decrease incidence of complication, appropriate drug selection, selection of right bolus dose, lock-out time is much important.

• 대한전자공학회:학술대회논문집
• /
• 대한전자공학회 2001년도 하계종합학술대회 논문집(5)
• /
• pp.195-198
• /
• 2001

We developed the portable blood analysis system, which can be measured pH of the blood. This system is composed to electronic circuit, mechanism, and system software. Electronic circuit is composed to the sensor, pre-amp part, temperature regulation part, fluid sensing part, A/D(analog to digital) conversion part, main and peripheral device processing part. And the mechanism is composed to the flow cell and the liquid flow part. The liquid flow part is consisted of blood and washing control system under the control of the 6-channel solenoid valve and syringe rump. The system software is composed to measurement program, calibration program, washing and diagnostic program. The program of each routine is designed as sequential process for an efficiency. And the portable pH analysis system used two-point calibration method using the two types of corrective liquid. As a result, we obtained the calibration curve and calculated the value of pH. For verifying the system, we confirmed the output voltage of the sensor, and estimated reappearance of system using the standard liquid.

• Journal of Plant Biology
• /
• 제37권1호
• /
• pp.27-36
• /
• 1994

For establishing a transformation system of rice, an efficient introduction of foreign genes into embryogenic cell suspension by particle bombardment was conducted. The particle inflow gun based on the acceleration of DNA-coated tungsten particles using pressurized helium was constructed for delivery of DNA into rice cells. Several bombardment parameters were optimized using the transient expression of GUS gene. The conditions that gave the highest GUS gene expression of about 1000 blue spots per g fresh weight of bombarded cells include treatment of the cells with 0.5 M osmotic pressure, and use of the 410 kPa helium, 110 mm target distance, 13 mm syringe filter holder and 5 $\mu$L DNA/tungsten mixtures. It was also confirmed that rice actin promoter-intron construct gave the highest expression of all promoter-sequences studied. Eight weeks after the bombardment, stably transformed calluses were obtained on the selection medium containing 100 mg/L G418 and showed the strong activity in in situ GUS assay.

• 한국산학기술학회:학술대회논문집
• /
• 한국산학기술학회 2000년도 추계학술대회
• /
• pp.245-250
• /
• 2000

고습도 또는 결로시 내수성을 지니는 저항형 습도센서를 제조하기 위하여 vinylbenzyl tributyl phosphonium chloride를 포함하는 4원 공중합체를 합성하여 저습도와 고습도 범위에서 측정이 가능한 습도센서용 감습막을 제작하였다. 1,5-dibrompentane과 4차 염화 가교 반응을 통하여 최종 저항형 습도센서를 제작하였다. 감습막은 알루미나 기판에 한 쌍의 금 paste가 인쇄된 전극을 사용하였으며, 감습막은 다양한 비율의 vinylbenzyl tributyl phosphonium chloride, 2-(dimethlamino)ethyl methacrylate, 2-ethylhexyl acrylate, 그리고 [2-(methacryloyloxy)ethyl]trimethyl ammonium chloride 등을 이용하여 제조하였다. 감습막은 micro-syringe를 이용하여 도포하였으며 건조 oven에서 50℃에서 6시간 동안 가교반응을 진행하였다. 습도센서의 임피던스 특성은 2-(dimethylamino)ethyl methacrylate 또는 [2-(methacryloyloxy)ethyl]trimethyl ammonium chloride의 함량이 증가할수록 감소하였다. vinylbenzyl tributyl phosphonium chloride / 2-(dimethylamino)ethyl methacrylate / 2-ethylhexyl acrylate / [2-(methacryloyloxy)ethyl]trimethyl ammonium chloride의 조성비가 4/4/1/1인 공중합체의 경우 30-90%RH 범위에서 2.64 ㏁ - 3.11 ㏀의 임피던스 특성을 보였으며 우수한 직선성과 낮은 히스테리시스 나타내었다.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2003년도 하계학술대회 논문집 C
• /
• pp.1941-1943
• /
• 2003

본 논문은 광 검출을 이용한 전기화학발광 (Electrochemiluminescence : ECL)을 마이크로시스템에 적용하여 소형화하였으며, 기존 광 검출 시스템과 결과를 비교하여 그 특성을 분석하였다. ECL은 전기에너지를 촉매로 사용하기 때문에 화학발광 보다 마이크로채널 내에서 발생하는 층류문제를 해결할 수 있는 적합한 방법이다. 유리기판에 Au를 박막으로 증착하여 전극으로 사용하였으며, SU-8 구조물을 이용한 PDMS mold를 사용하여 마이크로채널을 제작하였다. 전극과 PDMS는 $O_2$ 플라즈마를 이용하여 접합하였다. luminol과 과산화수소는 Syringe pump로 구동하였으며, 발생된 빛은 반도체 공정기술로 제작한 P-N접합 포토다이오드를 이용하여 전류신호로 측정하였다. 새로 구성된 시스템을 이용하여 마이크로채널 내에서의 luminol과 과산화수소의 유속, 농도변화에 따른 광전류 변화를 측정하여 기존시스템과 비교하였다.

• 한국연소학회:학술대회논문집
• /
• 한국연소학회 2013년도 제46회 KOSCO SYMPOSIUM 초록집
• /
• pp.55-58
• /
• 2013

A new soot particle generation system has been developed and tested. The soot generation system consists of two sections, a fuel supply and a soot production. In the fuel supply module, either liquid fuel precisely controlled by a syringe pump is mixed with preheated carrier gas and rapidly evaporated or gaseous fuel controlled by a MFC is diluted with dilution gas. The soot production module contains a heater that can raise the gas/fuel temperature up to $1400^{\circ}C$. The physical and chemical properties of produced soot particles depend on the type and concentration of fuel, the residence time, and temperature in the soot production section. The soot generation system will be utilized to produce well-defined soot particles for soot studies such as the evaluation of experimental sampling and analysis processes for the quantitative assessment of PM and BC from ships and the adverse health effects on pulmonary and cardiovascular systems of human body.

• 한국치위생학회지
• /
• 제11권4호
• /
• pp.547-556
• /
• 2011

Objectives : The purpose of this study was to examine the relationship between the infection control education experiences of dental hygienists and the state of their infection control. Methods : The subjects in this study were the dental hygienists who worked in Seoul. The relationship of their infection control education experiences to their gender, marital status, academic credential, workplace, length of service, infection control implementation, experience of being exposed to infection, way of coping with it, hand washing, use of personal protection devices and equipment management was analyzed. Results : It is found that the variable to affect the state of infection control was educational experiences about handpiece water pipe management, ultrasonic scaler water pipe management and three-way syringe water pipe management. Conclusions : Dental hygienists who are one of major dental personnels should receive systematic education on infection control to acquire accurate knowledge to ensure the successful prevention of cross infection.

• 한국가시화정보학회:학술대회논문집
• /
• 한국가시화정보학회 2002년도 추계학술대회 논문집
• /
• pp.49-50
• /
• 2002

In micro-channels, the electro-viscous effect is caused by the electrical double layer on pressure-driven liquid flow. Velocity fields of flow inside micro-channels were measured using micro-PIV system for investigating the electro-viscous effect. De-ionized water and aqueous NaCl solutions with four different concentrations were used as working fluid in a PDMS micro-channel of $100{\mu}m$ width and $66{\mu}m$ height. The pressure gradient, dP/dx, was determined from the pre-determined input flow rate Q of syringe pump. The mean velocity $u_m$ used for calculating Reynolds number was obtained from the PIV velocity field data. These are used to plot the pressure gradient as a function of Reynolds numbers. The pressure gradient far lower concentration solution $(10^{-5}\;M)$ was higher than that for the higher concentration solution. The increase of flow resistance was about $30\%\;and\;37.5\%$ at Re=0.02 and 0.06, respectively.