• 식품기술
• /
• 제7권2호
• /
• pp.64-73
• /
• 1994

Using 20 lipases from various microbial origins medium chain glycerides, namely, mono-, di-, and tri-carproyl glycerols from glycerol and acid were synthesized in isooctane. Enzyme reaction was performed at 0.35 M of capric acid, 0.025M of glycerol and the same mass of silica gel to remove water in 5ml of isooctane with 30mg of lyophilized lipase. Among 20 lipases, eleven lipases showed good synthetic activities, especially lipase from Pseudomonas aeruginosa (Lipase PS), Rhizomucor miehei origined lipase and Chromobacterium viscosum lipase (Lipase CV) showed good activities for production of tricaproylglycerol, while Lipase OF-360 (origined from Candida rugosa) and Lipase D (Rhizopus delemar) were good for production of dicaprolyglycerol. The lipases, especially Lipase PS, have high thermal stability at $ 60^{circ}C$, and optimum pH of lyophilization for dehydrating the lipase was pH 6.5.

• 한국세라믹학회지
• /
• 제34권7호
• /
• pp.747-757
• /
• 1997

ZSM-5 zeolite composite membranes have been synthesized from a silica sol solution containing TPABr as an organic template by the dip-coating and the pressurized-coating hydrothermal treatment techniques. The CO2 separation efficiency of synthesized composite membranes was also investigated. The permeation mechanism of CO2 through ZSM-5 membranses was the surface diffusion, and that of N2, O2, and He gases was Knudsen diffusion or activated diffusion depending on the synthetic method of membranes and the measurement temperature. The CO2/N2 separation factor of the membrane prepared by the dip-coating hydrothermal treatment was 2.5 at about 12$0^{\circ}C$, while the ZSM-5 composite membrane synthesized by the pressurized-coating hydrothermal treatment technique showed the CO2/N2 separation factor of 9.0 at room temperature higher than that ever reported in the literature.

• Bulletin of the Korean Chemical Society
• /
• 제18권4호
• /
• pp.379-384
• /
• 1997

High quality MCM-41 is prepared from a gel of molar composition SiO2:0.20 CTACl:0.18 TMAOH:25 H2O aged at 20 ℃ for 24 hours before crystallization lasting for 48 hours. The (110) and (200) peaks of XRD pattern of high quality MCM-41 are unusually well resolved and the FWHM (full-width-at-half-maximum) of the (100) peak is 0.13° for as-prepared MCM-41 and 0.21° for calcined one, which indicate well-developed crystals. The properties of the crystal depend on the source and concentration of the reactants and the gel aging time. There is no induction period in the course of the synthesis, which is conveniently monitored by pH measurement. Gel aging, during which a spatial distribution of silicate polyanions and micellar cations is established, is essential for preparing high quality MCM-41. Surfactants with the same cationic organic group but different counteranions change the crystallization behavior. Highly basic gel (pH=12.6) favours the lamellar product; the quality of MCM-41 is lower as insufficient TMAOH is available to dissolve the silica.

• 농업과학연구
• /
• 제18권1호
• /
• pp.33-40
• /
• 1991

이 논문(論文)은 알카리 실리카 반응(反應)에 의한 인공경량골재콘크리트의 공학적(工學的) 성질(性質)에 관한 연구로서, 연구에 의하여 얻어진 결과(結果)를 요약(要約)하면 다음과 같다. 1. Type A 콘크리트는 재령이 증가함에 따라 압축강도가 증가하였고, type B와 C 콘크리트는 재령 28일(日)에서 최대 압축강도를 보였으나, 재령이 증가함에 따라 감소하였다. 2. Type A 콘크리트는 재령이 증가함에 따라 휨강도도 증가하였으나, type B와 C 콘크리트는 재령 14일(日)에서 최대강도를 보였으며, 그 이후부터 재령이 증가함에 따라 감소하였다. 3. 압축강도와 휨강도와의 상관관계(相關關係)는 type A 콘크리트는 유의성(有意性)을 인정할 수 있었으나, type B와 C 콘크리트는 유의성(有意性)을 인정할 수 없었다. 4. Type A, B 및 C 콘크리트의 흡수율은 재령이 증가함에 따라 다같이 증가하였고, type A 콘크리트에 비(比)하여 type B와 C 콘크리트는 7.0-7.8배(倍)로 나타났으며, 흡수율은 모두 수침초기(水浸初期)에 높게 나타났다. 5. 압축강도와 흡수율과의 상관관계(相關關係)는 type A 콘크리트는 유의성(有意性)을 인정할 수 있었으나, type B와 C 콘크리트는 유의성(有意性)을 인정할 수 없었다.

• International Journal of Internet, Broadcasting and Communication
• /
• 제7권2호
• /
• pp.96-104
• /
• 2015

Fischer Tropsch reaction is one of the interesting topic for renewable and clean energy. Polymerization of carbon monoxide or carbon dioxide with hydrogen over metal supported catalyst can produce long chain hydrocarbons. Synthetic liquid hydrocarbons are promising alternative to fossil fuels. This research work has been focused on the synthesis of Fe based catalyst for Fischer Tropsch reaction. Mesoporous silica (MS) support prepared by a precipitation method using two different washing solution, distilled water (DW) and acid in ethanol solution (ET), and different calcination temperature. Then, Fe/MS was prepared by an incipient wetness impregnation method. All of samples were systematically characterized using various physical and chemical techniques. TEM and XRD analysis were used to ensure that the cubic Ia3d mesostructure is stable after calcination. FTIR spectra are useful to ascertain the existence of template in the support. TPR studies were also used to understand the nature of Fe species and their reducibility. The results reveal that washing the support with distilled water and calcination at $550^{\circ}C$ can efficiently remove the triblock copolymer templates. The existence of template in the support affects the textural properties of all catalyst investigated.

• 대한전자공학회:학술대회논문집
• /
• 대한전자공학회 2001년도 The 6th International Symposium of East Asian Resources Recycling Technology
• /
• pp.610-615
• /
• 2001

Over 800 thousand tons per year (TPY) agricultural biowastes, such as sugar cane bagasse, sugarcane leaf, rice straw, rice husk and corn leaf, are produced in Taiwan. These biomasses are the major types of agricultural wastes and are abundantly available. However, these biowastes cause disposal and landfill problems. Ossification ashes of the agricultural biowastes containing 70-95 % amorphous silica would make the utilization system of agricultural biowaste ashes become highly economically and environmentally attractive. Experimentally, high crystallinity (99%$^{+}$) zeolites ZSM-5 and ZSM-48 synthesized from the reaction mixtures containing a silica source from ashes of these biowastes gasification were investigated. Tetrapropylammonium bromide (TPABr) and 1,6-diamino-hexane (C$_{6}$ DN) were used as structure-directing agents in syntheses of ZSM-5 and ZSM-48, respectively. X-ray powder diffraction (XRD) and scanning electron microscopy/energy dispersive spectroscopy (SEM/EDX) data indicated that ZSM-5 or ZSM-48 with a high crystallinity can be obtained within 48 hours of crystallization in the high pressure (15-20 atm) autoclave at 393-473 K. The Si/Al ratios of synthetic zeolite products were determined by X-ray fluorescence (XRF) and induced couple plasma/mass spectroscopy (ICP/MS). It was observed that the ZSM-5 crystals a.e composed of hexagonal rod-shaped crystals with typically 8-13 пm in size by SEM. In addition, ZSM-48 crystalline materials are composed of spherical aggregates of needle-shaped or rod-like crystals with typically 2-3 пm in diameter and 6-8 пm in length.h.

• 한국분말재료학회지
• /
• 제25권1호
• /
• pp.12-18
• /
• 2018

Cost-effective functional phosphor nanoparticles are prepared by introducing low-cost $SiO_2$ spheres to rare-earth phosphor ($YVO_4:Eu^{3+}$, $YVO_4:Er^{3+}$, and $YVO_4:Nd^{3+}$) shells using a sol-gel synthetic method. These functional nanoparticles are characterized by X-ray diffraction, X-ray photoelectron spectroscopy, transmission electron microscopy, and general photoluminescence spectra. The $SiO_2$ sphere occupying the interior of the conventional phosphor is advantageous in significantly reducing the cost of expensive rare-earth phosphor nanoparticles. The sol-gel process facilitates the core-shell structure formation; the rare-earth shell phosphor has strong interactions with chelating agents on the surfaces of $SiO_2$ nanoparticles and thus forms layers of several nanometers in thickness. The photoluminescence wavelength is simply tuned by replacing the active materials of $Eu^{3+}$, $Er^{3+}$, and $Nd^{3+}$. Moreover, the photoluminescent properties of the core-shell nanoparticles can be optimized by manipulating the specific contents of active materials in the phosphors. Our simple approach substitutes low-cost $SiO_2$ for expensive rare-earth-based phosphor materials to realize cost-effective phosphor nanoparticles for various applications.

• Elastomers and Composites
• /
• 제33권4호
• /
• pp.231-237
• /
• 1998

보강성 충전제가 첨가된 고무블렌드의 물리적 특성을 조사하기 위해 카본블랙이 첨가된 유화중합 고무블렌드와 실란이 커플링된 실리카가 첨가된 용액중합 고무블렌드의 가황특성, 점탄성특성, 내마모 및 고무보강성 평가하였다. 유화중합 고무블렌드는 가장 높은 총결합고무량을 나타냈으나, 용액중합 고무블렌드는 고무블렌드 비율에 관계없이 일정한 총결합고무량을 나타내었다. 고무의 미세구조중 비닐 및 스틸렌 함량이 낮을수록, 배합고무중 총결합고무량이 높을수록 가황속도는 빠르게 나타났으며, 고무보강성 지표인 모듈러스는 총결합고무량과 선형적인 관계를 나타냈다. 많은 PICO 손실량은 고무의 미세구조중 비닐 및 스틸렌 함량이 증가할 때 나타났으나, 적은 PICO 손실량은 실란이 커프링된 실리카를 함유한 용액중합 고무블렌드에서 부타디엔의 비율이 증가할 때 관측되었다. 용액중합 고무블렌드는 유화중합 고무블렌드에 비해 $0^{\circ}C$에서 높은 손실계수, $60^{\circ}C$에서는 낮은 손실계수를 나타내었다.

• 한국광물학회지
• /
• 제11권2호
• /
• pp.117-125
• /
• 1998

Crystallization behavior of platinum minerals within Pt-Sb-Bi bearing ore magmas and mineralogical properties of the existing minerals were investigated at 1,00$0^{\circ}C$ by synthetic experiment. High purity reagents were used as starting materials and silica tubings as containers. Reaction products were analysed by reflecting microscopy, X-ray diffraction, electron probe microanalysis, and micro-hardness test. Stable minerals at 1,00$0^{\circ}C$ are platinum, electron probe microanalysis, and micro-hardness test. Stable minerals at $1,000^{\circ}C$ are platinum, stump-flite (PtSb) and geversite (PtSb2). They are in equilibrium with liquid (ore magma). Platinum contains considerable amount of Sb of 7.5 at.%, whereas Bi only up to 0.9 at.%. Pure stumpflite is hexagonal with space group P63/mmc, and unit cell parameters are a=4.1318(6), c=5.483(1)$\AA$. VHN50=417(2)$\AA$. Geversite has cubic structure with space group Pa3. Cell parameters are a=6.4373(2)$\AA$ and Vicker hardness values VHN50=663.5 (566~766). Both stumpflite and geversite show solid solution and their end-members are Pt48.8Sb40.7-Bi10.5, and Pt33.7-Sb59.8Bi6.5, respectively. Although stumpflite (m.p. $1,043^{\circ}C$) and unnamed PtBi (m.p. 7$65^{\circ}C$) do not form a complete solid solution at $1,000^{\circ}C$, they are known, at $600^{\circ}C$, to form a continuous solid solution. Geversit (m.p. $1,226^{\circ}C$) also forms complete solid solution with insizwaite (m.p. $660^{\circ}C$). Unit cell dimensions of the minerals above increases with the amount of Bi substituting for Sb.

• Elastomers and Composites
• /
• 제44권3호
• /
• pp.232-243
• /
• 2009

근래 고성능 친환경 타이어의 개발요구에 의하여 경제성(낮은 회전 저항)과 안전성(wet traction) 및 내마모성면에서 균형있는 특성을 가지는 타이어 트레드 고무의 합성 제조 기술이 중요하게 대두된다. 이를 위하여 다양한 기능성 용액중합 SBR의 개발과 함께 고무/충전제 간의 상호작용 증진 기술이 학술적으로나 산업적으로 활용되고 있다. 본 고에서는 기존의 카본블랙 고무와 함께 최근 green tire로서 각광 받는 실리카 충전 고무에서 충전제와 상호반응이 가능한 화학적 변성 SBR과 커플링제를 이용한 고성능 타이어 트레드 고무의 합성 제조 기술에 대하여 최근 연구 방향과 함께 작용 메카니즘에 대하여 고찰하였다.