• 통합자연과학논문집
• /
• 제7권2호
• /
• pp.130-137
• /
• 2014

Resins were synthesized by mixing N-phenylaza-15-crown-5 macrocyclic ligand attached to styrene (2th petroleum in 4th class hazardous materials) divinylbenzene (DVB) copolymer with crosslink of 1%, 2%, 6%, and 12% by substitution reaction. The synthesis of these resins was confirmed by content of chlorine, element analysis, thermo gravimetric analysis (TGA), surface area, and IR-spectroscopy. The effects of pH, equilibrium arrival time, dielectric constant of solvent and crosslink on adsorption of metal ions by the synthetic resin adsorbent were investigated. The metal ions were showed fast adsorption on the resins above pH 4. The optimum equilibrium time for adsorption of metallic ions was about two hours. The adsorption selectivity determined in ethanol was in increasing order uranium (VI) > zinc (II) > europium (III) ions. The uranium ion adsorbed in the order of 1%, 2%, 6%, and 12% crosslink resin and adsorption of resin decreased in proportion to the order of dielectric constant of solvents.

• 한국건축시공학회지
• /
• 제3권4호
• /
• pp.73-78
• /
• 2003

In this Study, we examined the influence of characteristics of rolling loads by casters on separation resistance of substrate concrete and synthetic resin floor coating. In the experiment, we first prepared floor samples having substrate concrete of various compressive strength, surface hardness and surface configurations, then put the coated samples to the test of separation resistance with Rolling Caster Loading Machine. Three loading conditions consisted of different kinds of casters, rolling conditions, and coating materials. Consequently, we clarified that the grade of separation resistance varied widely according to the characteristics of substrate concrete and rolling loads.

• 한국응용과학기술학회지
• /
• 제37권4호
• /
• pp.1034-1040
• /
• 2020

스테인레스 스틸에 대한 합성된 폴리우레탄-에폭시 수지의 기계적 특성은 SEM, FT-IR, 인장특성, 그리고 EIS에 의한 특정질량손실량, 입도분석 등에 의해 물성을 측정하였다. 친환경적인 NATM 도료에 관한 관심이 고조됨에 따라 스테인레스 등의 금속에 코팅하는 무용제 도료를 합성하였다. 폴리올, IPDI, 충진제, 실리콘 계면활성제, 촉매 등이 함유된 기존 중방식수지보다 폴리올, MDI, 충진제, 실리콘 계면활성제, 촉매가 함유되어 합성된 중방식수지의 도료가 온도변화에 따른 인장강도가 증가하였고, 전해성이 높은 용액 속에서 저헝력이 크게 측정되었으며, 내구력과 강도가 양호하였다. 견고한 NATM 수지의 기계적 특성은 가교와 부식환경의 차단력이 증가함에 따라 강도가 증가하였다. 결론적으로 중방식의 가교된 미세조직은 방청코팅이 어려운 스테인레스 스틸 같은 금속물질 코팅에도 좋은 실험결과를 보여주었다.

• 한국염색가공학회지
• /
• 제30권4호
• /
• pp.275-287
• /
• 2018

In recent years, research on the development of eco-friendly synthetic suede based on water-dispersed polyurethane resin and non-fluorine water repellent has been conducted. Synthetic suede has a problem that the fastness to dyeing is greatly lowered after the water-repellent processing at a high temperature of $160^{\circ}C$ because the polyester is dyed with a disperse dye. Therefore, in this study, silica was added to water-dispersed polyurethane resin to improve dye fastness. To distribute the $PUD-SiO_2$ mixture evenly in the water-dispersed polyurethane resin, sufficient stirring was done for a period of time. When the $PUD-SiO_2$ mixture(PUD 1-5%) is applied to the substrate, it is confirmed through SEM that the mixture is uniformly applied without particle condensation. The results showed that silica with a diameter of 4~12nm and BET of $200{\sim}380g/m^2$ had the ability to improve dispersibility and fastness.

• 한국응용과학기술학회지
• /
• 제36권4호
• /
• pp.1358-1364
• /
• 2019

스테인레스 스틸에 대한 합성된 폴리우레탄-에폭시 수지의 기계적 특성은 SEM, FT-IR, 인장특성, 그리고 EIS에 의한 특정질량손실량, 입도분석 등에 의해 물성을 측정하였다. 친환경적인 중방식 도료에 관한 관심이 고조됨에 따라 스테인레스 등의 금속에 코팅하는 무용제 도료를 합성하였다. 폴리올, IPDI, 충진제, 실리콘 계면활성제, 촉매 등이 함유된 기존 중방식수지보다 폴리올, MDI, 충진제, 실리콘 계면활성제, 촉매가 함유되어 합성된 중방식수지의 도료가 온도변화에 따른 인장강도가 증가하였고, 전해성이 높은 용액 속에서 저헝력이 크게 측정되었으며, 내구력과 강도가 양호하였다. 견고한 중방식수지의 기계적 특성은 가교와 부식환경의 차단력이 증가함에 따라 강도가 증가하였다. 결론적으로 중방식의 가교된 미세조직은 방청코팅이 어려운 스테인레스 스틸 같은 금속물질 코팅에도 좋은 실험결과를 보여주었다.

• 약학회지
• /
• 제23권3_4호
• /
• pp.147-152
• /
• 1979

Experiments were carried out to investigate for the interaction between FAD solution and synthetic resin containers made of polyvinylchloride(PVC), polyethylene(PE), and polycarbonate(PC), and for the effect of glycyrrhizine or malic acid on stabilization of FAD in aqueous solution by accelerated stability analysis. Analysis of FAD was determined by means of spectrometer and by separating by paper chromatography and metal ions were detected by atomic absorption spectrophotometer, which were extracted from containers by means of Food and Additive Regulation Standard. The thermal decomposition of FAD in aqueous solution was pseudo first order reaction and it was inhibited by adding glycyrrhizine or malic into the solution. PVC, PE and PC containers accelerated the decomposition of FAD in solution. It is assumed that bivalent heavy metals in resin containers may catalize the hydrolysis of FAD. The metals detected from the containers were Ca, Zn, Cu, Fe, Pb and Cd. And the total amounts of detected metals from PVC were 6.2mcg/cm$^{2}$, PE, 5.5mcg/cm$^{2}$, and PC, 2.7mcg/cm$^{2}$ which were proportional to the rate constant of FAD decomposition in aqueous solution.

• 보존과학회지
• /
• 제31권4호
• /
• pp.499-506
• /
• 2015

보물 제326호 이순신 유물 일괄은 장검 2점, 옥로 1점, 요대 1점, 도배 구배 2점 등 총 6점으로 구성되어 있다. 이들 유물들은 2011년 4월 28일 "충무공이순신기념관" 개관을 위해 2011년 초에 보존처리를 완료하였다. 이 때 장검 2점의 혈조 내 안료에 대한 비파괴 표면 분석을 실시한 결과 합성수지도료로 추정되었다. 본고에서는 이 합성수지도료로 추정되는 안료의 정확한 조사 및 제거에 대해 논하였다. 혈조 내 안료를 규명하기 위해 광학현미경, 전자현미경, Micro-XRF, XRD, FT-IR을 이용하여 분석하였다. 분석 결과 두께는 $10{\sim}90{\mu}m$의 단일층으로 확인되었고 성분분석 결과 Pb, Cr이 주성분을 이루고 있으며 XRD 분석을 통해 납 크로뮴 몰리브데넘 산화물로 확인되었다. 또한 접착제 성분을 확인하기 위해 FT-IR 분석을 실시한 결과 알키드 수지로 판단되었다. 이를 통해 근래에 합성수지도료로 채색한 것으로 추정된다. 이 합성수지도료는 대부분의 유기용제에 쉽게 반응하여 사용이 용이하고 금속에 영향이 없으며 쉽게 제거 가능한 아세톤을 사용하여 제거하였다. 합성수지도료 제거 과정에서 전통안료의 유무를 확인하기 위해 도료 전체를 수집하였으나 확인되지 않았다.

• 환경위생공학
• /
• 제21권4호
• /
• pp.49-60
• /
• 2006

The ion exchange resins have been synthesized from chlormethyl styrene - 1,4 - divinylbenzene(DVB) with 1%, 2%, 4% and 8%-crosslinking and 1-aza-18-crown-6 macrocyclic ligand by copolymerization method. Content of chlorine in styrene-DVB copolymer was decreased as crosslink increased and it is because as crosslink increased 1%, 2%, 4% and 8% DVB content increased and crosslink density increased and cavity was reduced. Functional group of resin almost disappeared as C-C1 peak around $700cm^{-1}$ was substituted with 1-aza-18-C-6 macrocyclic ligand and new peak of C-N around $1020cm^{-1}$ appeared, so it was confirmed that styrene-DVB copolymer and ligand were compounded. As crosslink increased in the analysis of element contents, it resulted in the reduction of nitrogen content and it is because as crosslink increased, it led to the reduction of chlorine content in the process of substitution reaction and it affected macrocyclic ligand substituted. Thermo analysis curve of functional synthetic resin decomposed three part of 1-aza-18-C-6, styrene, and DVB. Form of functional synthetic resin showed distortion of its particles as macrocyclic ligand was introduced to styrene-DVB copolymer and hydrogen of ligand caused substitution with chlorine element of styrene molecule.

• Bulletin of the Korean Chemical Society
• /
• 제35권8호
• /
• pp.2381-2384
• /
• 2014

A solid-phase synthetic approach is reported for the synthesis of an ascorbic acid (ASA)-dipeptide conjugate that exhibited enhanced antioxidant activity. The N-terminal amino group of dipeptide (Ala-Ala) on a resin support was first activated by 1,1'-carbonyldiimidazole (CDI), and then reacted with an ASA derivative. The addition of a base, triethylamine (TEA), promoted nucleophilic acylation of ASA derivative and yielded a desired product (ASA-Ala-Ala) with enhanced purity, when cleaved from the resin. Compared to the approach where a C3 hydroxyl group of ASA was first activated with CDI and then reacted with the amino group of dipeptide on the resin, this new approach allowed a significant reduction of a total reaction time from 120 h to 8 h at $25^{\circ}C$. As-prepared ASA-dipeptide conjugate (ASA-Ala-Ala) showed improved antioxidant activity compared to ASA.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2000년도 학술대회 논문집 전문대학교육위원
• /
• pp.13-16
• /
• 2000

This paper developed a manufacturing method for resin magnet contained rare earth element and synthetic resin. Use this manufacturing method, developed a electro wave absorbent material and plant growth promote machine. Result of experiments shown to have excellent on bean sprouts cultivate, computer monitor, television monitor and cellular phone etc.