• 한국자동차공학회논문집
• /
• 제10권2호
• /
• pp.40-47
• /
• 2002

Because UV wavelength lights can activate photocatalysts, plasma is used as a light source of a photocatalytic reactor. Even though plasma has good intensity for photo reaction, substrate of catalyst coating was limited by the geometry of plasma generator. Usually bead type substrate was used for a pack bed type reactor. Honeycomb monolith type substrate was used with UV lamps instead plasma, due to the light penetration the honeycomb monolith length was too short to show good activity In this study a photocatalytic reactor, which is using a honeycomb monolith substrate, was investigated with plasma as an activation light source. As a parametric study the effects of 1311owing factors on plasma generation and power consumption are examined; supply voltage, substrate length, environment condition, catalyst loading and ratio. Using the test results, the practicability test was done with simulated synthetic gases representing bad smells and automotive exhaust gases.

• 한국대기환경학회지
• /
• 제11권4호
• /
• pp.373-375
• /
• 1995

In order to turn the Bag Filter to the Purse Filter, the past system that the adverse reason is removed, the input of synthetic materiality of dust and air is placed down, and the output is placed up has been improved so that any adverse effect shall not be raised. The form of filteration mechanism is changed from a cylinder from, and the dust and air is mixed to make the entry velocity and one person can velocity of the mixed materiality become lower by the use of infinity, and the reception of filteration mechanism has been made reasonably. The dust separated from the filteration mechanism is desceded down, snd the mixde materiality is ascended up. So, a cross point is formed, and a collision and a friction is occurred from its process, and at its result, dust is scattered to stick to a filter cloth, therefore, the loss of pressure shall ont be appeared by cause of the increase of dust-loading.

• 한국양식학회지
• /
• 제16권4호
• /
• pp.203-209
• /
• 2003

Nitrification efficiency of fixed film biofilters with sand, loess bead, and styrofoam bead in biofilter columns of 1-m height and 30 cm width was studied. Synthetic wastewater was continuously supplied to the culture tank to maintain total ammonia nitrogen (TAN) concentration in the inflow water at around 8 mg/L. The hydraulic loading rate was set at 200 ㎥/$m^2$/day. TAN conversion was stabilized after about 90 day conditioning for all the selected filter media but with net accumulations of nitrite. On the volumetric basis, conversion rates of TAN and nitrite were the highest in styrofoam bead filter. Mean volumetric TAN conversion rates in the final samples were 682, 269, and 79 g TAN/㎥/day in the styrofoam bead, sand and loess bead filters, respectively. Low gravity and cost of styrofoam bead render the handling easier and more cost-effective.

• Journal of international Conference on Electrical Machines and Systems
• /
• 제1권1호
• /
• pp.128-134
• /
• 2012

This paper gives an overview of the requirements for electrical equipment in potentially explosive atmospheres and describes how these are applied to electrical machines and drives in hazardous areas. The method by which equipment can be shown to be safe in a whole range of gases, by testing in a single test gas, is covered. It is shown how the more recently introduced methods of protection for hazardous areas, increased safety and nonsparking, are ideally suited to AC machines and drives. A novel method of measuring the fullload temperature rise of electrical machines for hazardous, and other areas, without the need to connect a mechanical load to the machine's drive shaft is explained.

• 한국미생물·생명공학회지
• /
• 제25권3호
• /
• pp.305-310
• /
• 1997

For the continuous production of transglucosylated steviosides, cyclodextrin glucanotransferase from Bacillus macerans was immobilized onto Diaion HPA 75 (styrene-divinylbenzene resin) that was screened from ion exchange resins, synthetic adsorbents and chitosan derivatives. The parameters influencing enzyme immobilization were examined in order to maximize the activity of immobilized enzyme. The optimum conditions for immobilization turned out to be: contact time 2 hr at 30$circ$C, pH 6$sim$9, and enzyme loading 20mg protein/g resin at 4.4 Os/Kg as osmolarity. Competing with other molecules having low molecular weight, enzyme was immobilized reversibly. The activity of immobilized enzyme was as high as 180U/g resin when the diafiltrated solution of stock enzyme was used. The optimum conditions for transglucosylation were as follows: pH 6.0, temperature 50$circ$C, 30% substrate solution composed of 15% stevioside mixture and 15% dextrin of which value of dextrose equivalent was about 9.0.

• 대한토목학회논문집
• /
• 제8권3호
• /
• pp.129-138
• /
• 1988

본(本) 연구(硏究)에서는 잔자갈을 충전(充塡)한 간접폭기방식(間接曝氣方式) 침지여상(浸漬濾床)의 설계(設計)나 운전에 합리성(合理性)을 부여하기 위해, 폭기조(曝氣槽)에서 침지여상(浸漬濾床)으로의 산소공급(酸素供給) 특성(特性) 및 잔자갈의 입경(粒徑), 순환수(循環水)의 수량부하(水量負荷), $BOD_5$ 용적부하(容積負荷) 변화에 대한 처리효율(處理效率)을 검토하였다. 실험(實驗)은 $20^{\circ}C$를 유지한 침지여상(浸漬濾床)의 하부(下部)에 합성하수(合成下水)를 상향류(上向流)로 연속주입(注入)하였고, 동시(同時)에 포기조에서 충분히 포기된 물을 침지여상(浸漬濾床)에 상향류(上向流)로 순환(循環)시키면서 수행되었다. 실험결과(實驗結果) 가장 적당한 잔자갈의 입경(粒徑)은 11 mm 정도였으며, 설계(設計) 및 운전을 위해서는 잔자갈의 표면적부하(表面的負荷)보다는 침지여상(浸漬濾床)의 용적(容積)을 기준으로 하는 것이 타당하며, 90% 이상의 $BOD_5$ 제거율을 얻기 위해서는 BOD 용적부하율(容積負荷率)을 $1.0kg-BOD_5/m^3{\cdot}d$ 이하로 운전하여야 하며, 이때 순환수(循環水)($DO7.2mg/{\ell}$)의 수량부하(水量負荷)는 $189m^3/m^3{\cdot}d$ 이상으로 유지시켜야 할 것으로 나타났다. 또 본실험(本實驗) 범위내에서 반응속도계수(反應速度係數) $K_1$은 순환수(循環水)의 수량(水量) 부하(負荷) 및 잔자갈의 입경(粒徑)과 밀접한 관계(關係)가 있음을 알았다.

• 한국전자파학회논문지
• /
• 제24권12호
• /
• pp.1128-1139
• /
• 2013

다목적실용위성 5호는 영상 레이더(SAR: Synthetic Aperture Radar)을 탑재하여 야간이나 구름이 있는 지역에 대해서도 지속적인 영상촬영이 가능하다. 발사 후 초기 운영 시험에서는 SAR 탑재체에 의해 관측된 영상에 대한 기하 및 복사 보정을 수행한다. 이러한 보정은 지표상의 위치 및 RCS(Radar Cross Section)을 알고 있는 보정장치에서 반사된 SAR 신호에 의해 나타난 영상 픽셀에서의 위치 및 값을 이용하여 처리된다. 이러한 보정을 위해 기존 반사기와 달리 능동 트랜스폰더는 RCS 값을 변경할 수 있으며, 내부 시간 지연 기능에 의해 가상의 위치로 이동하는 효과를 영상에서 나타낼 수 있다. 본 논문에서는 능동 트랜스폰더의 개발에 필요한 요구사항을 도출하여 이로부터 설계, 조립 및 시험결과를 정리하였다.

• 한국항해항만학회지
• /
• 제28권3호
• /
• pp.207-211
• /
• 2004

LMTT(Linear Motor-based Transfer Technology)는 항만 자동화를 위한 컨테이너 터미널용 수평 이송 장치이며, rail과 shuttle car(mover)에 부착된 stator module로 구성된 PMLSM(Permanent Magnetic Linear Synchronous Motor)에 의해 구동된다. 본 논문은 inner beam과 outer beam의 높이비가 LMTT용 shuttle car의 frame 강도 및 강성에 미치는 영향을 살펴보았다. 설계변수는 inner beam의 단면형상 및 높이비로 설정하였으며, 유한요소해석을 통하여 설계변수가 frame의 강도 및 강성에 미치는 영향을 살펴보았다.

• 상하수도학회지
• /
• 제20권4호
• /
• pp.519-526
• /
• 2006

In this study, the major operating factors in SND(simultaneous nitrification and denitrification) using bioreactor packed with submerged cilia media and granular sulfur such as variation of nitrification rate, organic matter removal efficiency and denitrification efficiency in different DO concentration were mainly evaluated. Synthetic wastewater and actual sewage were used as influent wastewater. Experiment with synthetic wastewater as influent wastewater was divided into three phases with the adjustment of DO concentration. As the results, nitrification efficiency and T-N removal efficiency in the Phase 3(DO 1.0~2.0 mg/L) were 99% and 52.3%, which is significantly greater than those in other two phases. Also, loading rate and denitrification efficiency of SCPGS(Submerged Cilia media Packed with Granular Sulfur) were calculated as $0.44kg\;NO_3^--N/m^3-day$ and 50%, respectively. On the other hand, nitrification rate was decreased from 99% to 64% according to the DO concentration with the variation from 3.0~3.5 mg/L(phase1) to 0.4~0.6mg/L(phase2). Although the nitrification rate was decreased in 64% according to the variation of the DO concentration, T-N removal rate was rapidly increased to 49% by increasing of the denitrification efficiency. Experiment with actual sewage as influent wastewater was carried out to evaluate efficiency of SCPGS in real operation condition of full-scale sewage water treatment plant. At the time, T-N removal rate in this experiment and full-scale wastewater treatment plants were given by 43% and 20%, respectively. The above results indicate that SCPGS can be used as an advanced treatment process for economical efficiency considered.

• 한국환경과학회지
• /
• 제17권12호
• /
• pp.1343-1351
• /
• 2008

The activated sludge obtained from wastewater coke oven plant was immobilized by entrapment with polyethylene glycol (PEG). The effects of several factors on the biodegradation of $CN^-$ from. synthetic wastewater were investigated using batch and continuous reactors. The degradation rate of $CN^-$ increased with increasing of the immobilized bead volume in the reactor. Approximately 7.65mg/L of $NH_4-N$ was produced upon the degradation of 35mg/L of $CN^-$. When high concentrations of the toxic cyanide complex were used in the testing of cyanide degradation, the free activated sludge could be inhibited more than that of the immobilized activated sludge. When the phenol concentration was higher than 400mg/L in the synthetic wastewater, approximately 98.4% of $CN^-$ was removed within 42 hours by the immobilized activated sludge. However, the cyanide was not completely degraded by the tree activated sludge. This indicates that high phenol concentrations can act as a toxic factor for the free activated sludge. A $CN^-$ concentration of less than 1mg/L was achieved by the immobilized sludge at the loading rate of 0.025kg $CN^-/m^3-d$. Moreover, it was found that the HRT should be kept for 48 hours in order to obtain stable treatment conditions.