• Korean Journal of Air-Conditioning and Refrigeration Engineering
• /
• v.8 no.4
• /
• pp.473-483
• /
• 1996

To protect the ozone layer, R22 will be replaced with HFCs. R407C is a leading candidate as alternative refrigerant for air conditioner due to its similar thermodynamic characteristics with R22. In replacing R22 with R407C, the compatibility with lubricating oil is of major concern. Polyol ester (POE) oil among the synthetic oils is considered to be the best lubricant for use with R407C because of good electrical properties and miscibility. However, lubricating ability of mixture of R407C/POE oil is lower than that of R22/mineral oil due to the production of acid by hydrolysis which causes corrosive wear. Therefore, to minimize water content, it is needed to develop a molecular sieve desiccant which is compatible with R407C and ester oil. This paper discusses (1) the change of properties of POE oil when current molecular seive is used, (2) the effects of POE oils and additives on durability of compressor. Through compressor life test and bench wear test, it was found that inadequate use of POE oils and additives may promote the deteriation of molecular sieve, resulting in decrease of durability of compressor.

• Korean Journal of Food Science and Technology
• /
• v.25 no.1
• /
• pp.9-14
• /
• 1993

The free, ester and insoluble bound phenolic acids in the extracts from defatted perilla seed flour were isolated and their antioxidative activities were evaluated in comparison with commercial synthetic antioxidants. Total phenolic content of the perilla seed was 0.75% as chlorogenic acid. Each percent ratio of the content of free, ester, and insoluble bound phenolic acid to total phenolic content was 87.5, 7.5 and 5.0% respectively. Chlorogenic acid was identified as a major phenolic acid and a small amount of caffeic acid was also identified in the free phenolic acid extract, but they were not found in soluble ester and insoluble bound phenolic extracts by two dimensional paper chromatography. Each type phenolic extract from 30g of deffated perilla flour showed antioxidant activity similar to that of BHT (0.02%, w/w) in 200g of soybean oil substrate inspite of the difference of each phenolic content.

• Korean Journal of Food Science and Technology
• /
• v.27 no.4
• /
• pp.564-570
• /
• 1995

N-Benzoyl-L-aspartyl-L-phenylalanine methyl ester(BzAPM), a novel aspartame precursor, was investigated for its enzymatic synthesis by immobilized thermolysin using a water-miscible organic solvent system. The substrate used were N-benzoyl-L-aspartic acid(BzAsp) and L-phenylalanine methyl ester (PheOMe). Synthetic conditions such as substrates concentration, temperature, pH, and some metallic ions were varied to study their effects on BzAPM synthesis. The synthetic reaction rate increased linearly as the PheOMe concentration increased at a constant concentration of BzAsp(100 mM), and the maximum reaction rate was obtained at BzAsp concentration of 200 mM when 300 mM PheOMe was used. The optimum pH and temperature were found to be 6.1 and $40^{\circ}C$, respectively. The metallic ions such as $Zn^{2+},\;Mg^{2+},\;Mn^{2+},\;Fe^{2+},\;Pb^{2+}\;and\;Cu^{2+}$ at 5 mM level showed inhibitory effect on BzAPM synthesis, while $Co^{2+}$ and $Ca^{2+}$ ion increased synthesis. $Co^{2+}$ ion was also found to have synergistic effect with $Ca^{2+}$ ion. Benzoic acid, L-phenylalanin and NaCl showed inhibitory effect.

• Preventive Nutrition and Food Science
• /
• v.5 no.2
• /
• pp.86-92
• /
• 2000

Conjugated linoleic acid(CLA) refers to a collective term of positional and geometric isomers of linoleic acid, which are different in their biological activities. The predominant isomer of CLA in animal tissues is cis-9, trans-11; smaller amounts of trans-10, cis-12 CLA isomers, CLA methyl ester (CLA-ME) was chemically syn-thesized from linoleic acid by the alkaline isomerization method. The synthetic CLA-ME, mainly composed of cis-9, trans-11 CLA and trans-10, cis-12 CLA, was dissolved in acetone, stored at 68$^{\circ}C$ for 1 day, and the supernatant(cis-9, trans-11 CLA-Me) was separated from the precipitate (trans-10, cis-12 CLA-Me). After the processes were repeated three times at -68$^{\circ}C$, the whole processes were repeated three times at -71$^{\circ}C$ in order to increase the purity of these two isomers. The cis-9, trans-11 CLA-Me and trans-10, cis-12 CLA isomers were further purified by the urea adduct. Purities of the cis-9, trans-11 CLA-Me and trans-10, cis-12 CLA-Me were 90.3 and 99.9%, respec-tively. This method could be employed for the preparation of a large quantity of highly purified cis-9, trans-11 CLA-Me or trans-10, cis-12 CLA-Me from synthetic CLA-Me.

• Korean Journal of Food Science and Technology
• /
• v.25 no.2
• /
• pp.148-153
• /
• 1993

Composition and structure of synthetic glucitol fatty acid polyesters (GPE)-a potential fat substitute-were investigated. Also degree of substitution (D.S) of GPE was determined according to the relative ester distribution within it to evaluate the feasibility of GPE using as a fat substitute. The GPE was separated into single ester group by a normal-phase HPLC and D.S of it was identified to be 6. Absorption band at $1747\;cm^{-1}$ in the IR spectrum of GPE indicated that there were ester bonds within GPE molecules. which link fatty acid moiety to glucitol. Disappearance of the hydroxyl proton signals of glucitol in the H-NMR spectrum of GPE implied that most of hydroxyl groups in glucitol participated in the formation of ester bonds with fatty acids. In addition the D.S estimated from the quantitative proton integration of GPE coincided well with the D.S of GPE determined by hydroxyl value measurement. In conclusion, the GPE synthesized in this study was found to be a glucitol fatty acid hexaester so that it is expected to be used as a fat substitute in the near future.

• Proceedings of the Korean Society of Tribologists and Lubrication Engineers Conference
• /
• 2001.06a
• /
• pp.162-177
• /
• 2001

The hydrolysis rates of seven kinds of polyol ester base oils 〔POEs〕 of different branch shape were investigated by using a simple apparatus under mild acidic condition. Seven polyol ester base oils were made of poly hydric alcohols of two-four valence, normal or branched fatty acids of different carbon number. p-Toluene sulfonic acid was used as acid catalyst to accelerate the rate of hydrolysis. Partial esters and fatty acid produced by sequential hydrolysis of POEs were identified and their concentrations were determined by calibrated-internal standard method using Gas Chromatography. The rate constants of each step in sequential hydrolysis were determined by the least square method from rate equation and the concentration of each component, were compared with one another. It was shown that the rate of hydrolysis of POEs was strongly affected by whether molecular structure of fatty acid was straight chain or branch chain and which position was branched. The hydrolysis stability for all the POEs can be reasonably explained by using a steric hindrance effect anticipated fi:om their molecular structures affecting as water molecule makes an attack on the carbonyl carbon of POEs.

• Korean Journal of Veterinary Research
• /
• v.25 no.1
• /
• pp.7-17
• /
• 1985

Many investigators have been pursuing various attempts so far to produce hepatitis B surface antigen(HBsAg) vaccines using the techniques such as isolation from plasma of chronic HBsAg carrier, recombinant DNA technique or preparation of synthetic peptides specific for immunogenic determinants. Hepatitis B virus can not grow on any cell lines by the tissue culture technique at the present time. The plasma of chronic HBsAg carrier is expensive and its source is limited. The HBsAg from the recombinant DNA technique gave still very low yield. Another approach, therefore, has been initiated to develop a synthetic hepatitis B virus vaccine. The possible use of several distinct synthetic vaccines in prophylaxis can be facilitated by availability of full synthetic immunogens. Peptides synthesized for potential application as antiviral vaccines have been mostly tested in the form of conjugates with carrier proteins, although the free synthetic peptide can be immunogenic. To understand basic knowledges on the antigenicity and immunogenicity of a synthetic peptide specific for major immunogenic determinant of HBsAg, a nonapeptide, $H_2N^{139}Cys-Thr-Lys-Pro-Thr-Asp-Gly-^{146}Asn-Aba$ COOH, which corresponds to HBsAg amino acid residues 139 to 147, was synthesized by the Merrifield's solid-phase method with a slight modification. The antigenicity and immunogenicity of this specific synthetic peptide were examined comparing with purified plasma-derived natural HBsAg. The results obtained are as follows; 1. The peptide synthesized showed the identical amino acid composition to the theoretical value. The degree of purification and molecular weight were acertained by methods of high performance liquid chromatography and mass spectrometry. 2. Using m-maleimidobenzoyl-N-hydroxysuccinimide ester as a conjugating agent, the synthetic peptide was conjugated to rabbit albumin and ${\gamma}$-globulin, tetanus and diphtheria toxoids, and keyhole limpet hemocyanin. Their conjugation yields were 8.3, 9.5, 15.8, 13.5, and 11.2%, respectively. 3. The natural HBsAg was purified from plasma of chronic HBsAg carrier. By the electron microscopic observation of the purified natural HBsAg preparation, no Dane particles were observed and the preparation showed negative DNA polymerase activity. 4. Antigenicity of the synthetic peptide and the plasma-derived natural HBsAg was determined by competition radioimmunoassay using $^{125}I$-natural HBsAg. Their 50% inhibitions appeared as $90{\mu}g/ml$ and $0.12{\mu}g/ml$ for the synthetic peptide and the natural HBsAg, respectively. This indicates that the former was about 750-fold less antigenic than the latter. 5. Immunogenicity of the synthetic peptide was determined by administering the peptide-carrier conjugates into rabbits with and without Freund's complete adjuvant. Regardless the carrier proteins and adjuvant, positive immune responses to the synthetic peptide were observed. The higher antibody titers, however, were shown in the groups administered with Freund's complete adjuvant. 6. Immunizing dose 50% in mice of the various peptide-carrier conjugates was 5.47, 6.00, 65.16, 31.25 and $13.03{\mu}g/dose$ for rabbit albumin and ${\gamma}$-globulin, tetanus and diphtheria toxoids, and keyhole limpet hemocyanin, respectively, while the natural HBsAg showed $0.65{\mu}g/dose$. 7. It was postulated that homologous proteins prefer to heterologous ones as the carriers.

• Journal of Photoscience
• /
• v.9 no.2
• /
• pp.353-355
• /
• 2002

We prepared 3-(1-hydroxyethyl)-bacteriopyrochlorophy11-a (3) possessing magnesium atom and phytyl ester from modification of natural bacteriochlorophyll(BChl)-a. A dichloromethane solution of (3$^1$R) and (3$^1$S)-3 was diluted with 100~1000 fold volume of cyclohexane to give new species absorbing near-infrared lights. The resulting Q, maximum of (3$^1$R)-3 was 860 nm and red-shifted by 2150 $cm^{-1}$ / from the monomeric. In the nonpolar organic solvent, epimeric (3$^1$S)-3 showed a 1ess red-shifted peak at 798 nm as well as a residual monomeric band. Such visible spectra indicated that 3 diastereose1ectively aggregated in cyclohexane to afford oligomers possessing a simi1ar supramolecular structure with chlorosomal aggregates of natural BChl-d, 7,8-dehydro-form of 3.

• Journal of Microbiology and Biotechnology
• /
• v.7 no.5
• /
• pp.333-340
• /
• 1997

An actinomycetes, KT-10 isolated from ginseng field in Kyongpook, Korea was selected based on its ability to produce a lysosomal cathepsin B inhibitor. The inhibitor purified from the culture supernatant of the isolate KT-10 showed strong inhibitory effects against cathepsin B as well as against papain when the activities were measured using synthetic substrate, ${\alpha}$-N-benzyloxycarbonyl-L-Iysine p-nitrophenyl ester (CLN) or ${\alpha}$-N-benzoyl-D,L-arginine 2-naphthylamide (BANA). The isolate KT-10 was identified as a species of Streptomyces based on its morphological characteristics and chemotaxonomic data. The TAXON program of Ward was used to identify Streptomyces sp. KT-10 as a strain of Streptomyces luteogriseus belong to cluster 18 of the genus Streptomyces with a Willcox probability 0.999388. The cathepsin B inhibitor was presumed to a novel material composed of a polyhydroxylamine.

• Membrane and Water Treatment
• /
• v.7 no.2
• /
• pp.143-154
• /
• 2016

Acetic acid can be removed from wastewater by esterification in a membrane reactor. Pervaporation membrane reactor (PVMR) is an alternative process to conventional separation processes. It is an environmentally friendly process. The main advantages of the PVMR are simultaneous water removal and production of an ester economically. In this study, the synthetic wastewater has been used. Esterification reaction of acetic acid with isopropanol has been studied in the presence of tungstosilicic acid hydrate as a catalyst in a batch reactor and in a PVMR. The effects of important operating parameters such as reaction temperature, initial molar ratio of isopropanol to acetic acid and catalyst concentration has been examined. Removal of acetic acid (conversion of acetic acid) was obtained as 85% using a PVMR by removal of water from the reaction mixture.