• Environmental Mutagens and Carcinogens
• /
• v.22 no.4
• /
• pp.215-222
• /
• 2002

The detection of many synthetic chemicals used in industry that may pose a genetic hazard in our environment is of great concern at present. Since these substances are not limited to the original products, and enter the environment, they have become widespread environmental pollutants, thus leading to a variety of chemicals that possibly threaten the public health. In this respect, to regulate and to evaluate the chemical hazard will be important to environment and human health. The clastogenicity of 17 synthetic chemicals was evaluated in Chinese hamster lung fibroblast cells in vitro. Two most cytotoxic chemicals, dodecyl methacrylate (CAS No. 142-90-5) and 2-ethylhexyl methacrylate (CAS No. 688-84-6), among 17 chemicals tested revealed no clastogenicity in the range of 0.0165-0.066 $\mu\textrm{g}$/$m\ell$ and 0.006-0.024 $\mu\textrm{g}$/$m\ell$ both in the presence and absence of metabolic activation system, respectively. All 17 chemicals revealed no significant induction of chromosomal aberration both in the presence and absence of metabolic activation system in this assay. From the results of chromosomal aberration assay with 17 synthetic chemicals in Chinese hamster lung cells in vitro, we did not observed positive clastogenic results in this study.

• Journal of Korean Society of Environmental Engineers
• /
• v.22 no.12
• /
• pp.2135-2139
• /
• 2000

The coagulation of anionic colloidal particles by the cyanoguanidine(CG)-formaldehyde resin has been reported to be caused by an electrostatic interaction of the diaminomethylene urea (DU) cation with an anionic surface charge of particles. In this research, 100~500 nm sized cationic cyanoguanidine-formaldehyde resin was synthesized to coagulate anionic dye wastewater, and the results showed that the less pH of aqueous cyanoguanidine-formaldehyde resin solution was, the higher Zeta potential of that was. In case of coagulating 0.4 g/L reactive dye by cyanoguanidine-formaldehyde resin at pH 3, 5, 7, 9, and 11, COD removal and the percent decolorization of synthetic dye wastewater at pH 3 are higher than those of other pH conditions. The COD removal and the percent decolorization of synthetic dye wastewater were 74% and 90% at 400 ppm, pH 3.

• Journal of The Korea Institute of Healthcare Architecture
• /
• v.13 no.3
• /
• pp.47-55
• /
• 2007

The theme of this study is holistic healing environment of children's library and it was researched on the basis of anthroposophy theory of Rudolf Steiner. According to Steiner's theory, human being consists of body, spirit, and soul. Especially, children are sensitive ones, and through synthetic function of 12 kinds of senses, they can be holistically healed (healing of body, spirit, and soul). As the sense independently functions or it is a element that cannot be described, it needs spatial plan to support synthetic function of it. We classified the healing space's meaning of children library by motion (including art and music), reading, & landscape healing activities and analyzed spatial characteristic to support each activity.

• Journal of Korean Society of Forest Science
• /
• v.108 no.1
• /
• pp.59-66
• /
• 2019

This study was conducted to evaluate the effect of the synthetic forest road network by calculating the optimal road density and layout of the forest road network in order to construct the systematic road network in the forested area. For this, five comparative routes were additionally planed and compared through evaluation indicators. As a result, the optimum road density of the study site was estimated to be 18.4 m/ha, and the synthetic forest road network was the best in the four indicators such as average skidding distance, standard deviation of skidding distance, development index, and circuity factor. In addition, the synthetic forest road network was comparable to the main road network by about 4 %p in the timber volume available and potential area size for logging, but the construction cost of the road was about 20 %p lower. It showed a synthetic forest road network was better in terms of economy.

• The Plant Pathology Journal
• /
• v.35 no.5
• /
• pp.417-424
• /
• 2019

Melanose, caused by Diaporthe citri, is one of severe diseases in citrus, a major economic resource in Jeju island. To reduce the usage amount of organic synthetic fungicide, bio-sulfur was tested as an alternative chemical to control citrus melanose in the present study. Direct antifungal activity of bio-sulfur against D. citri was determined through in vitro experiment using artificial nutrient media. Disease severity of melanose on bio-sulfur pretreated citrus leaves was lower than that on untreated ones. To illustrate the mechanism of disease suppression by bio-sulfur, infection structures were observed with a fluorescent microscope and a scanning electron microscope. In fluorescent microscopic observation, most conidia rarely germinated. In addition, hyphal growth on leaves pretreated with bio-sulfur was inhibited compared to that on untreated ones. In scanning electron microscope images of bio-sulfur pretreated leaves, surfaces of most conidia were shrunk while hyphae were morphologically changed and frequently branched. Such microscopic observations were also found for leaves pretreated with a commercial fungicide Dithianon. These results suggest that bio-sulfur may be used to control citrus melanose as an environment friendly alternative to organic synthetic fungicides

• Transactions of the Korean Society of Automotive Engineers
• /
• v.16 no.1
• /
• pp.14-21
• /
• 2008

Synthetic gas is defined as reformed gas from hydrocarbon-based fuel and the major chemical species of the synthetic gas are $H_2$, CO and $N_2$. Among them, hydrogen from synthetic gas is very useful species in chemical process such as combustion. It is a main reason that many studies have been performed to develop an effective reforming device. Furthermore, other technologies have been studied for synthetic gas application, such as the ESGI(Exhaust Synthetic Gas Injection) technology. ESGI injects and burns synthetic gas in the exhaust pipe so that heat from hydrogen combustion helps fast warmup of the close-coupled catalyst and reduction of harmful emissions. However, it is very hard to understand combustion characteristic of hydrogen under low oxygen environment and complicated variation in chemical species in exhaust gas. This study focuses on the characteristics of hydrogen combustion under ESGI operating conditions using a CVC(Constant Volume Chamber). Measurements of pressure variation and flame speed have been performed for various oxygen and hydrogen concentrations. Results have been analyzed to understand ignition and combustion characteristics of hydrogen under lower oxygen conditions. The CVC experiments showed that under lower oxygen concentration, amount of active chemicals in the combustion chamber was a crucial factor to influence hydrogen combustion as well as hydrogen/oxygen ratio. It is also found that increase in volume fraction of oxygen is effective for the fast and stable burning of hydrogen by virtue of increase in flame speed.

• The monthly packaging world
• /
• s.369
• /
• pp.87-89
• /
• 2024

• Membrane and Water Treatment
• /
• v.10 no.3
• /
• pp.239-244
• /
• 2019

Plating wastewater containing various heavy metals can be produced by several industries. Specifically, we focused on the removal of copper (Cu2+) and nickel (Ni+) ions from the plating wastewater because all these ions are strictly regulated when discharged into watershed in Korea. The application of both nanofiltration (NF) and reverse osmosis (RO) technologies for the treatment of wastewater containing copper and nickel ions to reduce fresh water consumption and environmental degradation was investigated. In this work, the removal of copper (Cu2+) and nickel (Ni+) ions from synthetic water was studied on pilot scale remove by before using two commercial nanofiltration (NF) and reverse osmosis(RO) spiral-wound membrane modules (NE2521-90 and RE2521-FEN by Toray Chemical). The influence of main operating parameters such as feed concentration on the heavy metals rejection and permeate flux of both membranes, was investigated. Synthetic plating wastewater samples containing copper ($Cu^{2+}$) and nickel ($Ni^{2+}$) ions at various concentrations(1, 20, 100, 400 mg/L) were prepared and subjected to treatment by NF and RO in the pilot plant. The results showed that NF, RO process, with 98% and 99% removal for copper and nickel, respectively, could achieve high removal efficiency of the heavy metals.

• Korean Journal of Remote Sensing
• /
• v.33 no.4
• /
• pp.377-390
• /
• 2017

Space-based Synthetic Aperture Radar (SAR) observations have been widely and successfully applied to acquire invaluable temporal and spatial information on wetlands, which are unique environments and regarded as important ecosystems. One of the best studied wetland area is Everglades, which is located in southern Florida, USA. As a World Heritage Site, the Everglades is the largest natural and subtropical wilderness in the United States. The Everglades wetlands have been threatened by anthropogenic activities such as urban expansion and agricultural development, as well as by natural processes, as sea level changes due to climate change. In order to conserve this unique wetland environment, various restoration plans have been implemented. In this review paper, we summarize the main studies using space-based SAR observations for monitoring the Everglades. The paper is composed of the following two sections: (1) review of backscattered amplitude analysis and observations, and (2) review of interferometric SAR (InSAR) analysis and applications. This study also provides an overview of a wetland InSAR technique and space-based SAR sensors. The goal of this review paper is to provide a comprehensive summary of space-based SAR monitoring of wetlands, using the Everglades wetlands as a case study.

• Corrosion Science and Technology
• /
• v.4 no.5
• /
• pp.178-190
• /
• 2005

In order to develop a new corrosion sensor for detecting and monitoring the external and internal corrosion damage of buried pipeline, the electrochemical property of sensors and the correlation of its output to corrosion rate of steel pipe, were evaluated by electrochemical methods in two soils of varying resistivity (5,000 ohm-cm, 10,000 ohm-cm) and synthetic tap water environments. In this paper, two types of galvanic probes were manufactured: copper-pipeline steel (Cu-CS) and stainless steel-pipeline steel (SS-CS). The corrosion behavior in synthetic groundwater and synthetic tap water for the different electrodes was investigated by potentiodynamic test. The comparison of the sensor output and corrosion rates revealed that a linear relationship was found between the probe current and the corrosion rates. In the soil resistivity of $5,000{\Omega}-cm$ and tap water environments, only the Cu-CS probe had a good linear quantitative relationship between the sensor output current and the corrosion rate of pipeline steel. In the case of $10,000{\Omega}-cm$, although the SS-CS probe showed a better linear correlation than that of Cu-CS probe, the Cu-CS probe is more suitable than SS-CS probe due to the high current output.