• 한국수산과학회지
• /
• 제56권1호
• /
• pp.116-123
• /
• 2023

Flow-through aquaculture systems generate large amounts of wastewater containing compounds such as solids that can settle near aquafarms and cause eutrophication. The settled solids are often reintroduced into flow-through systems, and aquatic animals can be affected by the solids and pathogens associated with these solids. For a sustainable aquaculture operation, adequate wastewater treatment is required. Hydrocyclones are one of the most promising technologies for the removal of solids in aquaculture wastewater. In this study, a model for performance prediction of hydrocyclones was investigated under three different operating conditions: water temperature, solids concentration, and water inlet velocity. The synthetic solids solution was prepared using settled solids from abalone aquaculture farms. The daily solids removal rates of the tested hydrocyclones ranged from 0.18 to 26.0 g solids-m^-3-day^-1, and removal efficiency ranged from 5.1 to 34.4%. The inlet water velocity had the greatest effect on solids removal and hydrocyclone efficiencies. The following multiregression model equation was derived from the daily solids removal rate (g solids-m^-3-day^-1) results for water temperature (T, ℃), solids concentration (SS, mg-L^-1), and tangential inlet water velocity (TIV, m-sec^-1): daily solids removal rate: f(z)=4.465+0.809TIV-0.375T+0.217SS (r²=0.976).

• 대한원격탐사학회지
• /
• 제26권5호
• /
• pp.497-510
• /
• 2010

이 연구에서는 토양의 유전상수 (dielectric constant) 표면의 거칠기 (surface roughness)와 지표면의 기하 (geometric) 등과 같은 다양한 물리적 요소들의 정보를 포함하고 있는 SAR (Synthetic Aperture Radar) 자료를 이용하여 강화도 갯벌의 표층 퇴적환경을 분석하였다. JERS-1, ENVISAT과 ALOS 위성의 다양한 SAR 자료로부터 레이더 후방산란계수 (backscattering coefficient)를 추출하여 각 퇴적환경 요소들과의 관계를 파악하고 시간변화에 따른 지표의 변화 정도를 알 수 있는 긴밀도 (coherence)를 추출하여 퇴적상과 비교하였다. SAR 영상으로부터 추출한 후방산란계수와 긴밀도를 이용한 강화도 갯벌 퇴적환경 특성을 분석한 결과 높은 긴밀도를 갖는 지역은 입도가 작은 펄이 많이 포함된 펄 퇴적상이며 긴밀도가 낮을수록 큰 입도가 많이 분포하는 지역임을 알 수 있었다. 강화도 갯벌은 다른 갯벌과는 달리 조류로가 많이 발달하여 썰물 시 수분함유량에 많은 영향을 주어 모래 퇴적상과 혼합 퇴적상은 갯벌의 노출시간이 증가함에 따라 토양 수분함유량이 감소하여 후방산란계수가 점차 감소한다. 그러나 펄 퇴적상에서는 지형 고도가 높아 해수의 많은 영향을 받지 않으며 조류로의 밀도가 높기 때문에 토양 수분함유량이 감소하지만 후방산란계수가 높게 나타났다. 또한 갯벌은 토양 수분함유량뿐만 아니라 표면에 남아있는 잔존수도 많아 강우량이 많은 날은 지표 잔존수가 증가하기 때문에 비교적 후방산란계수가 낮게 나타나는 경향을 보였다. 이 연구의 결과, 긴밀도, 후방산란계수와 각 퇴적환경 요소들의 상관관계를 알 수 있었으며, 향후 강화도 갯벌 퇴적환경의 공간적 분석을 위해 각각의 요소들이 미치는 영향에 대한 정량적인 연구가 필요할 것으로 판단된다.

• 한국해양학회지
• /
• 제30권4호
• /
• pp.341-354
• /
• 1995

동해의 8개 정점에서 해수 및 추출된 용존 유기물의 형광특성과 아미노산 조성이 연구되었다. C-18 Sep-Pak cartridge에 의해 추출된 시료는 3차원 형광특성 분석에 따 라 생거대물질과 지구거대물질로 구분되었다. 전 조사 정점을 통하여 생거대물질(ex : 280 nm/em : 330 nm)은 표층이 높고 수온약층 아래에서 점차 감소하는 것으로 나타났 으며 이는 표층혼합층의 생물 활동에서 기인된 분해가능한 생거대물질이 수온약층 부 근 및 저층에서 활발한 미생물 분해과정에 의해 감소하는 것으로 사료된다. 한편 이와 는 역상관계를 보이는 지구거대물질 (ex : 330 nm/em : 430 nm)은 표층은 낮고 수온약 층 아래에서 증가하였는데 이는 표층에서 생성된 생거대물질 및 입자유기체가 생물 분 해 후 재축합 과정을 거쳐 난분해성의 지구거대물질로 전환된 것으로 사료된다. HPLC 를 이용하여 해수와 추출된 유존유기물의 아미노산 조성을 분석하였다. 분석결과 Glycine, serine 그리고 alanine등이 우점하였으며, 전체 농도의 50% 이상을 차지하는 것으로 조사되었다. 해수중의 용존 자유아미노산 농도는 표층이 0.7∼1.8um 범위로 저 층 0.2∼0.4um보다 높게 측정되었다. 추출된 유기물중 alanine의 D/L racemice ratio 측정결과 저층보다 표층이 상대적으로 낮은 값을 보였으며 이는 표층의 생거대물질이 연령이 젊고 재순환이 빠르며 생물 분해가능성이 큰 물질임을 시사하고 있다.

• 상하수도학회지
• /
• 제30권3호
• /
• pp.343-350
• /
• 2016

Membrane distillation (MD) is a novel separation process that have drawn attention as an affordable alternative to conventional desalination processes. However, membrane fouling and pore wetting are issues to be addressed prior to widespread application of MD. In this study, the influence of ultrasonic irradiation on fouling and wetting of MD membranes was investigated for better understanding of the MD process. Experiments were carried out using a direct contact membrane distillation apparatus Colloidal silica was used as a model foulants in a synthetic seawater (35,000 mg/L NaCl solution). A vibrator was directed attached to membrane module to generate ultrasonic waves from 25 kHz (the highest energy) to 75 kHz (the lowest energy). Flux and TDS for the distillate water were continuously monitored. Results suggested that ultrasonic irradiation is effective to retard flux decline due to fouling only in the early stage of the MD operation. Moreover, wetting occurred by a long-term application of ultrasonic rradiation at 75 kHz. These results suggest that the conditions for ultrasonic irradiation should be carefully optimized to maximize fouling control and minimize pore wetting.

• 태양에너지
• /
• 제18권4호
• /
• pp.1-10
• /
• 1998

Polymer induced turbulent drag reduction in a rotating disk apparatus was investigated using four different molecular weights of poly(ethylene oxide)(PEO) in a synthetic seawater solution for the purpose of potential application to the cold water piping in the Ocean Thermal Energy Conversion(OTEC) system. To apply drag reduction to the OTEC we measured the temperature dependence on the drag reduction efficiency. From this study, it was found that the drag reduction efficiency increases with the temperature and the concentration. To measure the drag reduction efficiency during the operation period, the drag reduction behavior was detected as a function of time and the results obtained from the experiment was compared to the Brostow's model equation.

• 한국진공학회:학술대회논문집
• /
• 한국진공학회 2009년도 제38회 동계학술대회 초록집
• /
• pp.47-47
• /
• 2010

Discharge under the water is very hard and demand considerable high voltage. But specially improved electrode can generate plasma discharge to salty water with relatively low voltage. A round shape ceramic electrode having many pinholes combined with metallic one can generate plasma. 400 volt, 10 kHz and 3 micro second pulse width were applied to repeatedly running synthetic seawater with 10 L/m velocity, containing cultivated E. coli and Bacillus. As a result, 18, 94, 99.97, 100, 100 % disinfection rates to E. coli and 17.1, 17.1, 82.9, 99.4, 99.9 % disinfection rates to Bacillus subtilis were achieved to 1, 2, 3, 4, 5 times repetitive treatment respectively. In the plasma condition, the ions and electrons are separated and new kinds of components are re-synthesized by the intensive movement of the components. Especially chlorine ions are separated and recombined to residual free chlorine like HOCl, $OCl^-$. The residual free chlorine concentrations of discharged water were 0.25, 0.88, 1.39, 1.59, 1.66 mg $Cl_2$/L after 5 times treatment respectively. Another unconfirmed radical and oxidants for example, OH, $H_2O_2$, and $O_3$ can have an effect on microorganism of course.

• 대한환경공학회지
• /
• 제36권6호
• /
• pp.387-395
• /
• 2014

본 연구에서는 SBSE 전처리 장치와 GC-MS/MS를 이용하여 합성 향물질 11종을 동시 분석할 수 있는 분석법을 개발하기 위해 흡착 bar의 교반시간, 교반속도, 시료수의 pH, 시료수 용량, 염석제 투입량 및 메탄올 주입량 변화 등 SBSE (stir bar sorptive extraction) 전처리 조건과 GC-MS/MS (gas chromatography/tandem mass spectrometry)의 기기조건을 다양하게 변화시켜 SBSE-GC-MS/MS를 이용한 분석법을 개발하였다. 11종의 합성 향물질들에 대한 검출한계(LOD)는 2.1~4.1 ng/L였으며, 정량한계(LOQ)는 6.6~12.9 ng/L였다. 수돗물, 낙동강 원수, 하수처리장 최종방류수 및 해수를 이용하여 시료수의 matrix 영향을 살펴본 결과, 11종의 합성 향물질들의 회수율 및 RSD의 경우 각각 88%~119% 및 0.8%~7.5%로 양호한 결과를 나타내어 시료수의 matrix 영향을 받지 않는 것으로 나타났다. 본 연구에서 개발된 SBSE-GC-MS/MS 분석법은 40 mL 정도의 적은 시료수량으로도 고감도 분석이 가능하며, 용매류를 사용하지 않기 때문에 분석자의 건강 및 환경친화적인 분석법이라는 장점뿐만 아니라 간편하고, 빠르며 자동화된 방법이라는 장점을 가진다.

• 한국환경농학회지
• /
• 제19권5호
• /
• pp.401-418
• /
• 2000

1. Production of the artificial zeolite from coal ash Coal fly ash is mainly composed of several oxides including $SiO_2$ and $Al_2O_3$ derived from inorganic compounds remained after burning. As minor components, $Fe_2O_3$ and oxides of Mg, Ca, P, Ti (trace) are also contained in the ash. These components are presented as glass form resulting from fusion in the process of the combustion of coal. In other word, coal ash may refer to a kind of aluminosilicate glass that is known to easily change to zeolite-like materials by hydrothermal reaction. Lots of hot seawater is disposing near thermal power plants after cooling turbine generator periodically. Using seawater in the hydrothermal reaction caused to produce low price artificial zeolite by reduction of sodium hydroxide consumption, heating energy and water cost. As coal ash were reacted hydrothermally, peaks of quartz and mullite in the ash were weakened and disappeared, and new Na-Pl peaks were appeared strengthily. Si-O-Si bonding of the bituminous coal ash was changed to Si-O-Al (and $Fe^{3+}$) bonding by the reaction. Therefore the produced Na-Pl type zeolite had high CEC of 276.7 $cmol^+{\cdot}kg^{-1}$ and well developed molecular sieve structure with low concentration of heavy metals. 2. Utilization of the artificial zeolite in agro-environment The artificial zeolite(1g) could remove 123.5 mg of zinc, 164.7 mg copper, 184.4 mg cadmium and 350.6 mg lead in the synthetic wastewater. The removability is higher 2.8 times in zinc, 3.3 times in copper, 4.7 times in cadmium and 4.8 times in lead than natural zeolite and charcoal powder. When the heavy metals were treated at the ratio of 150 $kg{\cdot}ha^{-1}$ to the rice plant, various growth inhibition were observed; brownish discoloration and death of leaf sheath, growth inhibition in culm length, number of panicles and grains, grain ripening and rice yield. But these growth inhibition was greatly alleviated by the application of artificial zeolite, therefore, rice yield increased $1.1{\sim}3.2$ times according to the metal kind. In addition, the concentration of heavy metals in the brown rice also lowered by $27{\sim}75%$. Artificial Granular Zeolites (AGZ) was developed for the purification of wastewater. Canon exchange capacity was 126.8 $cmol^+{\cdot}kg^{-1}$. AGZ had Na-Pl peaks mainly with some minor $C_3S$ peaks in X-ray diffractogram. In addition, AGZs had various pore structure that may be adhere the suspended solid and offer microbiological niche to decompose organic pollutants. AGZ could remove ammonium, orthophosphate and heavy metals simultaneously. Mixing ratio of artificial zeolite in AGZs was related positively with removal efficiency of $NH_4\;^+$ and negatively with that of $PO_4\;^{3-}$. Root growth of rice seedling was inhibited severely in the mine wastewater because of strong acidity and high concentration of heavy metals. As AGZ(1 kg) stayed in the wastewater(100L) for 4days, water quality turned into safely for agricultural usage and rice seedlings grew normally.

• 자원환경지질
• /
• 제42권3호
• /
• pp.217-234
• /
• 2009

본 연구에서는 부산광역시 기장군 일광면 일대 농업지역의 지하수 수질과 농약에 의한 오염 특성을 요인분석을 이용하여 규명하였다. 1, 2, 3차의 수질분석에 의하면, 무기성분($Ca^{2+}$, $Na^+$, $Mg^{2+}$, $K^+$, $Zn^{2+}$, $Cu^{2+}$, $Fe^{2+}$, $Al^{3+}$, $NO_3\;^-$, $Cl^-$, $SO_4\;^{2-}$, $F^-$, $SiO_2$)의 평균농도는 2차조사에서 대체로 높게 나타났으며, 살충제인 carbofuran과 제초제 alachlor는 2차조사에서 과반수가 넘는 지하수공에서 검출이 되었다. 이는 강수량의 증가로 인해서 지하수내로 오염물질의 용출량이 늘어났기 때문으로 판단된다. 요인분석과 수질조성에 의하면, $SiO_2$, $HCO_3\;^-$, $F^-$을 제외한 무기성분들은 인위적인 오염(화학비료, 퇴비, 유기물의 분해, 축산폐수, 생활하수), 염수, 물-광물 반응의 영향을 받고 있다. 인위적인 오염을 대표하는 $NO_3\;^-$평균농도는 먹는물 기준보다 약 4${\sim}$5배 초과하고 있다. 또한, 염수의 영향은 해안에서부터 멀수록 작아지는 것으로 판단된다.

• 한국분말재료학회지
• /
• 제30권4호
• /
• pp.324-331
• /
• 2023

Lithium (Li) is a key resource driving the rapid growth of the electric vehicle industry globally, with demand and prices continually on the rise. To address the limited reserves of major lithium sources such as rock and brine, research is underway on seawater Li extraction using electrodialysis and Li-ion selective membranes. Lithium lanthanum titanate (LLTO), an oxide solid electrolyte for all-solid-state batteries, is a promising Li-ion selective membrane. An important factor in enhancing its performance is employing the powder synthesis process. In this study, the LLTO powder is prepared using two synthesis methods: sol-gel reaction (SGR) and solid-state reaction (SSR). Additionally, the powder size and uniformity are compared, which are indices related to membrane performance. X-ray diffraction and scanning electron microscopy are employed for determining characterization, with crystallite size analysis through the full width at half maximum parameter for the powders prepared using the two synthetic methods. The findings reveal that the powder SGR-synthesized powder exhibits smaller and more uniform characteristics (0.68 times smaller crystal size) than its SSR counterpart. This discovery lays the groundwork for optimizing the powder manufacturing process of LLTO membranes, making them more suitable for various applications, including manufacturing high-performance membranes or mass production of membranes.