• Ocean Systems Engineering
• /
• 제4권4호
• /
• pp.309-325
• /
• 2014

Geotextile tubes are basically a huge sack filled with sand or dredged soil. Geotextile tubes are made of permeable woven or non-woven synthetic fibers (i.e., polyester or PET and polypropylene or PP). The geotextile tubes' performances in strength, dewatering, retaining solid particles and stacked stability have been studied extensively in the past. However, only little research has been done in the observation of the deformation behavior of geotextile tubes. In this paper, a large-scale apparatus for geotextile tube experiment is introduced. The apparatus is equipped with a slurry mixing station, pumping and delivery station, an observation station and a data station. For this study the large-scale apparatus was utilized in the studies regarding the stresses on the geotextile and the deformation behavior of the geotextile tube. Model tests were conducted using a custom-made woven geotextile tubes. Load cells placed at the inner belly of the geotextile tube to monitor the total soil pressure. Strain gauges were also placed on the outer skin of the tube to measure the geotextile strain. The pressure and strain sensors are attached to a data logger that sends the collected data to a desktop computer. The experiment results showed that the maximum geotextile strain occurs at the sides of the tube and the soil pressure distribution varies at each geotextile tube section.

• 한국염색가공학회지
• /
• 제13권5호
• /
• pp.18-18
• /
• 2001

Natural colorants have attracted much attention all over the world because of their non-hazardous nature. The world is becoming increasingly aware of environmental issues, such as ozone layer depletion, water pollution and waste disposal problems. The use of synthetic dyestuffs for their synthesis and application in the dyeing industries has been criticized due to introduction of contaminants into the environment. This has led to the desire to turn to the traditional, and more natural way of life. In this study, the colorants of extract of Ginkgo biloba bark were analysed and their dyeing properties on silk, wool and cotton were studied. It was found that uv-visible absorption spectra of extract of Ginkgo biloba bark showed two strong absorption peaks in the range of 240∼400 nm. From the result of IR spectra, the major ingredient of extract of Ginkgo biloba bark seems to be the flavon which is one of the flavonoid derivatives. Silk, wool, and cotton dyed with the extract of Ginkgo biloba bark showed a reddish yellow color. Their color differences were increased drastically with repetition of dyeing by three times.

• 한국펄프종이공학회:학술대회논문집
• /
• 한국펄프종이공학회 2006년도 춘계학술발표논문집
• /
• pp.167-173
• /
• 2006

Deinking is a series of unit operations designed to detach ink from cellulose fibers and separate the dispersed ink from the pulp slurry. Deinking chemicals are process aids that enable expensive mill equipment used in these unit operations to operate more efficiently - often much more efficiently. We propose the blended deinking agent with cellulolutic enzymes and synthetic collector in deinking pulp of conventional alkaline method. The deinking efficiency of old news print in alkaline pH was enhanced with enzyme treatments. The brightness of deinked pulp was increased with less residual ink particles and yield of enzymatic deinked pulp was improved compared to the deinked pulp of conventional alkaline method. Enzymes in biomass were use to Chemical Deinking for reduce environment pollution through surfactant and improve surfactants. examining into compatibility Enzymes and surfactants, these new materials are studied efficiency of deinking efficiency.

• 펄프종이기술
• /
• 제46권1호
• /
• pp.29-38
• /
• 2014

Guar gum is added to the pulp suspension at the suction side of the fan pump just before the sheet is formed on either a fourdrinier or cylinder machine. Guar gum replaced and supplements these hemicelluloses in paper bonding with many advantages, which include improved sheet formation with a more random distribution of pulp fibers. But, guar gum has serious storage problem. This material has easily decayed after High-temperature conditions such as summer. In this study, various properties of cotton handsheet were measured to solve the problem of deformation while storing guar gum and to improve the durability. After aging, which is one of the durability tests, cotton handsheet with 0.2% and 0.3% of A-PAM showed improved mechanical properties and bursting index and folding endurance of cotton handsheet with 0.3% of A-PAM were similar to those with guar gum. The yellowness loss of cotton handsheet with synthetic polymers was lower than those with guar gum.

• 한국의상디자인학회지
• /
• 제6권2호
• /
• pp.89-102
• /
• 2004

Modern society is age of sports just as health and leisure became dominant concern, which has caused the fixation and development to sports wear considered as fashion for everyday dress. This paper focused on the development process and aesthetic characteristics of knit design expressed in the 20th century sports wear. The importance and direction of knit design in modern sports wear is expected. Style, items, fabrics, colors, details and top designers were analyzed in sports wear from the 1910' s to 1990' s. Sports wear can be categorized into two of the active sports wear and spectator sports wear. Since disappearance of division between ordinary wear and sports fashion in the 1970' s, the functional wear of leggings, cycle shorts, exercise clothes, leotard, and leg warmer appeared. Vicennial developments of synthetic fibers and new fabrics have caused the great changes in knit design. Colors were vivid in the 1950' s, metallic in the 1970' s and neon in the 1990' s. Sportive sense was expressed by various details. The dominant knit designers who expressed aesthetic characteristics to sports wear were Coco Chanel, Claire McCardell, Balenciaga, Andre Courrege, Pierre Cardin, Yves Saint-Laurent, Ralph Lauren, Donna Karan, and Giogio Armani.

• Journal of the Korean Wood Science and Technology
• /
• 제24권3호
• /
• pp.101-109
• /
• 1996

Effects of process variables were evaluated in physical properties of the wood fiber-thermoplastic fiber composites using nonwoven web method. Turbulent air mixer using compressed air was employed to mix wood fiber with two types of thermoplastic polypropylene and nylon 6 fibers. The optimal hot press temperature and time were found to be $190^{\circ}C$ and 9 minutes in wood fiber-polypropylene fiber composite and to be $220^{\circ}C$ and 9 minutes in wood fiber-nylon 6 fiber composite. As the density of wood fiber-polypropylene fiber composite and wood fiber-nylon 6 fiber composite increased, the physical properties were improved The density appeared to be the most significant factor on physical properties in the statistical analysis. The composition ratio of polypropylene or nylon 6 fiber to wood fiber was considered not to be statistically significant factor. The thickness swelling decreased somewhat in wood fiber-polypropylene fiber composite and wood fiber-nylon 6 fiber composite as the content of synthetic fiber increased. As the increase of mat moisture content, dimensional stability was improved in wood fiber-polypropylene fiber composite but not in wood fiber-nylon 6 fiber composite.

• 공업화학
• /
• 제4권2호
• /
• pp.240-253
• /
• 1993

실리콘알콕사이드는 실리카섬유와 박막재료 및 각종 세라믹스의 합성원료로써 필수적인 물질이 되었으며, 최근에는 16MD램 이상의 초고도 전자제품의 VLSI용 박막 원료로 각광을 받게 되면서 그 중요성이 더한층 강조되고 있다. 따라서 본 본문에서는 실리콘알콕사이드의 각종 합성방법과 반응기구 및 응용분야 등을 요약 정리하고, 실리콘알콕사이드 합성에 관한 본 연구팀의 연구결과 및 문제점을 간략하게 소개하였다.

• 패션비즈니스
• /
• 제15권5호
• /
• pp.103-114
• /
• 2011

During a wearer's movement, the apparel fabric layers collide each other in a highly complicated manner. The collision involves cloth-cloth, and cloth-body collision. The diversity of the textile fabrics, including silk, wool, cotton, and other synthetic fibers, together with the complex details of the apparel construction, makes the collision and other calculation procedure involved in the 3-dimensional clothing software system much more complicated. Therefore, there is a need to measure the behavior of the fabrics during the fabric collision cycles. In this study, as a first step, static measurements pertinent to the factors governing the appearance of the apparel fabrics were implemented. The drape profile, stiffness(Sd and Sf), tensile properties, thickness, and the air permeability were measured. The correlation between the parameters were calculated and reviewed. It is found that there is a high correlation of 0.97 between the actual fabric drape parameters and the 3D virtual fabric drape parameters. The measured drape coefficients of the fabrics show relatively good correlation with the measured fabric stiffness.

• 대한가정학회지
• /
• 제23권2호
• /
• pp.21-28
• /
• 1985

This study is to furnish basic data for making appropriate and comfortable pillow. This research was carried out in reference to 260 males and 339 females whose ages are above 20 in Daegu, from Aug. 1. 1984 to Oct. 15. 1984. RESULTS : 1. In the shape of pillow, the western style is more used than Korean style. 2. The mean size, 50.9$\times$29.1 cm, of pillows is too small for the preceding studies of which, the most comfortable size is 65$\times$45 cm. 3. The mean height, 10.1 cm, of pillows is much higher than the appropriate height, 5.0$\pm$1cm, in the preceding studies. 4. The mean weight, 1587g, of pillows seems to be too heavy. 5. The most used stuffing of pillows is fascicular fibers, the second chaff, the third husks of buckweat, the fourth sponge, and then feather, 6. Considering of pillow-slip material, 68.8% of pillows consist o synthetic fiber.7. The mean compression rate 14.5% is much lower than the comfortable compression rate 40~50 in the preceding studies. 8. Considering the way obtainment, ready-made articles are more used than the domestic-made articles. 9. The same pillows are used throughout for seasons, and that seems not to be appropriate because climate is changeable according to seasons in our country. 10. The sterilization by sunlight is rarely carried out and that is unhygienic because pillows used to absord much of sweat during using time.

• 한국의류산업학회지
• /
• 제22권4호
• /
• pp.515-522
• /
• 2020

This study examined the effect of the blend ratio of wool and polyester fibers, yarn and fabric structural parameters to the appearance property and the formability of worsted fabrics. The mechanical properties of twenty types of manufactured worsted and PET/wool blend fabrics were measured using KES-FB and FAST systems. Garment formability increases with the thickness and cover factor as well as increases with wool content. The correlation between KES-FB and FAST system showed a relatively high correlation with an extensibility of 0.98, bending and shear rigidity 0.71; both were higher than polyester synthetic fiber. The correlation coefficient of garment formability between KES-FB and FAST systems was 0.93 and the correlation coefficient between formability and fabric extensibility was 0.8. These results were higher than those of bending and shear rigidity. This revealed that garment formability was influenced by wool content, cover factor and fabric thickness; however, wool content and fabric thickness were the most important factors for the seam pucker. The garment formability of the worsted fabrics can be predicted by fabric mechanical properties measured from KES-FB and FAST systems.