• 제어로봇시스템학회:학술대회논문집
• /
• 2003.10a
• /
• pp.413-418
• /
• 2003

In this paper, a new multirate optimal finite impulse response (FIR) filter is proposed for the signal reconstruction in the nosy filter bank systems. The multirate optimal FIR filter replaces the conventional synthesis filters and the Kalman synthesis filter. First, the generic linear model is derived from the multirate state space model for an autoregressive (AR)input signal. Second, the multirate optimal FIR filter is derived from the multirate generic linear model using the minimum variance criterion. This paper also provides numerical examples and results. The simulation results illustrate that the performance is improved compared with conventional synthesis filters and the proposed filter has advantages over the Kalman synthesis filter.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.21 no.11
• /
• pp.1259-1268
• /
• 2010

In this paper, we presented a new LC prototype synthesis method for the multi-band filter. For synthesis a multi-band filter with the required frequency response, we proposed the diagram of poles and zeros, also, we proposed the optimization process for finding the combination of optimized poles and zeros. From the transfer and reflection functions calculated from poles and zeros, we performed the quasi-elliptic LC prototype synthesis of multi-band filter. Using the proposed LC prototype synthesis method of multi-band filter, dual-band filter operating at GSM(880~960 MHz) and ISM(2,400~2,500 MHz) and triple-band filter operating at GSM(880~960 MHz) and ISM(2,400~2,500, 5,725~5,850 MHz) were designed and fabricated.

• Proceedings of the IEEK Conference
• /
• 2002.07c
• /
• pp.1863-1866
• /
• 2002

This paper describes synthesis of a complex R$^{i}$ CR filter with a finite transmission zero except zero frequency. First, a new kernel function is proposed. Secondly, how to determine the element values included in the R$^{i}$ CR filter is described. A fifth-order R$^{i}$ CR filter is designed. Finally, the sensitivity property of the proposed filter is evaluated through computer simulation.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.16 no.1 s.92
• /
• pp.19-25
• /
• 2005

This paper describes a synthesis method for a self-equalized dual-passband filter. Compared to conventional dual-passband filter, a self-equalized dual-passband filter can reduce BER(bit error rate) in digital data communications and does not need an external equalizer for group-delay equalization. To validate the synthesis technique, a 10-pole dual-mode dual-passband filter which has two self-equalized 5-pole elliptic response passband is synthesized.

• Proceedings of the Korea Institute of Convergence Signal Processing
• /
• 2003.06a
• /
• pp.296-299
• /
• 2003

This paper shows a novel and simple IIR/FIR QMF(quadrature mirror filter) filter banks, mixed IIR and FIR structure. Here, FIR filters used for phase compensation. In this paper, we introduced analysis and synthesis filter banks, which used FIR linear phase filters and all pass filters. In result, phase response of analysis and synthesis filter banks become approximately linear characteristic. Simultaneously, a liasing distortion can be completely canceled.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.21 no.3
• /
• pp.612-621
• /
• 1996

In this paper, we propose the low sidelobe digital FIR doppler filter bank synthesis algorithm through the Gradient Descent method and it can be practially appliable to coherent pulse doppler radar signal processing. This algorithm shows the appropriate calculation of tap coefficients or zeros for FIR transversal fiter which has been employed in radar signal processor. The span of the filters in the filter bank be selected at the desired position the designer want to locate, and the lower sidelobe level that has equal ripple property is achieved than one for which the conventional weithtedwindow is used. Especially, when we implemented filter zeros as design parameters it is possible to make null filter gain at zero frequency intensionally that would be very efficient for the eliminatio of ground clutter. For the example of 10 tap filter synthesis, when filter coefficients or zeros are selected as design parameters the corresponding sidelobelevel is reducedto -70db or -100db respectively and it has good convergent characteristics to the desired sidelobe reference value. The accuracy ofapproach to the reference value and the speed of convergence that show the performance measure of this algorithm are tuned out with some superiority and the fact that the bandwidth of filter appears small with respect to one which is made by conventional weighted window method is convinced. Since the filter which is synthesized by this algorithm can remove the clutter without loss of target signal it strongly contributes performance improvement with which detection capability would be concerned.

• Journal of the Korean institute of surface engineering
• /
• v.29 no.1
• /
• pp.45-59
• /
• 1996

Ultrafine powders(UFPs) of aluminum nitride(AlN) have been synthesized by chemical reactions in the nitrogen atmosphere and the gaseous aluminum evaporated from Al powders in thermal plasmas produced by a DC plasma torch. A synthesis system consisting of a plasma torch, a finely-controllable powder feeder, a reaction chamber, and a quenching-collection chamber have been designed and manufactured, and a filter for gathering AlN UFPs produced by the quenching process subsequent to the synthesis is set up. The synthesis process is interpreted by numerical analyses of the plasma-particle interaction and the chemical equilibrium state, respectively, and a fully-saturated fractional factorial test is used to find the optimum process conditions. The degrees and ultrafineness of synthesis are evaluated by means of SEM, TEM, XRD, and ESCA analyses. AlN UFPs synthesized in the optimum process conditions have polygonal shapes of the size of 5-100 nm, and their purities differ depending on collecting positions and filter types, and the maximum purity obtained is 72 wt% at the filter.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.21 no.6
• /
• pp.1430-1437
• /
• 1996

A low delay code excited linear predictive speech coder(LD-CELP) at bit rates under 8kbps is considered. We try to improve the perfomance of speech coder with frame type dependent modification of synthesis filter. We first classify frames into 3 groups: voiced, unvoiced and onset. For voicedand unvoiced frame, the spectral envelope of the synthesis filter is adapted to the phonetic characteristics. For transition frame from unvoiced to voiced, the synthesis filter which has been interpolated with the bias filter is used. The proposed vocoder produced more clear sound with similar delay level than other pre-existing LD-CELP vocoders.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.14 no.5
• /
• pp.506-512
• /
• 2003

An output multiplexer of manifold type is widely used in a recent satellite transponder f3r its mass and volume reduction. For correct operation, the filter of such a multiplexer must be singly terminated. In this paper, a simple synthesis method of a 6-pole dual-mode singly terminated filter is described. From the transfer function of the filter, network parameters such as in/output terminations and coupling matrix are obtained with the aid of orthogonal projection and plane rotation. The rotation order, pivot, and rotation angle of the plane rotation process are given for easy filter synthesis. Two different-structure filters are taken into consideration and the network parameters of each filter have been obtained from the same transfer function. The method described in this paper can be applied to the other degree singly terminated filter.

• Journal of the Korean Institute of Telematics and Electronics
• /
• v.4 no.1
• /
• pp.13-21
• /
• 1967

A low pass filter is synthesized with R, C and negative impedance converters(NIC). The filter has a 4-th order elliptic function, which gives best magnitude approximation with equi-ripple characteristics both in pass and stop band. And experimental investigations have been made on the effect of the anticipated deviation of the NIC conversion factor and of possible loaded operation. Through the study, it has been cocluded that: 1. For minimum pole-zero sensitivity with respect to the NIC conversion factor, the network of a parallel RC-NIC configuration is preferable and the Horowitz polynomial decomposition method is applied in the synthesis procedure. 2. A few percentage variation of the NIC conversion factor changes the frequency and amplitude characteristics of the filter by nearly negligible amount. 3. With a load resistance below the critical value, the filter turns into an oscillator.