• Smart Structures and Systems
• /
• v.18 no.5
• /
• pp.885-909
• /
• 2016

Advances in low-cost wireless sensing have made instrumentation of large civil infrastructure systems with dense arrays of wireless sensors possible. A critical issue with regard to effective use of the information harvested from these sensors is synchronized sensing. Although a number of synchronization methods have been developed, most provide only clock synchronization. Synchronized sensing requires not only clock synchronization among wireless nodes, but also synchronization of the data. Existing synchronization protocols are generally limited to networks of modest size in which all sensor nodes are within a limited distance from a central base station. The scale of civil infrastructure is often too large to be covered by a single wireless sensor network. Multiple independent networks have been installed, and post-facto synchronization schemes have been developed and applied with some success. In this paper, we present a new approach to achieving synchronized sensing among multiple networks using the Pulse-Per-Second signals from low-cost GPS receivers. The method is implemented and verified on the Imote2 sensor platform using TinyOS to achieve $50{\mu}s$ synchronization accuracy of the measured data for multiple networks. These results demonstrate that the proposed approach is highly-scalable, realizing precise synchronized sensing that is necessary for effective structural health monitoring.

• International Journal of Internet, Broadcasting and Communication
• /
• v.11 no.3
• /
• pp.106-110
• /
• 2019

The interaural level difference (ILD) used for the sound localization using stereo signals is to find the difference in energy that the sound source reaches both ears. The conventional ILD does not consider the time difference of the stereo signals, which is a factor of lowering the accuracy. In this paper, we propose a synchronized ILD that obtains the ILD after synchronizing these time differences. This method uses the cross-correlation function (CCF) to calculate the time difference to reach both ears and use it to obtain synchronized ILD. In order to prove the performance of the proposed method, we conducted two sound localization experiments. In each experiment, the synchronized ILD and CCF or only the synchronized ILD were given as inputs of the deep neural networks (DNN), respectively. In this paper, we evaluate the performance of sound localization with mean error and accuracy of sound localization. Experimental results show that the proposed method has better performance than the conventional methods.

• Journal of Broadcast Engineering
• /
• v.13 no.6
• /
• pp.930-940
• /
• 2008

This paper proposes a prototype realization of multi-view HD video transport system with synchronized multiplexing over IP networks. The proposed synchronized multiplexing considers the synchronization during video acquisition and the multiplexing for the interactive view-selection during transport. For the synchronized acquisition from multiple HDV camcorders through IEEE 1394 interface, we estimate the timeline differences among MPEG-2 compressed video streams by using global time of network between the cameras and a server and correct timelines of video streams by changing the time stamp of the MPEG-2 system stream. Also, we multiplex a selected number of acquired HD views at the MPEG-2 TS (transport stream) level for the interactive view-selection during transport. Thus, with the proposed synchronized multiplexing scheme, we can display synchronized HD view.

• Journal of information and communication convergence engineering
• /
• v.8 no.3
• /
• pp.277-280
• /
• 2010

We report that broadcast messages in Mobile WiMAX networks should be synchronized throughout all the base stations to gain the benefit of beamforming technique. A simple synchronization implementation of broadcast messages in Mobile WiMAX networks is presented. Using this technique, the interference between broadcast messages and beamformed messages can be reduced.

• Journal of the Institute of Convergence Signal Processing
• /
• v.22 no.2
• /
• pp.64-70
• /
• 2021

Nowadays, there are significant interests in real-time remote control using wireless networks. In implementing real-time remote control, one important factor is delay performance of real-time control message. Especially, the technique to reduce jitter of delay is necessary in transmitting periodically real-time control message. In this paper, we proposed synchronized transmission to reduce jitter of delay, when real-time control message was transmitted through wireless networks. The proposed transmission kept synchronization between source node and wireless transmitter and controlled transmission instance to transmit real-tie control message with fixed delay in wireless networks. According to results of experiment in military unmanned vehicle system, the proposed transmission reduced jitter of delay as 32% as that of a non-employing case.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.11 no.3
• /
• pp.896-905
• /
• 2010

The sensor networks can be used attractively for various application areas. Time synchronization is important for any Ubiquitous Sensor Networks (USN) systems. USN makes extensive use of synchronized time in many contexts for data fusion. However existing time synchronization protocols are available only for homogeneous sensor nodes of USN. It needs to be extended or redesigned in order to apply to the USN with heterogeneous sensor nodes. Because heterogeneous sensor nodes have different clock sources with the SinkNode of USN, it is impossible to be synchronized global time. In addition, energy efficiency is one of the most significant factors to influence the design of sensor networks, as sensor nodes are limited in power, computational capacity, and memory. In this paper, we propose specific time synchronization based on master-slave topology for the global time synchronization of USN with heterogeneous sensor nodes. The time synchronization master nodes are always able to be synchronized with the SinkNode. Then time synchronization master nodes enable time synchronization slave nodes to be synchronized sleep periods. The proposed master-slave time synchronization for heterogeneous sensor nodes of USN is also helpful for power saving by maintaining maximum sleep time.

• Journal of the Institute of Electronics and Information Engineers
• /
• v.50 no.12
• /
• pp.98-106
• /
• 2013

The duty-cycle synchronization among mobile sensor nodes with energy-harvesting is very important. The nodes should keep their duty-cycle same to others as much as possible because they have to cooperate each other and to consume energy efficiently. The distribution of node position in network affects not only node connectivity but also the active time of synchronized nodes, and it relates to network life-time finally. In this paper, we introduce a network topology change algorithm (TCA) for energy-harvesting mobile sensor networks based on self-synchronized duty-cycling. The algorithm tries to change a network topology into a balanced topology where the mobile sensor nodes are unified according to the density of the number of nodes. For TCA, both fluid flow algorithm and flock dispersion algorithm are proposed and they are evaluated through the simulation in agent based modeling language. TCA is applied to the energy-harvesting mobile sensor networks to improve the synchronization of duty-cycle and to reduce the variation of energy consumption among nodes.

• Journal of Communications and Networks
• /
• v.11 no.6
• /
• pp.634-644
• /
• 2009

A diversity of wireless networks, with rapidly evolving wireless technology, are currently in service. Due to their innate physical layer vulnerability, wireless networks require enhanced security components. WLAN, WiBro, and UMTS have defined proper security components that meet standard security requirements. Extensive research has been conducted to enhance the security of individual wireless platforms, and we now have meaningful results at hand. However, with the advent of ubiquitous service, new horizontal platform service models with vertical crosslayer security are expected to be proposed. Research on synchronized security service and interoperability in a heterogeneous environment must be conducted. In heterogeneous environments, to design the balanced security components, quantitative evaluation model of security policy in wireless networks is required. To design appropriate evaluation method of security policies in heterogeneous wireless networks, we formalize the security properties in wireless networks. As the benefit of security protocols is indicated by the quality of protection (QoP), we improve the QoP model and evaluate hybrid security policy in heterogeneous wireless networks by applying to the QoP model. Deriving relative indicators from the positive impact of security points, and using these indicators to quantify a total reward function, this paper will help to assure the appropriate benchmark for combined security components in wireless networks.

• Proceedings of the KIEE Conference
• /
• 2004.11c
• /
• pp.391-393
• /
• 2004

For performance and stability of a synchronized system, we need an efficient Clock Tree Synthesis(CTS) methodology to design clock distribution networks. In a system-on-a-chip(SOC) design environment, CTS effectively distributes clock signals from clock sources to synchronized points on layout design. In this paper, we suggest the pre-layout analysis of the clock network including gated clock, multiple clock, and test mode CTS optimization. This analysis can help to avoid design failure with potential CTS problems from logic designers and supply layout constraints so as to get an optimal clock distribution network. Our new design flow including pre-layout CTS analysis and structural violation checking also contributes to reduce design time significantly.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.31 no.9A
• /
• pp.868-877
• /
• 2006

Sensor network applications need synchronized time to the highest degree such as object tracking, consistent state updates, duplicate detection, and temporal order delivery. In addition, reliability issues and fault tolerance in sophisticated sensor networks have become a critical area of research today. In this paper, we proposed a fault tolerant clock management scheme in sensor networks considering two cases of fault model such as network faults and clock faults. The proposed scheme restricts the propagation of synchronization error when there are clock faults of nodes such as rapid fluctuation, severe changes in drift rate, and so on. In addition, it handles topology changes. Simulation results show that the proposed method has about $1.5{\sim}2.0$ times better performance than TPSN in the presence of faults.