• 제목/요약/키워드: Synchronization protocol

검색결과 259건 처리시간 0.025초

검색 정보 사전 동기화를 이용한 저비용 RFID 인증 방식 (Low-cost Authentication Protocol Using Pre-synchronized Search Information in RFID System)

  • 하재철;박제훈;하정훈;김환구;문상재
    • 정보보호학회논문지
    • /
    • 제18권1호
    • /
    • pp.77-87
    • /
    • 2008
  • 최근 유비쿼터스 분산 환경에 적합한 해쉬 기반의 효율적인 RFID 인증 프로토콜들이 제안되었다. 분산 환경에 적합하기 위해서는 고정된 ID를 사용하는 것을 일반적인 특징으로 하는데, 기존 방식들은 ID를 Back-end DB에서 검색하는데 시간이 많이 소요되거나 안전성 측면에서 몇 가지 취약점을 가지고 있다. 본 논문에서는 분산 환경에 적합하도록 고정 ID를 사용하면서 DB에서 ID 검색이 용이한 RFID 인증 프로토콜을 제안하고자 한다. 제안 프로토콜의 특징은 DB가 다음 세션의 ID 검색을 용이하게 하기 위해 이전 세션에서 미리 검색 정보를 저장하여 둔다는 점이다. 제안 프로토콜에서는 태그와 DB간의 비동기 현상이 일어나지 않을 경우, 태그와 DB가 각각 단 3번씩의 해쉬 연산만으로 상호 인증을 수행할 수 있다.

무선 백본 기반 통신망을 위한 상호 보완 SIP 서버 배치 구조 (Mutual-Backup Architecture of SIP-Servers in Wireless Backbone based Networks)

  • 김기훈;이성형;김재현
    • 전자공학회논문지
    • /
    • 제52권1호
    • /
    • pp.32-39
    • /
    • 2015
  • 무선 백본 기반 통신망에서의 음성 통신은 패킷교환기반의 VoIP(Voice over Internet Protocol) 시스템으로 변화하고 있다. 패킷교환기반 VoIP 시스템에서는 가입자 관리 및 연결 수립 지원을 위한 호 처리 방안이 필요하다. 그리고 신뢰성 있는 사용자 관리 및 호 처리를 위해 중앙집중식 호 처리 구조보다는 다수의 호 처리 서버 배치 구조가 필요하며, 구조 변화에 따라 다른 동기화 기법, 호 처리 기법이 필요하다. 본 논문에서는 무선 백본 기반 통신망을 위한 백업 서버 기반 상호 보완적 SIP(Session Initiation Protocol) 서버 배치 구조를 제안한다. 또한 SIP 서버 간 동기화 과정 및 정보 교환에 사용될 메시지 구조를 제안한다. 그리고 손실이 발생하는 네트워크 환경에서도 빠른 호 처리를 할 수 있도록 사용자가 동시에 다수의 SIP 서버를 탐지하기 위한 FSM(Flood Search Message) 방식을 제안한다. 수학적 성능 평가 과정으로 제안하는 서버 배치 구조 활용시 호 처리 성공률을 높여 신뢰성이 증가함을 확인하였다. 그리고 메시지 교환 기법을 사용할 경우 표준 SIP 기법에 비해 호처리 지연시간을 줄이며 백업 서버 수에 관계없이 일정 수준의 호 처리 지연시간이 나타남을 확인하였다.

Initial Rendezvous Protocol using Multicarrier Operation for Cognitive Radio Ad-hoc Networks

  • Choi, Ik-Soo;Yoo, Sang-Jo;Seo, Myunghwan;Han, Chul-Hee;Roh, Bongsoo
    • KSII Transactions on Internet and Information Systems (TIIS)
    • /
    • 제12권6호
    • /
    • pp.2513-2533
    • /
    • 2018
  • In cognitive radio technology, the overall efficiency of communications systems can be improved without allocating additional bands by allowing a secondary system to utilize the licensed band when the primary system, which has the right to use the band, does not use it. In this paper, we propose a fast and reliable common channel initialization protocol without any exchange of initialization messages between the cluster head and the member nodes in cognitive ad-hoc networks. In the proposed method, the cluster and member nodes perform channel-based spectrum sensing. After sensing, the cluster head transmits a system activation signal through its available channels with a predetermined angle difference pattern. To detect the cluster head's transmission channels and to join the cluster, each member node implements fast Fourier transform (FFT) and computes autocorrelation for the angle difference sequence of the received signal patterns. This is compared to the predetermined reference angle difference pattern. The join-request and channel-decision procedures are presented in this paper. Performance evaluation of the proposed method is presented in the simulation results.

A Frame Collision Reduction Method for Safety Message Broadcasting in IEEE1609.4/IEEE802.11p based VANETs

  • Wang, Lei;Jing, Weiping
    • KSII Transactions on Internet and Information Systems (TIIS)
    • /
    • 제12권3호
    • /
    • pp.1031-1046
    • /
    • 2018
  • Vehicular ad hoc network (VANET) is a dedicated network to connect vehicles without any centralized administration or infrastructure. The wireless access in vehicular environments (WAVE) protocol leveraging IEEE 1609/802.11p is widely implemented for VANETs. However, in congested traffic situation, the performance of the WAVE system degrades significantly due to serious collision, especially for safety related broadcast services on the control channel (CCH) interval due to the inherent drawback of its collision avoidance mechanisms called carrier sense multiple access with collision avoidance (CSMA/CA). In this paper, we propose a method that can decrease the number of frame collisions in CCH with a few modifications to the IEEE 802.11p protocol. In the paper, vehicles still employ CSMA/CA to compete for the channel access opportunity. However, by taking advantage of periodicity of synchronization interval, a two-state switching scheme introducing two new inter frame space (IFS) is proposed to reduce the number of competing vehicles substantially and as a result, the collision probability is significantly decreased. The simulation results demonstrate the superiority of the proposed method in packet collision rate.

네트워크 시간 동기화를 활용한 효과적 셋톱박스 시스템 복구 방안에 관한 연구 (A study on the Set-top Box System Recovery using Network Time Synchronization)

  • 한경식;김인기;민태훈;손승일
    • 한국정보통신학회:학술대회논문집
    • /
    • 한국정보통신학회 2013년도 춘계학술대회
    • /
    • pp.647-649
    • /
    • 2013
  • 본 논문은 안드로이드 기반의 고정된 네트워크 하드웨어를 가진 셋톱박스에서 Network Time Protocol(NTP)을 활용한 효과적 시스템 복구 방안에 관한 연구이다. 셋톱박스의 경우 제품의 특성상 사용자의 요구에 대한 대응이 여타 전자제품에 비해 빠르게 반응해야 하기 때문에 항시 전원이 공급되어 동작하는 특징을 가진다. 하지만, 안드로이드와 같은 범용 OS기반의 셋톱박스의 경우 주기적인 시스템 리셋을 통한 캐쉬 및 메모리 초기화가 불가피한 단점이 있다. 본 논문은 이러한 문제점을 개선하기 위해 시스템의 시간을 가져오는 NTP 클라이언트 프로그램을 활용하여 시스템 리셋하고, 복구하도록 하였다.

  • PDF

FPGA를 이용한 CAN 통신 IP 설계 및 구현 (Design and Implementation of CAN IP using FPGA)

  • 손예슬;박정근;강태삼
    • 제어로봇시스템학회논문지
    • /
    • 제22권8호
    • /
    • pp.671-677
    • /
    • 2016
  • A Controller Area Network (CAN) is a serial communication protocol that is highly reliable and efficient in many aspects, such as wiring cost and space, system flexibility, and network maintenance. Therefore, it is chosen for the communication protocol between a single chip controller based on Field Programmable Gate Array (FPGA) and peripheral devices. In this paper, the design and implementation of CAN IP, which is written in VHSIC Hardware Description Language (VHDL), is presented. The implemented CAN IP is based on the CAN 2.0A specification. The CAN IP consists of three processes: clock generator, bit timing, and bit streaming. The clock generator process generates a time quantum clock. The bit timing process does synchronization, receives bits from the Rx port, and transmits bits to the Tx port. The bit streaming process generates a bit stream, which is made from a message received from a micro controller subsystem, receives a bit stream from the bit timing process, and handles errors depending on the state of the CAN node and CAN message fields. The implemented CAN IP is synthesized and downloaded into SmartFusion FPGA. Simulations using ModelSim and chip test results show that the implemented CAN IP conforms to the CAN 2.0A specification.

N-스크린 환경을 위한 CoAP 기반 디지털 캐로절 시스템 (A Digital Carousel System based on CoAP for N-Screen Environment)

  • 고응남
    • 디지털콘텐츠학회 논문지
    • /
    • 제17권1호
    • /
    • pp.59-63
    • /
    • 2016
  • 본 논문에서는 N 스크린 서버와 클라이언트 시스템 환경을 통하여 데이터의 신뢰성을 향상시키는 모델에 대해서 기술한다. 디지털 캐로절은 사용자들에게 미디어 동기화 메카니즘을 통하여 미디어 객체 공유를 가능하게 한다. 본 시스템은 공동 작업에 참여한 사용자들이 다른 참여자들에게 같은 뷰로써 공유된 미디어 객체들을 참조할 수 있도록 N 스크린 환경을 위한 CoAP(Constrained Application Protocol) 기반 디지털 캐로절 시스템을 제안한다. 이 시스템에 의해서 응용 데이터를 공유할 수 있다. N 스크린의 기술과 CoAP 기반 멀티미디어 공동 작업에서 실행되는 기능에 대한 시스템의 기능 비교도 하였다.

흐름제어를 이용한 순서화 멀티캐스트 프로토콜에 관한 연구 (A Study on the Ordered Multicast Protocols with Flow Control)

  • 박판우;이기현;조국현
    • 한국통신학회논문지
    • /
    • 제17권10호
    • /
    • pp.1117-1130
    • /
    • 1992
  • 본 논문에서는 컴퓨터 망을 통한 분산 시스템의 효율적인 프로세스 관리 및 메시지 전송을 위한 프로세스 그룹 통신에 관하여 연구한다. 메시지 전송중 장애가 발생할 수 있는 단일 프로세스 그룹에 대하여 송수신 메시지의 순서호를 유지하면서 흐름 제어를 실시하는 멀티캐스트 프로토콜을 제안한다. 프로세스 그룹을 형성하는 구성원들은 그룹 구성원 관계 서비스를 이용하여 실행중 그룹을 탈퇴할 수도 있고, 또한 새로운 구성원의 가입도 언제든지 가능하도록 하였다. 메세지 배달은 벡터 타임 논리적 타임 스템프를 이용하여 필요하다면 메세지 배달지연을 행하고, 구성원 변경에 대응하기 위한 가상적 동기화를 실시한다. 결론적으로 본 논문에서 제안되는 멀티캐스트 프로토콜은 메세지들의 인과적 배달순서를 유지하면서, 또한 과잉 밀집 현상등을 방지하기 위한 흐름제어 기법을 적용하여 신뢰성과 메세지 전송 효율성을 갖도록 설계하였다.

  • PDF

센서 네트워크에서 전력소모와 지연시간 개선을 위한 MAC 계층 프로토콜 연구 (MAC Layer Protocol for Improvement in Power Consumption and Time Delay in a Sensor Network)

  • 신재관;박동찬;김석찬
    • 한국통신학회논문지
    • /
    • 제40권2호
    • /
    • pp.366-368
    • /
    • 2015
  • 이 논문은 재난감지 시스템과 같이 비주기적 패킷이 발생하는 센서 네트워크를 위한 MAC 프로토콜을 제안한다. 기존 무선 센서 네트워크에 사용되던 B-MAC은 짧은 지연시간을 가지지만 과도한 프리엠블과 오버히어링으로 인한 전력손실이 발생하며, S-MAC은 동기화로 인한 전력소모가 많은 단점을 가진다. 따라서 이 논문에서는 S-MAC의 전력 소모를 개선하고 B-MAC의 오버헤드와 오버히어링을 개선한 H-MAC을 제안하고 성능을 분석한다.

SMIL(Synchronized Multimedia Integration Language) 전용 저작도구의 설계 및 구현 (Design and Implementation of the SMIL Authoring Tool)

  • 신동규;신동일;김세영
    • 정보처리학회논문지B
    • /
    • 제10B권1호
    • /
    • pp.103-110
    • /
    • 2003
  • SMIL은 XML을 기반으로 한 선언적 마크업 언어로서, 멀티미디어 개체들의 상호 유기적인 동기화로 워 상에서 효과적인 멀티미디어 표현을 가능하게 한다. 본 논문에서는 멀티미디어 통한 언어인 SMIL을 이용하여, 웹 멀티미디어 문서를 직관적으로 작성하고, 생성된 정보를 다양하게 활용 가능하게 하는 SMIL전용 저작도구를 설계 및 구현하였다. 문서의 생성, 관리, 저작 모듈뿐만 아니라, 일반 사용자에게 손쉬운 멀티미디어 표현(Presentation)의 저작을 제공하기 위하여 인터넷 망이 대역폭에 따른 템플릿 인터페이스를 제공하였고, SMIL 컨텐츠 데이터베이스 서버와의 연동으로 다수사용자를 위한 SMIL문서 관리 기능을 구현하였다.