• The Journal of the Acoustical Society of Korea
• /
• v.20 no.6
• /
• pp.87-93
• /
• 2001

As a new type of a linear decorrelating receiver, the Pseudo-Decorrelator was presented for asynchronous code division multiple access systems by the author. In this paper, the concept of the Pseudo-Decorrelator is extended to derive a receiver for WCDMA uplink systems over an additive white Gaussian noise channel. Starting with the analysis of the multiple access components of the decision statistics, a non-square cross-correlation matrix for each bit is obtained. This cross-correlation matrix is then inverted, and the inverted matrix is applied to the decision statistics obtained from a conventional receiver. In this receiver, the detection process can be started after the first three consecutive bits are received. Simulation results are presented for K-user systems over an additive white Gaussian noise channel under the circumstances in which synchronization errors, including time delay errors and carrier phase errors exist. It is shown that the proposed receiver performs better than a conventional receiver and parallel interference canceller.

• The Journal of the Korea institute of electronic communication sciences
• /
• v.3 no.3
• /
• pp.177-182
• /
• 2008

Because output of multi-code CDMA system adapted high speed data transmission becoming multi-level system use linear amplifier in output stage and complex output signal. Therefore, Multi-Code CDMA system has shortcoming of high price, high complexity etc. Binary CDMA technology that allow fetters in existing CDMA technology to supplement this shortcoming proposed. In binary CDMA system When correlator process high speed data, bottle-neck phenomenon is happened on synchronization acquisition process, it is very important parameter. Because existent correlator must there be advantage that power consumption is small but flow addition of several stages to receive correlation's value, the processing speed has disadvantage because the operation amount is much. Therefore in this paper, proposed correlator has characteristic such as data is able to high speed processing, chip area is independent and power consumption is constant in structure in binary CDMA system.

• The Journal of the Acoustical Society of Korea
• /
• v.41 no.2
• /
• pp.150-158
• /
• 2022

This paper presents the results of a sea trial for very long range spread spectrum underwater acoustic communication conducted in the East Sea in September 2021. Signals were collected through 8 vertical sensors, and the range between the transmitter and receiver was about 160 km. 30 bps Multi-Code Spread Spectrum (MCSS) method and 100 bps Chirp Spread Spectrum method were used for the transmitting signal generation. The results show that when the channel coding technique was not used in a single channel, the uncoded bit error rate was high, but when the Equal Gain Combining (EGC) diversity technique was used after frame synchronization in each receiving channel, the uncoded bit error rate was reduced to 0.1 or less.

• Journal of Positioning, Navigation, and Timing
• /
• v.12 no.3
• /
• pp.245-255
• /
• 2023

Time comparison techniques are necessary for generating and keeping Coordinated Universal Time (UTC) and distributing standard time clocks. Global Navigation Satellite System (GNSS) Common View, GNSS All-in-View, Two-Way Satellite Time and Frequency Transfer (TWSTFT), Very Long Baseline Interferometry (VLBI), optical fiber, and Network Time Protocol (NTP) based methods have been used for time comparison. In these methods, GNSS based time comparison techniques are widely used for time synchronization in critical national infrastructures and in common areas of application such as finance, military, and wireless communication. However, GNSS-based time comparison techniques are vulnerable to jamming or interference environments and it is difficult to respond to GNSS signal disconnection according to the international situation. In response, in this paper, Code-Division Multiple Access (CDMA) based All-to-All TWSTFT operation method is proposed. A software-based simulation platform also was designed for performance analysis in multi-TWSTFT signal environments. Furthermore, code and carrier measurement jitters were calculated in multi-signal environments using the designed simulation platform. By using the technique proposed in this paper, it is anticipated that the TWSTFT-based time comparison method will be used in various fields and satisfy high-performance requirements such as those of a GNSS master station and power plant network reference station.

• Journal of the Institute of Electronics Engineers of Korea SP
• /
• v.43 no.3 s.309
• /
• pp.9-16
• /
• 2006

Many image and video compression algorithms work by splitting the image into blocks and producing variable-length code bits for each block data. If variable-length code data are transmitted consecutively over error-prone channel without any error protection technique, the receiving decoder cannot decode the stream properly. So the standard image and video compression algorithms insert some redundant information into the stream to provide some protection against channel errors. One of redundancies is resynchronization marker, which enables the decoder to restart the decoding process from a known state in the event of transmission errors, but its usage should be restricted not to consume bandwidth too much. The Error Resilient Entropy Code(EREC) is well blown method which can regain synchronization without any redundant information. It can work with the overall prefix codes, which many image compression methods use. This paper proposes EREREC method to improve FEREC(Fast Error-Resilient Entropy Coding). It first calculates initial searching position according to bit lengths of consecutive blocks. Second, initial offset is decided using statistical distribution of long and short blocks, and initial offset can be adjusted to insure all offset sequence values can be used. The proposed EREREC algorithm can speed up the construction of FEREC slots, and can improve the compressed image quality in the event of transmission errors. The simulation result shows that the quality of transmitted image is enhanced about $0.3{\sim}3.5dB$ compared with the existing FEREC when random channel error happens.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2002.05a
• /
• pp.485-489
• /
• 2002

The concepts from OOP have been integrated in a concurrency, leading to the emergence of concurrent OOP. Concurrency of concurrent OOP and various model technique of OOP language are integrated had been proposed. Concurrent programming and OOP technique unite that can gain various kinds advantage to develop concurrency application program. There have been a number of models proposed for integrating concurrency and OOP However, concurrency and inheritance are two paradigms which are difficult to combine in a suitable manner. The inheritance anomaly is the conclicted phenomena, which occurs only when concurrency is integrated with inheritance. The inheritance anoay is referred to as the serious difficulty in integrating inheritance and concurrency in a simple and efficient manner within a concurrent OOP. Concurrency and inheritance with integrated that Drop reusability of object remarkably and require re-justice of code that is inherited in subclass. So concurrency and inheritance with integrated Collision that happen between two special qualitys or Interference phenomenon is inheritance anomaly. Effect of inheritance anomaly minimum Much study findings announced about access method to improve code reusability. Wish to approach in paper that is division by synchronization code and method code to solve interference problem between and concurrency.

• Journal of the Korean Society for Precision Engineering
• /
• v.31 no.8
• /
• pp.721-728
• /
• 2014

In this paper, it is proposed a method of optimizing path parameters for large-area laser processing. On-the-fly system is necessary for large-area laser processing of uniform quality. It is developed a MOTF(Marking On-The-Fly) board for synchronizing the stage and scanner. And it is introduced the change of the error due to the change of parameters and algorithm for large-area laser processing. This algorithm automatically generates stage path and a velocity profile using acceleration and deceleration parameters. Since this method doesn't use a G-code, even if without expert knowledge, it has an advantage that can be accessed easily. Angle of one of the square of $350{\times}350mm$ was changed from $50^{\circ}$ to $80^{\circ}$ and analyzed the error corresponding to the value of Ta. It is calculated the value of Ta of the best with a precision of 20um through measurement of accuracy according to the Ta of each angle near the edge.

• Proceedings of the KIEE Conference
• /
• 2008.10b
• /
• pp.314-315
• /
• 2008

본 논문에서는 임베디드 리눅스와 uCOS-2 간 소스코드 변환에 대한 연구를 위해 API 정변환/역변환기(API 변환기)를 이용하여 두 RTOS 간 소스코드 변환을 실험한다. API 변환기는 임베디드 소프트웨어의 개발을 돕기 위해 개발된 프로그램으로서, 정변환과 역변환 기능을 이용하여 이종 RTOS 간 소스코드를 자동으로 상호 변환한다. 정변환이란 중간형태의 C-코드인 CIC 파일에서 특정 RTOS를 위한 C-코드로 변환하는 것을 의미한다. 반대로 역변환은 특정 RTOS를 위한 C-코드로부터 CIC 파일로 변환하는 것을 가리킨다. 본 논문의 실험에서는 임베디드 리눅스와 uCOS-2의 동기화 소스코드 예제를 API 변환기를 이용하여 상호 변환해본다. 그리고 변환된 소스코드의 정상동작 여부를 확인하기 위해 각각의 타깃보드 위에 소스코드를 포팅한다.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.16 no.11
• /
• pp.1054-1062
• /
• 1991

In this paper a communication system using direct sequence spread spectrum (DS/SS) technique is constructed to transmit burst format data over power line channel with impulsive noise and narrowband interferences. Fast code synchronization is acquired by digital matched filter and data decision is accomplished by sampling pulses. In order to examine the performance of the power line communication system, but error rate and packet loss rate are measured over the simulation channel with various noise sources. When the packet composed of 1-bit preamble and 63-bit data is transmitted under very high burst impulsive noise, the bit error rate is about 10$^3$-10$^4$ and the packet loss rate is below 0.07.