• Korean Journal of Veterinary Research
• /
• v.34 no.2
• /
• pp.395-406
• /
• 1994

To study the conditions to enhance success of embryo transfer in the dog, 20 mixed-breed bitches were used for the experiment along with 4 male dogs for mating. The bitches were paired according to synchronism of natural estrus, or the counterpart as donor or recipient was treated with gonadotropin as FSH (follicular stimulating hormone) or PMSG (pregnant mare serum gonadotropin) for induction of estrus to be synchronized with estrus of the other bitch in natural estrus. Embryo recovery was performed in two ways for comparison, either by flushing each uterine horn after ovariohysterectomy or by flushing each horn in the state of non-ovariohysterectomy. In addition, the result of pregnancy according to the embryo stage and the repeatability of the experimental animals as donor or recipient were also investigated. FSH or PMSG was administered to the bitches which had passed over 4 months from last estrus, resulting in estrus-positive in 3 dogs of 6 FSH-treated dogs (50.0%), and in 5 dogs of 9 PMSG-treated dogs (55.6%), determined by proestrus signs and vaginal smear test. Estrus-positive bitches induced with gonadotropin were used as donor or recipient resulting in one embryo-recovered bitch as donor and one offspring-delivered bitch as recipient in 5 PMSG-treated dogs, whereas no result was obtained from 3 FSH-treated dogs. The rate of embryo recovery to be compared with number of corpus luteum was 68.2% in ovariohysterectomized dogs and 55.2% in non-ovariohysterectomized dogs, respectively. The number of dogs from which embryo was collected were 4 dogs of 6 ovariohysterectomized dogs (66.7%) and 6 dogs of 7 non-ovariohysterectomized dogs (85.7%), respectively. The result of parturition was obtained from one dog of 5 estrus-induced recipients, whereas no result was obtained from 3 natural-estrus recipients. The only dog which delivered a male puppy had been transferred 3 morulae and 2 blastocysts. Of 6 repeat-used bitches in canine embryo transfer, 3 dogs showed repeatability either as donor or recipient. These results indicated that inducing estrus of a dog with gonadotropin is feasible in canine embryo transfer to be synchronized with that of a natural-estrus dog, that embryo recovery is also possible in non-hysterectomized dogs, that the estrus-induced dog is also usable as recipient to result in parturition, and that repeat-use of a bitch as donor or(and) recipient is possible in canine embryo transfer.

• Journal of KIISE:Computing Practices and Letters
• /
• v.9 no.1
• /
• pp.13-24
• /
• 2003

MPEG-4 is a standard for multimedia applications and provides a set of technologies to satisfy the needs of authors, service providers and end users alike. In this paper, we suggest a Real-time Multiple Circular Buffer (M4RM Buffer) model, which is suitable for streaming these MPEG-4 contents efficiently. M4RM buffer generates each structure of the buffer, which matches well with each object composing an MPEG-4 content, according to the transferred information, and manipulates multiple read/write operations only by its reference. It divides the decoder buffer and the composition buffer, which are described in the standard, by the unit of frame allocated to minimize the range of access. This buffer unit of a frame is allocated according to the object description. Also, it processes the objects synchronization within the buffer and provides APIs for an efficient buffer management to process the real-time user events. Based on the performance evaluation, we show that M4RM buffer model decreases the waiting time in a buffer frame, and so allows the real-time streaming of an MPEG-4 content using the smaller size of the memory block than IM1-2D and Window Media Player.

• Journal of the Korean Geotechnical Society
• /
• v.27 no.12
• /
• pp.107-116
• /
• 2011

Rigid soil containers (or rigid boxes) are often used for 1g shaking table tests. The rigid boxes, however, do not accurately simulate the amplification of ground acceleration and phase difference of seismic motion in the model ground due to the confinement of shear deformation and the reflection of seismic wave at the box walls. Laminar soil containers (or laminar shear boxes) can simulate the free field motion at convincingly superior accuracy than the rigid ones. In this study, the soft ground is modeled for both types of boxes and is subjected to seismic loading using a 1g shaking table. The comparison of the results using the two types of soil containers illustrates that, in case of the rigid box, the ground acceleration shows non uniform distribution and the phase synchronization of input motion. Whereas, the dynamic behavior of the laminar shear box shows good agreement with the free field behaviors such as the amplification of ground acceleration and the occurrence of phase difference.

• Journal of Broadcast Engineering
• /
• v.10 no.2
• /
• pp.210-220
• /
• 2005

This paper presents and analyzes laboratory test results of Equalization Digital On-Channel Repeater (EDOCR) using ATSC(Advanced Television Systems Committee) terrestrial digital TV broadcasting system. The EDOCR laboratory test, which is done at CRC(Communications Research Centre) Canada, is classified to receiver test, transmitter test, and synchronization test between transmission and reception frequencies. The receiver part includes feedback signal, random noise, single echo, multi-path ensemble, and NTSC/DTV interference test. The transmitter part includes out-of channel emission, quality of transmitting signal, and phase noise test. By the field test results, the receiver part of the EDOCR eliminates average 5.5 dB of feedback or single echo signal in range of 0 to 11 ${\mu}s$ and has average 18.6 dB at TOV(Threshold of Visibility) under random noise environment. Also, the transmitter part of the EDOCR satisfies the specification of US FCC(Federal Communications Commission), and frequency difference between transmitter and receiver is zero.

• Culinary science and hospitality research
• /
• v.22 no.5
• /
• pp.52-63
• /
• 2016

This research was conducted about four weeks from April 1, 2016 until April 30. Data collection for customers who visit the restaurant franchise in Seoul. Results shown that choose a restaurant franchise result sync conducted a regression analysis to analyze the impact on consumers' purchase intention. Kindness was the influence of B=0.597 (p<.001), is a unique B=0.210 (p<.001), cleanliness is B=0.230 (p<.001) significant information on the degree of consumer purchases (+). Second, choose a restaurant franchise motivation verify the moderating effect of consumer attitudes between the purchase intention of consumers eating out analysis. In the first stage determining factor model to 0.630, F=128.612 (p<0.01) emerged as significant. In the second stage of the explanatory models increased by the addition of an additional 6.1% of consumer attitudes consumer attitudes to F=58.656 (p<0.01) for it came out significantly. In Step 3 of Select synchronization options* and the increase in explanatory power due to the additional input of consumer attitudes 0.6%, so for F=1.585 (p<0.01) emerged as a significant moderating effect.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.23 no.7
• /
• pp.1797-1806
• /
• 1998

Future satellite communication systems will be developed at Ka-band (20/30 GHz) owing to the relatively wide frequency allocation and current freedom from terrestrial interference for multimedia services. A serious disadvantage of the Ka-band, however, is the very high atmospheric attenuation in rainy weather. Synchronous CDMA drastically redces the effect of self-noise with several interesting features of CDMA for mobile communications such as fixible freuqncy rese, the capability of performin soft-handover and a lower sensitivity to interference. This paper evaluates the performance of a synchronous CDMA reture link for a Ka-band geostationary satellite communication system. For a fixed satellite channel whose characteristics depend on weather conditions, the signal envelope and phase for this channel is modelled as Gaussian. The bit error and outage probability, and the detection loss due to imperfect chip timing synchronization is analytically evaluated and the system capacity degaradation due to the weather condition is estimated. The two cases consist of the general case in which all users are affected by rain condition, and the worst case in which the reference user is only affected by rain attenuation. the results for two cases of rain condition clearly show that synchronous CDMA eases the power control requirements and has less sensitivity to imperfect power control.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.34 no.11C
• /
• pp.1098-1105
• /
• 2009

In this paper, we propose an asynchronous UWB (Ultra Wide Band) Positioning scheme that can provide precise positioning performance with low complexity and low power consumption. We also present the residual test to improve the positioning performance in multipath channels having heavy NLoS (Non-Line of Sight) components. As compared to conventional ToA (Time of Arrival) positioning scheme that requires round-trip transmissions as many as the number of beacons, the proposed UWB positioning scheme effectively decrease power consumption and processing delay since a single round-trip transmission is only required. Also, as compared to conventional TDoA (Time Difference of Arrival) positioning scheme requiring precise synchronization among the beacons, asynchronous nature of the proposed scheme achieves very low system complexity. Through simulations in LoS (Line of Sight) channel models, we observe that the proposed scheme requires low system complexity, low power consumption, while providing positioning performance of almost the same accuracy as the conventional ToA and TDoA positioning schemes. In addition, the proposed scheme by employing the residual test achieves accurate positioning performance even in multipath channels having heavy NLoS components.

• The Journal of the Institute of Internet, Broadcasting and Communication
• /
• v.13 no.5
• /
• pp.17-26
• /
• 2013

ISO/IEC 29157 originally developed in the Republic of Korea and is based on commercially available PicoCast v1.0. ISO/IEC JTC1 SC6 was registered by the international standard on May 2010. A single platform for a variety of applications and media formats to support development objectives were. ISO/IEC 29157 based wireless networks, ie, Pico-net to master node periodically transmit sync signal is synchronized to the number of slave nodes have the communications structure. Pico-net also supports a variety of network topologies and direct communication between nodes(single-hop communication) and QoS is guaranteed. But Pico-net network structure has the following problems. Loss of communication problems due to mobile nodes, resulting in limitations of node mobility and wireless network operation range of conventional wireless networks operating range less than 1/4 was reduced to the problem. In this paper, a possible solution to the problems mentioned is proposed, using multi-hop communication technology and sync signal transmission technology between nodes.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.12 no.4
• /
• pp.630-643
• /
• 2001

In this paper, the performance of a Multi-Carrier DS-CDMA system with Hybrid $SC/MRC- L_{c}/L$ diversity in the multipath Rayleigh fading environment is analyzed and compared with that of a Wideband DS-CDMA system. Each carriers of the number of the input diversity branches in the Multi-Carrier DS-CDMA system is L and among L, the branches of $L_c$ are chosen to be maximum-ratio-combined. And the diversity outputs are coherent-detected and despread by the correlator of each carrier. As the result, we have known that the structure of the Wideband DS-CDMA system with Hybrid $SC/MRC-L_{c}/L$ diversity reception becomes simple due to no synchronization of bit or phase and in terms of the error performance, the performance of Hybrid $SC/MRC- L_{c}/L$ diversity is better than that of selection diversity, but worse than that of MRC diversity. Moreover, the performance of a Multi-Carrier DS-CDMA system is better than that of a Wideband DS-CDMA system in multipath Rayleigh fading channel since Hybrid $SC/MRC- L_c/L$ diversity can obtain gain from each diversity branch. In case four carriers are used and required BER is $10^{-6}$ in wireless data communication, Hybrid SC/MRC-2/4 diversity can increase more 17 users than Hybrid SC/MRC-2/3 diversity because the better input branches can be selected through increase of input branches.

• Journal of IKEEE
• /
• v.24 no.1
• /
• pp.25-32
• /
• 2020

In this paper, we propose an image generator for OLED panel test that can compensate for color coordinates and luminance by using panel defect inspection and optical measurement while displaying images on OLED panel. The proposed image generator consists of two processes: the image generation process and the process of compensating color coordinates and luminance using optical measurement. In the image generating process, the panel is set to receive the panel information to drive the panel, and the image is output by adjusting the output setting of the image generator according to the panel information. The output form of the image is configured by digital RGB method. The pattern generation algorithm inside the image generator outputs color and gray image data by transmitting color data to a 24-bit data line based on a synchronization signal according to the resolution of the panel. The process of compensating color coordinates and luminance using optical measurement outputs an image to an OLED panel in an image generator, and compensates for a portion where color coordinates and luminance data measured by an optical module differ from reference data. To evaluate the accuracy of the image generator for the OLED panel test proposed in this paper, Xilinx's Spartan 6 series XC6SLX25-FG484 FPGA was used and the design tool was ISE 14.5. The output of the image generation process was confirmed that the target setting value and the simulation result value for the digital RGB output using the oscilloscope matched. Compensating the color coordinates and luminance using optical measurements showed accuracy within the error rate suggested by the panel manufacturer.