• Advances in nano research
• /
• 제12권3호
• /
• pp.231-251
• /
• 2022

Dynamic behavior of temperature-dependent Reddy functionally graded (RFG) nanobeam subjected to thermomagnetic effects under the action of moving point load is carried out in the present work. Both symmetric and sigmoid functionally graded material distributions throughout the beam thickness are considered. To consider the significance of strain-stress gradient field, a material length scale parameter (LSP) is introduced while the significance of nonlocal elastic stress field is considered by introducing a nonlocal parameter (NP). In the framework of the nonlocal strain gradient theory (NSGT), the dynamic equations of motion are derived through Hamilton's principle. Navier approach is employed to solve the resulting equations of motion of the functionally graded (FG) nanoscale beam. The developed model is verified and compared with the available previous results and good agreement is observed. Effects of through-thickness variation of FG material distribution, beam aspect ratio, temperature variation, and magnetic field as well as the size-dependent parameters on the dynamic behavior are investigated. Introduction of the magnetic effect creates a hardening effect; therefore, higher values of natural frequencies are obtained while smaller values of the transverse deflections are produced. The obtained results can be useful as reference solutions for future dynamic and control analysis of FG nanobeams reinforced nanocomposites under thermomagnetic effects.

• 한국전산구조공학회:학술대회논문집
• /
• 한국전산구조공학회 2009년도 정기 학술대회
• /
• pp.38-41
• /
• 2009

Debonding behavior of symmetric tilt bicrystal interfaces with <100> misorientation axis is investigated through molecular dynamics simulations. FCC single crystal copper is considered in each grain and the model is idealized as a grain boundary under mechanical loading. Embedded-Atom Method potential is chosen to calculate the interatomic forces between atoms. Constrained tensile deformations are applied to a variety of misorientation angles in order to estimate the effect of grain boundary angle on local peak stress. A new parameter of symmetric grain-boundary structure is introduced and refines the correlation between grain boundary angle and local peak stress.

• Journal of Electrical Engineering and Technology
• /
• 제8권5호
• /
• pp.1078-1085
• /
• 2013

This paper presents a novel topology for cascaded transformer sub-multilevel converter. Eachsub-multilevel converter consists of two DC voltage sources with six switches to achieve five-level voltage. The proposed topology results in reduction of DC voltage sources and switches number. Single phase low frequency transformers are used in proposed topology and voltage transformation and galvanic isolation between load and sources are given by transformers. This topology can operate as symmetric or asymmetric converter but in this paper we have focused on symmetric state. The operation and performance of the suggested multilevel converter has been verified by the simulation results of a single-phase nine-level multilevel converter using MATLAB/SIMULINK.

• 한국산학기술학회논문지
• /
• 제20권12호
• /
• pp.614-621
• /
• 2019

이축 및 일축대칭 단면의 적층복합 보의 휨 해석과 좌굴해석을 위해 일반화된 보 요소를 제안하였다. 전단변형보 이론을 사용하여 유도된 보 요소는 휨 전단변형 및 휨 비틀림과 재료 비등방성 성질에 따른 연계성을 고려하였다. 서로 다른 단면에 대해 해석적 기법으로 구한 단면 강성계수와 함께 평면응력과 평면변형률 가정을 사용하였다. 대칭 및 역대칭 적층복합 보의 휨 거동을 조사하기 위해 뒴 변형을 포함하여 절점 당 7개의 자유도를 가진 두 가지 유형의 3절점, 4절점 보 요소를 제안하였다. 전단잠금 현상을 완화하기 위해 본 연구에서는 감차적분 기법을 사용하였다. 또한, 유도된 기하학적 블록강성을 사용하여 축방향 압축력을 받는 적층복합 보의 좌굴하중을 산정하였다. 제시한 보 요소의 정확성과 효율성을 검증하기 위해 3절점 보 요소에 근거한 결과를 다른 연구자와 ABAQUS 유한요소 해석결과와 비교하였다. 적층복합 보의 휨 거동과 좌굴하중에 대한 연계강성과 전단변형, 경계조건, 하중형태, 길이-높이 비, 적층형태의 영향을 조사하였다. 두 개의 다른 보 요소의 수렴성도 제시하였다.

• 한국군사과학기술학회지
• /
• 제13권6호
• /
• pp.1043-1050
• /
• 2010

This paper examined the probabilistic load analysis for the tailplane during pitching maneuvering in the conceptual aircraft design phase. The flight load analysis based on the probabilistic distribution of design variables are compared with the results of the deterministic analysis. Two forms of variable distribution are used in this paper. One is standard normal distribution, the other distribution is calculated from the results of short-period longitudinal equation of aircraft motion. The influence of the distribution parameter on the probabilistic load analysis was investigated and the significant design variables that have an impact on the mean and variance of probabilistic load were identified. The comparison indicates that probabilistic load analysis provides more reliable probabilistic load distribution for the structural design than the traditional deterministic analysis.

• 한국공간구조학회논문집
• /
• 제19권4호
• /
• pp.69-76
• /
• 2019

A stadium roof that uses the pin-jointed spatial truss system has to be designed by taking into account the unstable phenomenon due to the geometrical non-linearity of the long span. This phenomenon is mainly studied in the single-free-node model (SFN) or double-free-node model (DFN). Unlike the simple SFN model, the more complex DFN model has a higher order of characteristic equations, making analysis of the system's stability complicated. However, various symmetric conditions can allow limited analysis of these problems. Thus, this research looks at the stability of the DFN model which is assumed to be symmetric in shape, and its load and equilibrium state. Its governing system is expressed by nonlinear differential equations to show the double Duffing effect. To investigate the dynamic behavior and characteristics, we normalize the system of the model in terms of space and time. The equilibrium points of the system unloaded or symmetrically loaded are calculated exactly. Furthermore, the stability of these points via the roots of the characteristic equation of a Jacobian matrix are classified.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2003년도 하계학술대회 논문집 Vol.4 No.2
• /
• pp.664-668
• /
• 2003

Transducer for ultrasonic linear motor with the symmetric and anti-symmetric modes was studied. The ultrasonic linear motor consists of two Langevin type piezoelectric vibrators that cross at right angles with each other in tip. In order to excite symmetric and anti-symmetric modes, the transducer must have a phase shift of 90 degree in space and time. Therefore, the tip of transducer moves on an elliptical motion. In this paper, the finite element analysis was used to optimize dimension and displacement of the transducer. The ultrasonic motor was fabricated using the simulated result and the driving characteristics were measured. No-load velocity was 0.28[m/s] and the maximum efficiency was 30[%] in resonance frequency.

• Steel and Composite Structures
• /
• 제26권6호
• /
• pp.663-672
• /
• 2018

This paper contains a consistent couple-stress theory to capture size effects in Euler-Bernoulli nano-beams made of three-directional functionally graded materials (TDFGMs). These models can degenerate into the classical models if the material length scale parameter is taken to be zero. In this theory, the couple-stress tensor is skew-symmetric and energy conjugate to the skew-symmetric part of the rotation gradients as the curvature tensor. The material properties except Poisson's ratio are assumed to be graded in all three axial, thickness and width directions, which it can vary according to an arbitrary function. The governing equations are obtained using the concept of minimum potential energy. Generalized differential quadrature method (GDQM) is used to solve the governing equations for various boundary conditions to obtain the natural frequencies of TDFG nano-beam. At the end, some numerical results are performed to investigate some effective parameter on buckling load. In this theory the couple-stress tensor is skew-symmetric and energy conjugate to the skew-symmetric part of the rotation gradients as the curvature tensor.

• 한국산학기술학회논문지
• /
• 제13권10호
• /
• pp.4629-4635
• /
• 2012

본 연구의 목적은 중량물 들기 작업시 비대칭 무게중심과 상체 옆으로 기울임 여부가 어떻게 L5/S1 주변 허리 근육의 Peak EMG 진폭에 영향을 미치는지를 알아보는 것이다. 요통을 포함한 근골격계질환은 무겁지 않은 물체의 지속적인 반복 취급뿐만 아니라, 일회성의 커다란 부하도 신체 조직의 부담으로 작용하여 발생할 수 있다. 11명의 20대 대학생 남성은 15.8kg의 물체를 들어올리는 Task를 3회 실행하였다. 이 때 대칭 무게중심의 물체를 상체를 기울이지 않고 들어 올리는 경우, 비대칭 무게중심의 물체를 상체를 기울이지 않고 들어 올리는 조건, 그리고 비대칭 무게중심의 물체를 상체를 기울여서 들어 올리는 경우에 따라 6개의 L5/S1 주변의 근육들로부터 Peak EMG 진폭이 수집되어 분석되었다. 결과는 비대칭 무게중심을 지닌 물체 취급시 무게중심에서 먼 쪽의 허리 근육에서 Peak EMG 진폭이 발생하고, 그 진폭의 크기는 대칭 무게중심 물체를 취급하는 경우보다 크게 나타났다. 또한, 비대칭 무게중심의 물체를 취급할 경우 물체나 상체를 물체의 무게중심 방향으로 기울이는 것은 기울이지 않을 때보다 대측성 등근육에서 Peak EMG 진폭 증가시켰다. 이러한 연구 결과는 비대칭 무게중심의 중량물을 들어 올리는 작업에서 요통 발생을 예방하기 위한 행정적인 조치로써 가능하면 상체를 전두면 기준으로 기울이지 않는 작업자 자세 조언이 필요함을 말해준다.

• Structural Engineering and Mechanics
• /
• 제62권1호
• /
• pp.107-111
• /
• 2017

This paper deals with critical buckling load optimization of symmetric angle-ply laminated stepped flat columns under axial compression load. The design objective is the maximization of the critical buckling load and the design variable is the fiber orientations in the layers of the laminates. The classical laminate plate theory is used for the finite element solution of the laminated stepped flat columns. The modified feasible direction (MFD) method is used for the optimization routine. For this purpose, a program based on FORTRAN is exploited. Finally, the optimization results are presented for width ratios (b/B), ratios of fillet radius ($r_1/r_2$), aspect ratios (L/B) and boundary conditions. The results are presented in graphical and tabular forms and the results are compared.