• Information and Communications Magazine
• /
• v.18 no.6
• /
• pp.46-57
• /
• 2001

본 논문은 IMT-2000 이동통신 표준인 cdma2000 환경에서 라그랑제(Lagrange)승수를 이용한 알고리즘을 이용하여 설계한 스마트안테나 시스템을 성능 분석하였다. 본 논문에 적용한 수신안테나 시스템은 기존의 2 안테나 다이버시티(2-antenna diversity) 시스템과는 달리 선형배열안테나를 이용하여 각 안테나 소자에 대한 위상보정을 통해 최적의 수신이득을 얻는 시스템이다[1]. 본 논문에서는 안테나위상의 보정을 위해 수신신호의 자기상관행렬의 최대 고유치에 해당하는 고유벡터를 계산하는 절차를 거치며 이를 위해 라그랑제승수(Laglange Multiplier)에 기초한 알고리즘을 사용하였다[2]. 이렇게 구현된 스마트안테나 시스템을 변조심볼(Mudulation Symbol)의 SER(symbol error rate)에 대한 성능분석을 통해 cdma2000 데이터채널의 수용용량을 제시함으로써 시스템의 성능을 분석하였다.

• Advances in Computational Design
• /
• v.4 no.2
• /
• pp.155-177
• /
• 2019

Operation and Maintenance (O&M) phase is the main contributor to the total lifecycle cost of a building. Previous studies have described that Building Information Models (BIM), if available with detailed asset information and their properties, can enable rapid troubleshooting and execution of O&M tasks by providing the required information of the facility. Despite the potential benefits, there is still rarely BIM with Mechanical, Electrical and Plumbing (MEP) assets and properties that are available for O&M. BIM is usually not in possession for existing buildings and generating BIM manually is a time-consuming process. Hence, there is a need for an automated approach that can reconstruct the MEP systems in BIM. Previous studies investigated automatic reconstruction of BIM using architectural drawings, structural drawings, or the combination with photos. But most of the previous studies are limited to reconstruct the architectural and structural components. Note that mechanical components in the building typically require more frequent maintenance than architectural or structural components. However, the building mechanical drawings are relatively more complex due to various type of symbols that are used to represent the mechanical systems. In order to address this challenge, this paper proposed a symbol recognition framework that can automatically recognize the different type of symbols in the building mechanical drawings. This study applied vector-based computer vision techniques to recognize the symbols and their properties (e.g., location, type, etc.) in two vector-based input documents: 2D drawings and the symbol description document. The framework not only enables recognizing and locating the mechanical component of interest for BIM reconstruction purpose but opens the possibility of merging the updated information into the current BIM in the future reducing the time of repeated manual creation of BIM after every renovation project.

• Journal of the Institute of Electronics Engineers of Korea TC
• /
• v.38 no.3
• /
• pp.9-18
• /
• 2001

In this paper, we present the joint symbol detection and channel estimation for an orthogonal frequency division multiplexing (OFDM) system in fading channels. The proposed methods are based on decision-directed channel estimation (DDCE) method and their symbol detection is achieved by using Viterbi algorithm. This Viterbi decision-directed channel estimation (VDDCE) method tracks time-varying channels and detects a maximum likelihood symbol sequence. Recursive Viterbi decision-directed channel estimation (RVDDCE) method based on VDDCE method is proposed to shorten the detecting depth. In this method, channel estimate and Viterbi processing are recursively performed every interval of training symbol. Also, average chann'el estimation (ACE) technique to reduce the effect of additive white Gaussian noise (AWGN) is applied VDDCE method and RVDDCE method. These proposed methods arc demonstrated by computer simulation.

• Journal of the Korean Society of Costume
• /
• v.59 no.2
• /
• pp.143-153
• /
• 2009

The purpose of this study is to provide color information in order to planning and merchandising in china fashion through the color of Beijing opera. In objective study, we collect total 302 Beijing opera images. The collecting method of source data is to extract digital color data by color picker. We transform RGB color data to H V/C, CIE L*a*b and analyze the attributes of color and tone, three-dimensional analysis. The results of this study are as follows : 1. The color distrbution of Beijing opera is R(26.9%)>YR(18.2%)>PB(11.6%)>Y(9.6%). Traditional preference color, red is most popular color as 26.7%:, the practice of vivid tone red is numerous. 2. The tone distribution of Beijing opera costume is P(16%)>It(13.9%)>d(11%)>5(9.6%)>4kg (8.2%)>b(7.1%:). The value o# Beijing opera costume distribute medium and medium-high and the chroma of those distributes low. 3. High chroma yellow is restrictive color as the symbol of emperor in china but medium-low chroma yellow is very frequently used. 4. Blue is often used in china costume. Especially in Beijing opera costume blue is symbol of bravery, dignity, cruel character 5. White in Beijing opera costume is much used for symbol of righteous loyalist. Black is less used than white in Beijing opera costume and black is authority color for symbol of the prime minister.

• Journal of Communications and Networks
• /
• v.9 no.3
• /
• pp.265-273
• /
• 2007

This paper expands an analytical performance model of 802.11 to accurately estimate throughput and energy demand of 802.11-based wireless sensor network (WSN) when sensor nodes employ Reed-Solomon (RS) codes, one of block forward error correction (FEC) techniques. This model evaluates these two metrics as a function of the channel bit error rate (BER) and the RS symbol size. Since the basic recovery unit of RS codes is a symbol not a bit, the symbol size affects the WSN performance even if each packet carries the same amount of FEC check bits. The larger size is more effective to recover long-lasting error bursts although it increases the computational complexity of encoding and decoding RS codes. For applying the extended model to WSNs, this paper collects traffic traces from a WSN consisting of two TIP50CM sensor nodes and measures its energy consumption for processing RS codes. Based on traces, it approximates WSN channels with Gilbert models. The computational analyses confirm that the adoption of RS codes in 802.11 significantly improves its throughput and energy efficiency of WSNs with a high BER. They also predict that the choice of an appropriate RS symbol size causes a lot of difference in throughput and power waste over short-term durations while the symbol size rarely affects the long-term average of these metrics.

• Smart Media Journal
• /
• v.7 no.2
• /
• pp.23-33
• /
• 2018

A musical sheet is read by optical music recognition (OMR) systems that automatically recognize and reconstruct the read data to convert them into a machine-readable format such as XML so that the music can be played. This process, however, is very challenging due to the large variety of musical styles, symbol notation, and other distortions. In this paper, we present a model for the recognition of musical symbols through the use of a mobile application, whereby a camera is used to capture the input image; therefore, additional difficulties arise due to variations of the illumination and distortions. For our proposed model, we first generate a line adjacency graph (LAG) to remove the staff lines and to perform primitive detection. After symbol segmentation using the primitive information, we use a covariance-matching method to estimate the similarity between every symbol and pre-defined templates. This method generates the three hypotheses with the highest scores for likelihood measurement. We also add a global consistency (time measurements) to verify the three hypotheses in accordance with the structure of the musical sheets; one of the three hypotheses is chosen through a final decision. The results of the experiment show that our proposed method leads to promising results.

• Korean Journal of Human Ecology
• /
• v.9 no.3
• /
• pp.371-382
• /
• 2000

Fashion, a means of communication, is the symbol conveying the social information and the individual identity. The opulence of material and the development of civilization make the sign of fashion variable and individual; especially, The importance of hair style among the today's sign of fashion, as a determinant element in judging each person's look is emphasized. Kitsch, based on the variety and the individuality is the manner of art in diverse hobbies. In addition, it enlarges the sphere of modern an, creates new open aesthetic world. Therefore, we need to understand the symbol of Kitsch aestetic represented in hair style, which is meaningful. The method of this study is quality analysis by means of semiology, aesthetics, Fashion artical, magazine, atc. To support this statement, we will study the form, a primary symbol, and the ideology, a secondly one in $\ulcorner$Mythologies$\lrcorner$ of Roland Bartes(1972). Then by means of the form and the ideology, we will try to recognize the myth, an essential symbol. The result of this study is following like these three points. First, the Kitsch patterns of representation in hair style use the accumulation by an excessive ornamentation; the inappropriateness by the lack of form, the disagreement, the unbalance, and the nonfunctional form; and finally, the amusement by the reconstruction, the exotic, and the satire. The above three is true to the Barthes's primary symbol-the form. Second, the anti-traditionality(including the lack of form, the disagreement, and the unbalance), the homesickness(including the reconstruction and the exotic), and the eclecticism(including the parody and the mixed imitation) are created as the ideology of the liberal artistic notion, different from the past outlooks on aesthetic. This is true to the Barthes's secondly symbol-the ideology. Third, the form and the ideology enable us to express our own thoughts and to recover the humanity, which is the primary purpose of Kitsch aesthetic. The Kitsch hair style, as we witness, does lead the varied and liberal aesthetic world, create its accessible value, and place the art of hair style in a higher status.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.41 no.11
• /
• pp.1406-1409
• /
• 2016

In this paper, we propose the heuristic signal grouping algorithm to estimate channel state value over full blind communication situation which means that there is no information about the modulation scheme and the channel state information between the transmitter and the receiver. Hereafter, using the constellation rotation method and the probability density function(pdf) the modulation scheme is determined to perform automatic modulation classification(AMC). Furthermore, the modulation type and a channel state value estimation capability is evaluated by comparing the proposed scheme with other conventional techniques from the simulation results in terms of the symbol error rate(SER) and the root mean square error (RMSE).

• Journal of the Institute of Electronics and Information Engineers
• /
• v.54 no.7
• /
• pp.12-18
• /
• 2017

This paper presents a Dijkstra's-search-based sphere decoding (SD) algorithm with limited complexity for the symbol detection in MIMO communication systems. The Dijkstra search-based SD is efficient to achieve a near-optimal error rate in the MIMO symbol detection, but has a critical problem in that its complexity is variable and can correspond to that of the exhaustive search in the worst case. The proposed algorithm limits the computations while achieving a near-optimal error rate. Simulation results show that the error rate is near optimal even with the limited complexity.

• Journal of the Institute of Electronics and Information Engineers
• /
• v.51 no.6
• /
• pp.290-297
• /
• 2014

The synchronization of OFDM receiver is consisted of symbol timing offset(STO) estimation in time domain and carrier frequency offset(CFO) estimation in frequency domain. This paper proposes new algorithm for correcting the integer CFO after we have done correcting the STO and partial CFO. ICFO must be corrected, since the ICFO lead to degrade bit error rate(BER) of demodulation performance. The PN sequence has information which is subcarrier order since the modified PN sequence, length is same subcarrier, is used in this paper and is modulated each subcarrier by each chip. Thus the receiver track phase of PN sequence after FFTin order to find the subcarrier frequency offset. The proposed algorithm is faster and more simple than convenient methode as measuring carrier energy.