• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.16 no.3
• /
• pp.1707-1714
• /
• 2015

The neural bases underlying within or between-language picture naming was investigated by using event-related fMRI. The present suudy explorered the following two goals: The first is to compare cortical activation areas relevant to naming process in native and foreign language, and to decide whether the activation pattern of the foreign word will be the same as native words or not. The next is to find the cerebral areas involved only in alternating language switching between native and foreign language condition. Differential activation patterns were observed for language switching against one-language. Both naming tasks all activated the left inferior frontal gyrus (LIFG) as expected. However the differences in naming between languages were reflected in the activation amount of the LIFG, namely more activation in naming the native language than the foreign language. Especially, naming of the foreign word from English showed the similar area and size in activation with native language suggesting that the process of borrowed noun resembles that of native common noun. And the language switching between languages newly activated the right middle frontal gyrus as well as the left inferior frontal areas. The right middle frontal gyrus engagement in switching conditions obviously identified that right hemisphere is recruited in code switching possibly with respect to meta-cognition controlling language index at a subconscious level.

• The Journal of Advanced Prosthodontics
• /
• v.9 no.1
• /
• pp.31-37
• /
• 2017

PURPOSE. The purpose of this study was to analyze the influence of the platform switching concept on an implant system and peri-implant bone using three-dimensional finite element analysis. MATERIALS AND METHODS. Two three-dimensional finite element models for wide platform and platform switching were created. In the wide platform model, a wide platform abutment was connected to a wide platform implant. In the platform switching model, the wide platform abutment of the wide platform model was replaced by a regular platform abutment. A contact condition was set between the implant components. A vertical load of 300 N was applied to the crown. The maximum von Mises stress values and displacements of the two models were compared to analyze the biomechanical behavior of the models. RESULTS. In the two models, the stress was mainly concentrated at the bottom of the abutment and the top surface of the implant in both models. However, the von Mises stress values were much higher in the platform switching model in most of the components, except for the bone. The highest von Mises values and stress distribution pattern of the bone were similar in the two models. The components of the platform switching model showed greater displacement than those of the wide platform model. CONCLUSION. Due to the stress concentration generated in the implant and the prosthodontic components of the platform switched implant, the mechanical complications might occur when platform switching concept is used.

• Journal of Power Electronics
• /
• v.16 no.4
• /
• pp.1306-1315
• /
• 2016

Modern power systems driven by high-power converters have become inevitable in view of the ever increasing demand for electric power. The total power loss can be reduced by limiting the switching losses in such power converters; increased power efficiency can thus be achieved. A reduced switching frequency that is less than a few hundreds of hertz is applied to power converters that produce output waveforms with high distortion. Selective harmonic elimination pulse width modulation (SHEPWM) is an optimized low switching frequency pulse width modulation method that is based on offline estimation. This method can pre-program the harmonic profile of the output waveform over a range of modulation indices to eliminate low-order harmonics. In this paper, a SHEPWM scheme for three-phase three-leg neutral point clamped inverter is proposed. Aside from eliminating the selected harmonics, the DC capacitor voltages at the DC bus are also balanced because of the symmetrical pulse pattern over a quarter cycle of the period. The technique utilized in the estimation of switching angles involves the firefly algorithm (FA). Compared with other techniques, FA is more robust and entails less computation time. Simulation in the MATLAB/SIMULINK environment and experimental verification in the very large scale integration platform with Spartan 6A DSP are performed to prove the validity of the proposed technique.

• The Transactions of the Korean Institute of Electrical Engineers B
• /
• v.48 no.12
• /
• pp.691-700
• /
• 1999

This paper proposes a novel switching strategy of 1Mvar STATCON using cascade multilevel H-bridge inverter(HBI) for FACTS application. To control the reactive power instantaneously, the d-q dynamic system model is described and analyzed. A single pulse pattern based on the SHEM(Selective Harmonic Elimination Method) technique is determined from the look-up table to reduce the line current harmonics and a rotating fundamental frequency switching scheme is presented to adjust the DC voltage of each inverter capacitor at the same value. So the voltage unbalance problem between separately DC bus voltage is improved by using the proposed switching scheme. As a result, the presented inverter configuration not only reduces the system complexity by eliminating the isolation at the AC input side transformer but also improves the dynamic response to the step change of reactive power.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• v.8 no.9
• /
• pp.2982-3003
• /
• 2014

With the explosive deployment of the wireless communications technology, the increased QoS requirement has sparked keen interest in network planning and optimization. As the major players in wireless network optimization, the BS's resource utilization and mobile user's QoS can be improved a lot by the load-balancing technology. In this paper, we propose a load-balancing strategy that uses Coordinated Multiple Points (CoMP) technology among the Base Stations (BS) to effectively extend network coverage and increase edge users signal quality. To use universally, different patterns of load-balancing based on CoMP are modeled and discussed. We define two QoS metrics to be guaranteed during CoMP load balancing: call blocking rate and efficient throughput. The closed-form expressions for these two QoS metrics are derived. The load-balancing capacity and QoS performances with different CoMP patterns are evaluated and analyzed in low-dense and high-dense traffic system. The numerical results present the reasonable CoMP load balancing pattern choice with guaranteed QoS in each system.

• ETRI Journal
• /
• v.31 no.3
• /
• pp.318-320
• /
• 2009

A switchable Yagi-Uda antenna prototype with radiation pattern reconfiguration is presented in this letter. The proposed reconfigurable antenna is based on the concept of switching between the reflector and director of a Yagi-Uda antenna using a radio frequency PIN diode. As a result, the minimum/maximum radiation can be steered towards desired signals or away from interfering signals in opposite directions. The measured 10 dB impedance bandwidth and gain are 210 MHz (7%) and 8.02 dBi at 3 GHz, respectively. Details of the antenna design and its performance are described and empirically analyzed.

• Proceedings of the Korean System Dynamics Society
• /
• 2004.02a
• /
• pp.19-52
• /
• 2004

This study aims to grasp invisible yet dynamic systemic structure that influences the general procedure of national R＆D investment system in Korea using "system dynamic methods and to suggest policy lever. Various conflicting situations, 'R＆D investment paradoxes' in myopia investment and principal-agent problems etc, arise when the government decides R＆D investment area and makes indispensable choice. Difficulty in the decision can be amplified due to misalignments among decision on adequate amount of R＆D investment ("strategic loop"), R＆D system ("structural loop") and acceptance and realization by R＆D laboratories and theirs researcher ("efficacy loop"). Results of modeling and simulation of korea national R＆D investment system with consideration of three causal loops show the switching pattern dynamically, in which form of technologies shifts from one to another stage like paradigm shift, when the R＆D investment reaches a certain stork. R＆D investment increases are directly not liked to R＆D productivities because of delays and side effects during transition periods between different stages of technology development. Thus, It is necessary to develope strategies in order to enhance efficiency of technological development process by perceiving the switching pattern.

• Journal of Power Electronics
• /
• v.16 no.3
• /
• pp.1087-1096
• /
• 2016

This paper reports an investigation conducted on two diagnostic methods based on the switching voltage pattern of IGBT open-circuit faults in voltage-source inverters (VSIs). One method was based on the bridge arm pole voltage, and the other was based on bridge arm line voltage. With an additional simple circuit, these two diagnostic methods detected and effectively identified single and multiple open-circuit faults of inverter IGBTs. A comparison of the times for the diagnosis and anti-interference features between these two methods is presented. The diagnostic time of both methods was less than 280ns in the best case. The diagnostic time for the method based on the bridge arm pole voltage was less than that of the method based on the bridge arm line voltage and was 1/2 of the fundamental period in the worst case. An experimental study was carried out to show the effectiveness of and the differences between these two methods.

• The Transactions of the Korean Institute of Electrical Engineers
• /
• v.39 no.3
• /
• pp.263-272
• /
• 1990

In the variable speed driving system of a three phase induction motor controlled by a PWM inverter, the output terminal contains considerable amount of harmonic components of the voltage waveform due to the switching action of semiconductor devices, causing torque ripples, acoustic noise and oscillation of the motor. This paper describes a new algorithm which eliminates the harmonics and controls the fundamental voltage in three phase PWM inverter output waveform. The new algorithm utilizes the technique of particular harmonics elimination (PHE) by walsh series in three phase PWM inverter output waveform. A microprocessor (8086 CPU)-controlled three phase induction motor system is described to realize this algorithm. The system is designed for 3 phase output voltage in the 1-60Hz interval where 5th and 7th harmonics, and 5th, 7th, 11th, and 13th harmonics are eliminated. Also, the fundamental wave amplitude is designed to be proportional to the output frequency. The performance of the proposed method shows sufficient elimination of the harmonics and also reduction of computation time which determines switching pattern. The proposed PWM pattern by Walsh series, is effective not only to induction motors but also to other electromagetic equipments such as voltage regulators and UPS.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.5 no.4
• /
• pp.791-797
• /
• 2001

In this paper, high-speed ,large-capacity ATM switching-chip is developed by MCM technology. MCM technology is suited for light-weight portable communications, mobile computing, high-frequency applications. For test of the developed MCM switching-chips, the simulating model is made by VHDL code of previously developed chip and input-output values of modeling pattern are obtained through the simulation. After the pattern values in chip-test machine are inserted , their results are compared with the simulation results. The design in this paper is simulated by synopsys design tool using SUN workstation and functions of chip is measured by TRILLIUM machine. Simulated and measured results have been compared, showing close agreement. Last, the MCM technique presented in this paper will provide useful insight into future designs.