• 대한전기학회:학술대회논문집
• /
• 대한전기학회 1995년도 하계학술대회 논문집 A
• /
• pp.318-320
• /
• 1995

This paper describes the practical implementation of switched reluctance motor drive for a wide range of operation speeds. The angle controller is designed by one-chip microprocessor 8051 for various real time applications. Algorithm to control the speed of SRM and to maintain the speed under the changed load is proposed.

• Journal of international Conference on Electrical Machines and Systems
• /
• 제1권4호
• /
• pp.477-482
• /
• 2012

This paper describes a new rotor position sensorless control method for SRM drives based on an improved simplified flux linkage method. In the traditional simplified flux linkage method, every phases take turns conduction and current chopping control method is used. Every phases take turns conduction means turning on the incoming working phase while turning off the working phase. This conduction mode causes coupling between turn-on and turn-off angles, which goes against optimal efficiency or torque ripple minimization with sensorless speed control. In the improved simplified flux linkage method, turn-off angle is calculated by flux loop, the turn-on angle can be given arbitrarily and has no relations with the turn-off angle, and the current chopping control method is used. The speed and rotor position can be estimated then. Finally, a sensorless SRM speed control system and an experiment platform with DSP are built and validity of this method is confirmed.

• Journal of Advanced Marine Engineering and Technology
• /
• 제40권4호
• /
• pp.348-352
• /
• 2016

본 논문은 적정 전압 여자를 적용한 스위치드 릴럭턴스 전동기의 효율 개선에 대하여 기술한다. 세탁기와 같이 적용 속도에 큰 차이가 있는 부하의 경우 일정한 직류링크전압으로는 효율 개선에 어려움이 있다. 저속운전영역에서 과도한 직류전압의 영향을 줄이기 위해 보통 사용되고 있는 구동회로내의 다이오드 정류기 대신 SCR을 사용한 AC-DC 컨버터가 SRM 드라이버에 포함된다. AC-DC 컨버터는 저속에 알맞은 적정한 여자전압을 공급한다. 실험결과를 통하여 저속영역에서 효율이 개선됨을 확인하였다.

• 한국산학기술학회논문지
• /
• 제13권10호
• /
• pp.4751-4756
• /
• 2012

브러쉬형 모터는 여러 가지 전기기계 및 가전제품에서 미세먼지와 유해물질을 발생시키는 것으로 알려졌다. 그래서 브러쉬가 없는 형태의 모터가 브러쉬형 모터를 대신하여 친환경적인 대안으로 제안되었다. 또한 BLDC 모터의 값비싼 마그넷 회전자는 SRM형으로 대치되고 있는데 SRM은 시스템의 허용범위 내에서 전류값이 넘지 않도록 해야하는 제어를 요구한다. 본 논문에서는 SRM형 BLDC 모터를 사용하여 고속회전을 제어하기위한 경제적인 제어기와 효율적인 접근방법을 소개한다.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2015년도 제46회 하계학술대회
• /
• pp.673-675
• /
• 2015

This paper presents a design of a high speed 2-phase 6/5 switched reluctance motor (SRM) for an air-blower application. This type of motor is suitable for the applications that require high speed and only one directional rotation as air-blower. The desired air-blower is unidirectional application, and requires a wide positive torque region without torque dead-zone. In order to get a wide positive torque region without torque dead-zone during phase commutation, asymmetric inductance characteristic with non-uniform air-gap is considered. The proposed motor can be operated at any rotor position. The proposed 6/5 SRM uses short flux path technique that achieved by means of winding configuration and lamination geometry. The purpose of short flux path is to reduce the core loss and the absorption MMF in the stator. The proposed 2-phase 6/5 SRM is verified by finite element method (FEM) analysis and Matlab-Simulink. In order to verify the design, a prototype of the proposed motor was manufactured for practical system.

• Journal of Electrical Engineering and Technology
• /
• 제13권5호
• /
• pp.1978-1985
• /
• 2018

In this paper, a novel single-phase hybrid switched reluctance motor (HSRM) is proposed for hammer breaker application. The hammer breaker requires only unidirectional rotation and high-speed operation. To satisfy the requirements and eliminate torque dead-zone, the rotor of the proposed 4/4 poles SRM is designed with wider pole arc and non-uniform air-gap. This motor has a simple structure and produces low torque ripple. Permanent magnets (PMs) are mounted on the inner stator at a certain position which enables it to park the rotor for self-start and create positive cogging torque in the torque dead-zone. Compared with conventional single-phase switched reluctance motor, HSRM has an increased torque density and relatively low torque ripple. To verify effectiveness, finite element method (FEM) is employed to analyze the performance of the proposed structure. Then, the proposed motor is compared with the existing motor drive system for the same application. The proposed HSRM is easy to manufacture along with competitive performance.

• Journal of Power Electronics
• /
• 제11권1호
• /
• pp.37-44
• /
• 2011

In this paper, a four-phase 8/6-pole 4-kW SR motor drive model is presented. Based on experimental data, the model allows an accurate simulation of a drive in dynamic operation. Simulations are performed and a laboratory type set-up is built based on a TI TMS320F2812 platform to experimentally verify the theoretical results obtained for a SR motor. To reduce acoustic noise and to correct the power factor of this drive, a two-stage power converter is proposed that uses a current source rectifier (CSR) as the input stage for the asymmetrical converter of the studied SRM. Employing the space-vector modulation (SVM) method in matrix converters, the CSR switching allows the dc link's capacitors to be eliminated and the power factor of the SRM drive to be improved. As the electrical motive force (emf) is directly proportional to the rotor speed, the input voltage to the machine can be programmed to be a function of the speed with the modulation index of the CSR, leading to a reduction in the acoustic noise of the SRM drive. Simulation of the whole SRM drive system is performed using MATLAB-Simulink. The results fully comply with the required conditions such as power factor correction with an improvement in the THD.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 1996년도 추계학술대회 논문집 학회본부
• /
• pp.302-304
• /
• 1996

In this paper, a new algorithm for sensorless speed control of switched reluctance motor (SRM) is proposed. It is based on the measurement of initial rate of change of phase current. The initial rate of rise of phase current mainly depends up on the phase inductance at the time instant when the phase is excited. Therefore, the measurement of initial di/dt permits rotor position estimation, which is used to trigger the next phase. In the proposed technique, there is no need to generate additional current pulses when a phase is not excited. Therefore, this scheme does not introduce the unwanted braking torque. Also, only one current measurement is made every time a phase is excited. This reduces the computational load on the micro-controller and enhances the speed range of the sensorless drive. By using this scheme it is possible to implement the sensorless control of SRM using low cost micro-controller.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2001년도 하계학술대회 논문집 B
• /
• pp.1197-1199
• /
• 2001

TFM(Transeverse Flux Motor) is switched reluctance motor with new structure of novel design concept based on the high efficiency and power density compare to induction motor used on wide industrial field. This paper realized FWM asymmetric converter drive control system for TFM using IGBT and DSP.

• 전력전자학회:학술대회논문집
• /
• 전력전자학회 2004년도 전력전자학술대회 논문집(2)
• /
• pp.997-1000
• /
• 2004

The mathematical models of the Switched Reluctance machine system integrating the state equation of the phase current with the two dimensions finite element model of the machine are advanced, no matter what the topologies of the main circuit of the power converter and the control strategies are adopted in the system. Based on the mathematical models, the comparison of the simulated and the tested results of a three-phase Switched Reluctance motor drive prototype system are given. The simulated results of the prototype tally with the tested results of the prototype. It is shown that the mathematical models have the advantage in high precision.