• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2000년도 하계학술대회 논문집 A
• /
• pp.159-161
• /
• 2000

This paper presents a GA for service restoration in electric power distribution systems. The aim of the service restoration is to restore service with maximizing the amount of total load restored while minimizing the number of required switch operation when a fault or overload occurs in distribution system. This paper develops GA for service restoration problem with constrained multi-objective optimization problem. The results show the effectiveness of the proposed method for solving the problem.

• 조명전기설비학회논문지
• /
• 제23권10호
• /
• pp.75-80
• /
• 2009

IED가 GOOSE를 통해 전달하는 메시지가 일반적으로 변전소의 보호와 제어를 담당하는 중요하고 민감한 신호이다 보니 네트워크의 이상 상황으로 인한 통신패킷의 손실과 전송속도 저하 등에 대처하기 위한 네트워크 이중화(Redundancy)를 고려하고 있다. 이를 위해 네트워크 토폴로지의 이중화와 함께 IED도 네트워크 포트를 2개로 구현하여 스위치방식에 의한 이중화를 지원하고 있다. IEC 61850 GOOSE 적합성 시험은 IED 통신서비스 기능시험에 국한하기 때문에 본 논문에서는 변전자동화시스템의 네트워크 이중화를 고려한 IED의 스위치 이중화 장치의 GOOSE 전송 성능을 시험할 수 있는 방법을 제시하고 실계통에 적용중인 IED의 사례 검증을 통해 네트워크 이중화를 고려한 IED의 GOOSE 전송이 변전자동화시스템에 어떤 영향을 주는지 분석하고자 한다.

• 한국진공학회:학술대회논문집
• /
• 한국진공학회 1999년도 제17회 학술발표회 논문개요집
• /
• pp.188-188
• /
• 1999

The embedded atom method (EAM) of Daw and Baskes as a semiempirical method, has been successfully applied to the fcc or nearly filled d-band transition metals due to its computational feasibility and its methodological simplicity. Then Baskes modified the EAM (MEAM) to include directional bonding and applied it to metals, semiconductors, and diatomic gases, all of which have different types of bondings. Here, we present a detailed study of the energetics of adsorption on the fcc(111) surfaces and binary system within the framework of MEAM. In adsorption on fcc(111) surfaces, there are two energetically favored sites, so called, fcc site and hcp site, which may trigger stacking fault in the growth of films and might switch growth mode between 3D growth and layer by layer growth. We scrutinized the role of the hcp sites, which would offer dynamic growth pathways although the dynamics are not yet clear within the limited experimental resolution. Featuring these transient motions in the atomic level should contribute to the understanding the growth mechanisms on fcc(111) surface. And we also applied MEAM for initial stage energetics at the Cr coverage of sub- monolayer on W(110). We hope that recently observed extraordinary growth behavior at the Cr coverage of 0.7 monolayer, self- organized nano-scale lines, can be resolved in this MEAM binary system calculation.

• 한국전기전자재료학회논문지
• /
• 제25권1호
• /
• pp.68-75
• /
• 2012

This paper presents a comparative analysis of the parallel operation of different switches in a DC/DC converter. In high power applications, multi-switch PWM power conditioners may be preferred despite a higher component count, due to the absence of low frequency filters, reduced switching losses and fault tolerance. The paper demonstrates how current sharing (CSH) and time sharing (TSH) lead to the reduction of switching stress in the parallel operation of switches in any converter. The solutions proposed in this study can be applied on different scales to other power conditioners for DC/DC converter systems. Discussions of the concepts, hypotheses and computer simulations are verified by 1 kW experimental results.

• 전기학회논문지
• /
• 제60권1호
• /
• pp.36-42
• /
• 2011

This paper mainly proposes the protective coordination scheme of the microgrid system. The microgrid protection is identical to the conventional protection system separating the normal part and contingency part to reduce damage when the contingency occur at power cables, facilities. But they are different in the protection type. The conventional protection system only considers unidirectional current. However the microgrid protection should be considered not only unidirectional current but also backfeed current because various microsources and loads are installed in the microgrid system. In case the contingency occurs in microsource, when microgrid is interconnected to grid, the protection system should be configured to not separate microgrid from grid before the microsource is isolated to microgrid. And in case of fault occur in power system, the microsources should not isolated to microgrid before the static switch at PCC is tripped to separate from power system. Considering these characteristic of microgird, this paper proposes the protective coordination scheme of microgrid and implemented the on-line real time monitoring system. Especially in case the microgrid is connected to low voltage distribution system with 220/380V voltage level, the proposed protection method with power IT technology can solve the problems when the existing protective devices only applied to the microgrid system.

• 한국안전학회지
• /
• 제26권1호
• /
• pp.8-14
• /
• 2011

Noise and vibration are likely to disturb the sensory system of human body leading to psychological stress and thereby property damage. In this research, a cut out switch(COS) with a built-in acoustic absorber along with a COS fuse broken was developed to reduce percussion noise. This new system is based on a design approach that combines existing absorber systems: expansion type, resonator type, and acoustic absorber type silencer The noise performance of the new system was simulated using the $SYSNOISE^{TM}$ software under optimized parameters: the diameter of perforated plate 2 mm, the plate thickness 3 mm, the width of expansion room 25 mm, the impinging vortex room 14 mm, and the noise absorbtion room 10 mm. The results showed that it reduced noise by approximately 41.1 dB compared to the current systems available in the market. Furthermore, it showed reduced noise by approximately 12 dB more than a product with an acoustic absorber of the Fault Tamer(USA).

• 한국기계가공학회지
• /
• 제20권12호
• /
• pp.85-91
• /
• 2021

In our daily life, artificial intelligence performs simple and complicated tasks like us, including operating mobile phones and working at homes and workplaces. Artificial intelligence is used in industrial technology for diagnosing various types of equipment using the machine learning technology. This study presents a fault mode effect analysis (FMEA) of start motors using machine learning and big data. Through multiple data collection, we observed that the primary failure of the start motor was caused by the melting of the magnetic switch inside the start motor causing it to fail. Long-short-term memory (LSTM) was used to diagnose the condition of the magnetic locations, and synthetic data were generated using the synthetic minority oversampling technique (SMOTE). This technique has the advantage of increasing the data accuracy. LSTM can also predict a start motor failure.

• 드라이브 ㆍ 컨트롤
• /
• 제15권4호
• /
• pp.30-38
• /
• 2018

Electronic control units (ECUs) are currently popular, and have evolved further towards the high-end application of autonomous vehicles in the automotive industry. Such digital technologies have also become widespread, in agriculture and construction equipment. Likewise, transmission control of high-speed tracked vehicles is based on the transmission control unit (TCU), performing complex gear change control functions, and diagnostic algorithms (a TCU's self-diagnostic and reporting capability of malfunction data through CAN communication). Since all functions of TCU are implemented by embedded-software, it is hardly possible to analyze specifications by reverse engineering. In this paper a real-time transmission simulator adaptable to TCU is presented, for analysis of diagnosis algorithm and standards. Signal simulation circuits are deliberately designed considering electrical characteristics of TCU inputs and various analysis tools, such as analog input auto scan function, and global output enable switch, are implemented in software. Test results from hardware-in-the-loop simulator verify tolerance time for each error, as well as cause of fault, error reset conditions.

• 한국철도학회논문집
• /
• 제18권5호
• /
• pp.439-446
• /
• 2015

분기기 시스템은 열차진로방향을 결정하는 핵심 시스템이면서 가장 취약한 시스템이다. 이 시스템의 고장은 열차지연 및 인명사고로 이어질 수 있어 항상 상태를 정밀하게 진단해야할 필요성이 크다. 기존 한국 철도에서는 이를 위해 독일의 로드마스터가 운용되고 있지만, 국내 철도 환경에 적합한 유지보수를 통한 최적의 분기기 시스템 운영을 위해서 새로운 분기기 진단 시스템의 개발이 요구된다. 본 논문에서는 대표적인 분기기 시스템 고장에 대한 FTA를 수행하고, 각 부품 및 기능에 따라 고장 원인이 될 수 있는 물리량을 분류하였다. 이를 기반으로 모니터링을 위한 측정인자 도출과 함께 의사 결정 방안을 제시하여, 기존 시스템보다 상세한 데이터들을 제공할 수 있는 새로운 분기기 진단 시스템을 제안하였다.

• 한국정보과학회논문지:시스템및이론
• /
• 제27권5호
• /
• pp.485-495
• /
• 2000

대규모의 업무처리나 복잡한 연산을 요구하는 응용 분야에서는 프로그램의 병렬화를 이용하는 병렬 컴퓨터 시스템이 요구되고 있다. 이 병렬 컴퓨터 시스템의 핵심 작업 중 하나가 동기화이다. 동기화 작업 중 가장 대표적인 방법이 장벽 동기화인데 이 방법은 동기화에 참여하는 모든 프로세서들이 모두 장벽에 도달할 때까지 다음 작업을 진행사킬 수 없게 만드는 것이다. 장벽 동기화는 소프트웨어에 의한 방법, 하드웨어에 의한 방법, 그리고 그 두 가지가 결합된 방법 등이 있는데 이 중에서 하드웨어에 의한 방법이 가장 빠르고 start-up overhead가 적다는 장점으로 인하여 널리 쓰이는 추세이다. 본 논문에서는 하드웨어에 의한 방법 중에서 간단한 오류를 해결할 수 있고 보다 빠른 동기화를 가능하게 하는 새로운 스위치 모듈을 제안한다. 새로운 스위치 모듈과 더불어 제안하는 장벽 동기화는 기존에 제안되었던 방법에 비해서 스위치에 모든 것을 의존하는 방식이 아니라 프로세서에 의해 동작되는 부분이 많기 때문에 적은 하드웨어 비용을 들이고서 효과적인 장벽 동기화를 실행한다. 새로 제안하는 장벽 동기화는 어떠한 망의 구조에서도 구현될 수 있게 설계되었다 . 본 논문에서는 MIN에서의 장벽 동기화에 대한 비교만을 성능 평가하였는데 24.6% - 24.8%의 평균 지연 시간의 감소를 보였다. 하지만 임의의 망인 비정규적인 망에서 보다 나은 성능 향상을 보일 것을 기대한다.