• Journal of IKEEE
• /
• v.24 no.1
• /
• pp.170-177
• /
• 2020

This paper presents an open-fault tolerance control method for active neutral point clamped (ANPC) inverter with high frequency/low frequency (HF/LF) modulation. By applying the ANPC inverter with SiC MOSFETs and Si IGBTs, the system efficiency and performance can be improved compared to a Si-based inverter. HF/LF modulation is used for a megawatt-scale inverter to minimize the commutation loop. The open-switch failure in megawatt-scale inverter causes severe damage to load and huge expenses when the inverter has been shut-down. The proposed tolerance control of open-switch failure provides continuous operation and improved reliability to the ANPC inverter. The effectiveness of the proposed fault tolerance control is verified by simulation results.

• Journal of the Korea Computer Industry Society
• /
• v.2 no.4
• /
• pp.547-564
• /
• 2001

In this paper a simulation has been performed to compare and evaluate the performance between the EPRCA(Enhanced Proportional Rate Control Algorithm) and EMRCA(Explicit Max_min Rate Control Algorithm) switches. The variation of the ACR at the source end system, the queue length, the utilization rate of the link bandwidth and the share fairness at the transient and steady states are used as the evaluation criteria for the simulation. The EMRCA switch is more stable than the EPRCA switch and reduces its buffer size. Also, it achieves a higher utilization rate of the link bandwidth than the EPRCA switch. The hardware complexity of the EMRCA switch is significantly lower than the EPRCA and other rate-based switches. Since it eliminates the necessity of the floating-point operation for calculation of the MACR(Mean Allowed Cell Rate) at the switch.

• Journal of Power Electronics
• /
• v.14 no.6
• /
• pp.1157-1165
• /
• 2014

The T-type topology is a three-level topology that has an advantage in terms of its number of switching device and its efficiency when compared to the neutral-point clamped (NPC)-type topology. With the recent increase in the usage of the T-type topology, the interest in its reliability has also increased. Therefore, a tolerance control for a T-type rectifier is necessary to improve the reliability of applications when an open-switch fault occurs. NPC-type rectifiers cannot eliminate input current distortion completely. However, the T-type rectifier is able to restore distorted current. In this paper, a tolerance control for the $S_{x2}$ and $S_{x3}$ open-switch faults of a T-type rectifier is proposed where it is advantageous in terms of efficiency when compared with other tolerance controls. The performance of the proposed tolerance control is verified through simulation and experimental results.

• Bulletin of the Korean Chemical Society
• /
• v.30 no.6
• /
• pp.1337-1340
• /
• 2009

Electrical properties of a fluorinated carbon black (CB)-filled high-density polyethylene (HDPE) polymeric switch were investigated as a function of fluorination pressure at 0.1 ~ 0.4 MPa. From the FT-IR results, the absorption spectra of the fluorinated CB show an absorption band at 1400 ~ 1000 $cm^{-1}\;for\;{\nu}_{C-F}$ and the peak intensity increased with increasing fluorination pressure. Also, the analysis of XPS spectra of the fluorinated CB indicated that fluorine content increased with increasing fluorination pressure. Meanwhile, the surface free energy of the fluorinated CB decreased with increasing fluorination pressure. Consequently, the increase of fluorine contents of CB made a disappearance of negative temperature coefficient (NTC) behavior of the polymeric switch, which was probably due to the reduction of CB reaggregation after melting point of the HDPE, resulted from the decreasing of London dispersive component of the surface free energy for CB particles.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.11 no.11
• /
• pp.4509-4514
• /
• 2010

In this thesis, the effect of switch maintenance improvement is confirmed after testing and operating the switch monitoring system that were researched and developed originally in order to improve method of electric switch maintenance. However, as in an automatic interlocking station where a ground crew was not placed, repair and inspection could not be carried out until the maintenance person comes in case of switch problems or maintenance. In order to improve this issue, control module was installed in a monitoring system which can communicate through a data radio to a remote computer. Thus, the monitoring device can receive control information which a remote computer commands during the operation of switches. Afterward, it shows information on the real-time status of swith, in particular, anomaly situation through user interface after the switch is operated. By improving performance of the monitoring system in this way which can be managed and controled at a remote place, the prompt countermeasure system in case of disruption will be built and as a result, efficiency and convenience of maintenance improvement will be expected to increase.

• Journal of the Korea Society of Computer and Information
• /
• v.21 no.1
• /
• pp.65-72
• /
• 2016

Network virtualization is an emerging technology for solving the rigidity of the physical network infrastructure. The innovative technique virtualizes all resources in the network, including the network links and nodes, and provides a number of virtual networks on a single network infrastructure. In order to realize a virtual network, a thorough and complete monitoring of all resources in the network should be performed firstly. OpenFlow is an open source stack for network virtualization. However, it is impossible to apply OpenFlow to AP-based legacy wireless LAN environment because OpenFlow targets ethernet-based LAN environment. In this paper, we implement an adaptor-styled virtual switch for AP-based wireless LAN through customizing the Open vSwitch which is a virtual switch of OpenFlow. The evaluation test results show that the implemented OpenFlow stack operates successfully. The implemented OpenFlow stack can now be plugged immediately in existing AP-based wireless LAN environment and plays network resource monitoring. In the future, we can develop wireless LAN virtualization applications on the wireless OpenFlow stack.

• Bulletin of the Korean Chemical Society
• /
• v.22 no.8
• /
• pp.903-908
• /
• 2001

The gene aeg-46.5, which is expressed under anaerobic condition, has putative triple -10 regions and four transcription start sites. The mRNA transcription level and its start point change depending on the aerobic/anaerobic growth condition. RNA polymerase and its regulatory proteins must choose which of three -10 region to use. The putative triple 10 region was mutated to make only one of them function with consensus -10 region sequence (TATAAT) and the other two as non-functional region. The results show that the second and third -10 regions are used for the aerobic/anaerobic expression. The third -10 region is responsible for the high aerobic to anaerobic switch ratio. This suggests that only the last two of the putative triple -10 region have functions on aeg-46.5 gene expression switch control. The phenotype of the mutated promoter was tested in the wild type cell and narL - cell. The results indicate that the control by NarL is independent from the selection of -10 region. The expression patterns on multi-copy plasmids and on single-copy chromosome were compared. These results show that the aerobic/anaerobic switch control of aeg-46.5 is through the choice of -10 region. The mechanism of choosing different -10 region remains to be seen.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• v.16 no.11
• /
• pp.3680-3693
• /
• 2022

The handover procedure of IEEE 802.11 wireless local area networks (WLANs) introduces significant delay, which can degrade the quality of service (QoS) especially for delay-sensitive applications. Although studies have been conducted to support handover in SDN-based WLAN, there is no research to reduce the channel scanning procedure that takes up the most delay time in the handover process. The channel scanning procedure is essential to determine the appropriate access point (AP). To mitigate this problem, this paper proposes a SWITCH: SDN-WLAN integrated handover scheme for QoS-Guaranteed mobile service. In SWITCH, each AP periodically broadcasts beacon frames through different channels in a predetermined order that includes the operating channel information of the AP. This allows mobile stations (MSs) to receive the beacon frames of nearby APs, and therefore they can determine the appropriate APs for handover without the channel scanning procedure. By reporting the information of the newly moved AP to the SDN controller, a flow rule is installed in advance to provide fast handover, and packet loss is reduced by buffering data destined for MS. In addition, the proposed scheme can adaptively operate SWITCH to consider the user location and QoS requirement of flow to save radio resource overhead. Performance evaluation results demonstrate that SWITCH can reduce the handover delays, flow table utilization ratio and radio resource overhead while improving the network throughput.

• 전기의세계
• /
• v.28 no.12
• /
• pp.41-45
• /
• 1979

Improvement of power factor is achieved by reactive-current compensation, connecting power condenser to the circuit. This paper describes a method of reactive-current compensation, employing thyristor switching of capacitor banks without any breaker. This method reduces supply transients to the minimum by means of connecting condenser, because thyristor is triggered at zero point in condenser current. The reactive current detection and the experimental system to trigger thyristor at appropriate moment are given. IThe results show the fast reactive-current compensation on the condition of minimum transient.

• The Transactions of the Korean Institute of Power Electronics
• /
• v.19 no.3
• /
• pp.257-265
• /
• 2014

This paper proposes a simple compensation method for switches of the unclamped voltage in the three-level NPC inverter. Voltages of inner-switches can be unclamped in the three-level NPC (neutral point clamped) inverter. It can cause the problem of the switch fault accident. By adding a capacitor, switches of the unclamped voltage can be clamped. Through the analysis of the circuit, the reason behind switches being unclamped was verified which leads to the solution method that designs a compensation capacitor. The proposed method was validated through the simulation and experimental results.