• 한국항공우주학회지
• /
• 제34권8호
• /
• pp.79-86
• /
• 2006

액체로켓엔진에서 고주파 연소불안정을 제어하기 위하여 인젝터 길이 변화를 줄 수 있는 백홀 스월 인젝터를 분석하였다. 음향흡수자로서 백홀 인젝터의 효과를 분석하기위하여 백홀 인젝터는 1/4 파장 공명기로 해석하였다. 이론적 접근과 음향 실험의 결과로부터 가변적 변위를 갖는 백홀 스월 인젝터가 연소실의 불안정 모드를 감소시킴을 알 수 있었다. 실험적으로 감쇠율을 측정하여 감쇠효과를 측정하였다.

• 한국분무공학회지
• /
• 제23권4호
• /
• pp.159-168
• /
• 2018

Thrust throttling in a liquid rocket engine can be implemented via several ways such as high pressure drop injector, dual manifold, multiple chamber, pintle injector, and gas injection. Thrust throttling using gas injection controls thrust by usually injecting inert gas into propellant through an aerator to reduce the propellant's bulk density. In this study, the outside-in aerator was used in the propellant line to create two phase flow. Closed-type, open-type, and screw-type bi-swirl coaxial injectors were utilized for investigating throttling characteristics such as pressure drop, mixture density, and discharge coefficient according to gas-liquid mass ratio.

• 한국자동차공학회논문집
• /
• 제12권3호
• /
• pp.10-18
• /
• 2004

It is well known that the stratified charge combustion has many kind of advantages to combustion characteristics, such as higher thermal efficiency and less CO, NOx levels than conventional homogeneous mixture combustion. Although this combustion can be caused low fuel consumption, it is produced the high unburned hydrocarbon and soot levels because of different equivalence ratio in the combustion chamber. Moreover it has a lot of possibility of low output and misfire if the mixture gas would not be in existence around the spark plug. In this paper, fundamental studies for stratified combustion were carried out using a constant volume combustion chamber. The effect of locally mixture gas distribution according to control the direct injection and premixed injection in the chamber were examined experimentally. In addition, the effects of turbulence on stratified charge combustion process were observed by schlieren photography.

• 에너지공학
• /
• 제20권4호
• /
• pp.338-345
• /
• 2011

희박예혼합 가스터빈 연소기에 적용되는 스월 유동은 연소효율증가와 배기가스저감을 목적으로 적용된 것로 연소기 내 유동장의 전단층생성에 의한 재순환영역이 생성되게 한다. 이러한 재순환영역은 연소가스 재순환에 의한 화염온도와 화염길이를 낮추는 효과를 가지고 있다. 또한 희박연소에서 연소불안정성 억제효과도 있다. 본 연구에서는 모형가스터빈연소기에서 스월러를 이용하여 스월유동을 유도하고, 연소기 노즐에서 평균속도가 일정 할 때의 스월수 증가에 따른 유동장의 속도분포 특성을 분석하였으며 이때 PIV 계측 실험과 난류통계기법을 이용하여 난류인자들을 도출하였다. 스월수의 증가는 연소기 내부 유동장의 형태가 바뀌게 되고, 재순환영역의 위치가 연소기 노즐방향으로 이동하게 되어 화염길이를 줄여 주며, 난류강도와 난류길이 스케일이 감소하게 되어 에디의 크기가 작아짐을 확인하였다.

• 한국자동차공학회논문집
• /
• 제17권1호
• /
• pp.105-113
• /
• 2009

The performance of a direct-injection type diesel engine often depends on the strength of swirl or squish, shape of combustion chamber, the number of nozzle holes, etc. This is of course because the combustion in the cylinder was affected by the mixture formation process. In this paper, combustion process of biodiesel fuel was studied by employing the piston which has several grooves with inclined plane on the piston crown to generate swirl during the compression stroke in the cylinder in order to improve the atomization of high viscosity fuel such as biodiesel fuel and toroidal type piston generally used in high speed diesel engine. To take a photograph of flame, single cylinder, four stroke diesel engine was remodeled into two stroke visible engine and high speed video camera was used. The results obtained are summarized as follows; (1) In the case of toroidal piston, when biodiesel fuel was supplied to plunger type injection system which has very low injection pressure as compared with common-rail injection system, the flame propagation speed was slowed and the maximum combustion pressure became lower. These phenomena became further aggravated as the fuel viscosity gets higher. (2) In the case of swirl groove piston, early stage of combustion such as rapid ignition timing and flame propagation was activated by intensifying the air flow in the cylinder. (3) Combustion process of biodiesel fuel was improved by the reason mentioned in paragraph (2) above. Consequently, the swirl grooves would also function to improve the combustion of high viscosity fuel.

• 대한기계학회논문집B
• /
• 제20권8호
• /
• pp.2721-2730
• /
• 1996

The present study conducted experimental study of spray combustion to investigate the effect of the inlet conditions of fuel and air on the flame structure, the flame stability and the characteristics of emission in the can-type model of a gas turbine combustor. In the experiment, the diameter of fuel droplet was measured using Malvern particle size analyser and temperatures in the combustion chamber were measured with R-type shielded thermocouple. In addition, flame structure was taken picture with camera and analysed. Gas analyser was also used to analyse the concentration of each components of exhausting gas. The experimental results showed that the flame condition was optimal with swirl number, 0.63 and equivalence ratio, 0.5 for controlling the flame stability, the combustion temperature and the NOx concentration. The present study concluded that both the flame structure and the emission formation were strongly affected by the swirl intensity, which selection was found as an important parameter for either stabilizing flame or lowering the quantity of NOx.

• 한국추진공학회지
• /
• 제18권3호
• /
• pp.26-33
• /
• 2014

기체중심 스월 인젝터는 대형 액체 로켓 엔진의 주연소기로 광범위하게 사용되고 있다. 케로신과 산소과잉 가스와 같은 기체-액체 추진제들은 임계 압력 이상의 높은 압력 조건에서 혼합, 연소되므로 대기조건에서의 비연소 분무실험은 실제적인 분무 거동을 정확히 재현할 수 없다. 기체중심 스월 인젝터에서 실제 조건과 유사한 분무 패턴을 관측하기 위해서, 고압 챔버와 제어 시스템이 구성되었고 선명한 가시화 결과를 얻기 위하여 실험 과정이 정밀하게 제어되었다.

• Journal of Mechanical Science and Technology
• /
• 제18권7호
• /
• pp.1169-1176
• /
• 2004

Soot has a great effect on the formation of PM (Particulate Matter) in D.I. (Direct Injection) Diesel engines. Soot in diesel flame is formed by incomplete combustion when the fuel atomization and mixture formation were poor. Therefore, the understanding of soot formation in a D.I. diesel engine is mandatory to reduce PM in exhaust gas. To investigate soot formation in diesel combustion, various measurements have been performed with laser diagnostics. In this study, the relative soot diameter and the relative number density in a DJ. engine was measured by using LIS (Laser Induced Scattering) and LII (Laser Induced Incandescence) methods simultaneously which are planar imaging techniques. And a visualization D.I. diesel engine was used to introduce a laser beam into the combustion chamber and investigate the diffusion flame characteristics. To find the optimal condition that reduces soot formation in diesel combustion, various injection timing and the swirl flow in the cylinder using the SCV (Swirl Control Valve) were applied. From this experiment, the effects of injection timing and swirl on soot formation were established. Effective reduction of soot formation is possible through the control of these two factors.

• 한국추진공학회:학술대회논문집
• /
• 한국추진공학회 2012년도 제38회 춘계학술대회논문집
• /
• pp.454-456
• /
• 2012

한국형발사체(KSLV-II) 3단용 7톤급 액체로켓엔진 연소기 개념설계에 대한 내용을 기술하였다. 3단용 엔진은 TP 방식 엔진이며, 연소기의 진공추력은 6.9 tonf, 진공 비추력 336.9 sec, 연소압력 70 bar, 노즐 팽창비 94.5, 총 추진제 유량 20.5 kg/s, 혼합비 2.45 이다. 7톤급 연소기의 헤드부는 90개의 동축 와류형 분사기로 구성되고, 연소실은 케로신 재생냉각 일체형 연소기이다.

• 대한기계학회논문집
• /
• 제17권6호
• /
• pp.1633-1639
• /
• 1993

본 연구에서는 급속연소기술의 가솔린엔진에 적용을 목적으로 흡입과정시 강한 와류(swirl)를 생성하는 마스크부착 헤드(masked shroud head, MSH)형을 급속연 소형으로 제작하여 마스크부착 헤드형에서의 급속연소효과를 이온전류법에 의한 화염 속도를 측정하므로서 규명하려한다. 이온전류는 이온탐침계(ion probe)를 연소실 표면의 두 지점에 설치하여 검출하며, 이온전류 신호를 정성적인 방법으로 검증한 후 표준 헤드형과 마스크부착헤드형을 장착한 엔진에 대해서 화염전파 속도를 비교 측정 한다. 측정된 화염 전파속도는 정확한 연소특성 분석을 위해 각 사이클에서의 값을 표본으로 하는 통계적 방법으로 처리한다.