• Journal of Korea Technical Association of The Pulp and Paper Industry
• /
• v.33 no.1
• /
• pp.38-44
• /
• 2001

The effects of refining load on the paper properties were investigated. HwBKP, SwBKP and SwUKP were refined with PFI mill at the load of 3.33 N/mm and 6.00 N/mm. Higher Scott bond was obtained at the higher refining load for three pulp used in this study. However any changes in the light scattering coefficient with the change of refining load were not observed. Although the effect of refining load on the formation index for SwUKP was not observed, higher refining load gave the better formation for HwBKP and SwBKP. The fiber mass and fiber crowding factor were not affected by the refining load. Higher apparent density and tensile index were obtained with the higher refining load. However, the higher refining load did not improve the tensile index at the same apparent density. The tear index was decreased with the increase of refining load.

• Proceedings of the Korea Technical Association of the Pulp and Paper Industry Conference
• /
• 1999.04a
• /
• pp.77-77
• /
• 1999

담배용 필터에 사용되고 있는 재료는 아세테이트, 종이, 폴리프로펼렌, 부직포등이 주로 이용되고 있으 며 담배연기의 흡착능을 향상시키기 위한 방법으로 활성탄 제오라이트와 같은 흡착제를 담배필터에 첨가하여 사용하고 있다. 본 실험에서는 펼터에 가장 보편적으로 많이 사용하고 있는 활성탄을 종이 제조과정에 첨가하여 나타나는 물리적 특성을 관찰하였고 제조된 종이를 담배필터에 적용하기 위하여 현행 습식 크림핑(crimping)방법과는 달리 건식 크림핑(crimping)방법을 이용한 적합한 조건을 검토하 였으며 이에 따른 담배필터에서의 연기흡착능을 분석한 결과는 다음과 같다. 1. 시트의 물리적 특성과 담배 연기성분 홉착능을 예측하기 위하여 펄프의 불성과 uv 홉착능을 분 석한 결과 Sw-BKP가 Hw-BKP에 비하여 강도적 성질이 우수하였고 또한 메틸렌불루(methylene b blue) 흡착능도 높은 경 향을 나타내 었다. 2. 활성탄 함량의 증가에 따라 섬유간의 결합력이 약화됨에 따라서 시트의 인장강도 및 파열강도가 감 소하는 경향이 가장 크게 나타났으며 평량이 펼프 배합비보다 높은 인자로 작용하였다. 또한 인자 간의 교호작용에서는 평량과 활성탄 함량에 따라서 크게 나타났으며 평량, Sw-BKP의 함량이 증가할 수록 인장강도는 증가하였다. 3. Stiffness는 활성탄 함량 펄프 배합비 평량의 순에따라 중요한 인자로 작용하였고 활성탄 함량 이 많을수록 stiffness는 감소하였으며 평 량 Sw-BKP의 함량이 높을수록 증가하였다 인자간의 교 호작용은 평량과 활성탄 함량이 다른 요인에 비하여 높은 경향을 보였다. 4. 인열강도는 활성탄 함량이 증가함에 따라 가장 크게 감소하였고 시트의 평량이 펄프 배합비보다 높은 인자로 작용하였으며 평 량 Sw-BKP의 함량이 높을수록 증가하였다 인자간의 교호작용에서는 펄프 배합비와 활성탄 함량에 따라 크게 나타났다. 5. 종이 필터지에서 시트의 평량이 bulk에 가장 큰 인자로 작용하였는데 이는 같은 두께에서 평량올 변화시킨 요인으로 판단되며 시트의 평량이 높을수록 감소하였고 활성탄 함량, Sw-BKP의 배합비 가 높을수록 증가하였다. 또한, 인자간의 교호작용은 평 량과 활성 탄 함량에 따라 크게 작용하였다. 6 6. Crimp index는 관능검사 결과로서 활성탄 함량이 증가함에 따라 현저하게 저하되었으며 평량 및 S Sw-BKP의 배합비가 높을수록 양호한 결과를 나타내었다. 인자간의 교호작용에서는 평량과 펄프 배합비에 따라 가장 높은 경향을 나타내었다. 7 활성탄을 첨가하여 제조한 종이필터의 담배 연기성분 흡착능은 acetate tow에 charcoal을 첨가한 필터에 비하여 tar흡착능이 6% 이상 향상되었고, 특히 증기상 물질(vapour phase)중 aldehyde류에 대한 제거율(removal efficiency)이 높게 나타났다. 8. 건식 크림핑 방법에 의한 담배필터 제조시 펼프의 홉착능, 시트의 강도적 특성, 크림핑 조건 및 담 배 연기성분 흡착능 등을 고려하여 적정조건을 선정하였으며, 펄프 배합비(Sw-BKP따w-BKP)는 6 65/35, 시트의 평량은 40g/$m^2$ 활성탄 함량은 10% 이었다.

• Journal of Korea Technical Association of The Pulp and Paper Industry
• /
• v.32 no.2
• /
• pp.8-15
• /
• 2000

This study is a continuation of the previous experimental analysis and is mostly focused on handsheet strength properties. Four completely different fibers, which were Hw-BKP, SW-BKP, White ledger, and OCC, were selected to investigate the effect of mechanical pre-treatment by Hobart mixer on handsheet strehgth properties. After equal time mechanical pre-treatment, the fibers were refined with laboratory valley beater for 10, 20 and 30 minutes, and handsheets were prepared from the fibers for physical strength comparison. Handsheets from SW-BKP and OCC showed 5-30% increase of breaking length, burst index, tear index, and compression index while handsheets from HW-BKP and White ledger no increase except tear index. In Hobart mixer pre-treatment, HW-BKP and White ledger fibers were easily attached to the wall of the mixer bowl and mechanical action was not effectively applied. The fiber length of Hw-BKP and White ledger were 0.837 mm and 1.591 mm, respectively, while SW-BKP and OCC were 2.744 mm and 2.033 mm, respectively, in weight weighted length. The effective mechanical pre-treatment seems to be related to the fiber length. Tear indexes of the pre-treated furnish were much higher than no pre-treatment at the same breaking length level.

• Proceedings of the Korea Technical Association of the Pulp and Paper Industry Conference
• /
• 2000.04a
• /
• pp.70-70
• /
• 2000

This study is a continuation of the previous experimental analysis and is mostly focused on handsheet strength properties. Four completely different fibers, which were Hw-BKP, Sw-BKP, white ledger, and OCC, were selected to investigate the effect of mechanical pre-treatment by Hobart mixer on handsheet strength properties. After equal time mechanical pre-treatment, the fibers were refined with laboratory valley beater for 10, 20 and 30 minutes, and handsheets were prepared from the fibers for physical strength comparison. Handsheets from SW-BKP and OCC showed 5-30% increase of breaking length, burst index, tear index, and compression index while handsheets from HW-BKP and white ledger no Increase except tear index. In Hobart mixer pre-treatment, HW-BKP and white ledger fibers were easily attached to the wall of the mixer bowl and mechanical action was not effectively applied. The fiber length of Hw-BKP and white ledger were 0.837mm and 1.591 mm, respectively, while SW-BKP and OCC were 2.744 mn and 2.033 mm, respectively, in weight weighted length. The effective mechanical pre-treatment seems to be related to the fiber length. Tear indexes of the pre-treated furnish were much higher than no pre-treatment at the same breaking length level.

• Journal of Korea Technical Association of The Pulp and Paper Industry
• /
• v.41 no.4
• /
• pp.52-57
• /
• 2009

Soda and kraft pulping experiments were carried out in order to investigate the pulping characteristics of bamboo grown in Vietnam. The merit of kraft pulping was not observed for bamboo pulping from the viewpoint of delignification and screened pulp yield. The improvements of delignification during soda and kraft pulping of bamboo were observed by the addition of AQ. The bamboo pulp leaded the bulkier structure than those made from SwBKP and HwBKP. The average fiber length was 1.62mm which is shorter than those of SwBKP, but longer than those of HwBKP. It was found that the physical properties of bamboo pulp sheet could be varied by the pulping method, cooking condition, AQ addition, bleaching and refining etc.

• Journal of Korea Technical Association of The Pulp and Paper Industry
• /
• v.31 no.4
• /
• pp.76-83
• /
• 1999

This study was carried to investigate optimum conditions of charcoal added paper in making cigarette filter for the removal of smoke contents of cigarettes. We investigated the physical properties of charcoal added paper according to the ratio of pulps, the amounts of characoal , the weight of sheets and crimping conditions in dry method, and then analyzed the smoke contents of cigarettes. The results obtained were as follows. 1. Sw-BKP was higher than Hw-BKP in methylene blue absorption by UV test. 2. Charcoal had an effect on stiffness for decreasing factor greatly , while the addition amounts of Sw-BKP and high weigth of sheets increased it, and the interaction of weight of sheets and charcoal was higher than other factors. 3. Tear index decreased by charcoal addition greatly, on the other hand high weight of sheets and Sw-BKP/Hw-BKP ratio increased ter, and the interaction of pulps and chacoal acted on major factors. 4. We estimated crimp index with sensory evaluation , and charcoal hand an effect on decreasing factor in crimping greatly, while the interaction of weight of sheets and pulp ratio was higher than others. 5. In the case of charcoal added paper filter, tar removal efficiency of smoke contents was higher but about 6% than cigarette filter. Especially vapour phase(aldehyde) in smoke contents was removed greatly.

• Journal of the Korean Wood Science and Technology
• /
• v.26 no.4
• /
• pp.86-91
• /
• 1998

The drainage was used to determine the specific filtration resistance for wood and non-wood fibers. The drainage rate is also affected by factors that can be changed on consistency, pressure drop across the mat, basis weight, additives, and viscosity. Recent development of theoretical studies in flow through porous media and filtration operation emphasize the urgent need for more accurate data for porosity and specific filtration resistance. This study was investigated to determine specific filtration resistance of Hw, Sw-BKP and Kenaf fiber by filtration experimental. Freeness levels selected were 150,250,and $350m\ell$ CSF. The average specific filtration resistance decreased as freeness increased and resistance of Sw-BKP was greater than that of Hw-BKP. The filtrate and porosity increased and specific filtration resistance decreased as particle size of fiber increased.

• Journal of Korea Technical Association of The Pulp and Paper Industry
• /
• v.48 no.3
• /
• pp.37-43
• /
• 2016

Various mechanical and chemical pretreatment methods including alkali treatment, pre-beating, enzyme treatment and oxidation treatment have been used to reduce the production energy of the microfibrillated cellulose (MFC). Among them, alkali swelling can be helpful to reduce the energy consumption because the internal bonding between fibrils could be weakened. In this study, dimethyl sulfoxide (DMSO) was used as a cosolvent to improve alkali pretreatment efficiency and the effects of NaOH concentration during NaOH-DMSO swelling on changes in fiber characteristics of softwood bleached kraft pulp (SwBKP) were elucidated. For alkali treatment in H2O-DMSO solvents, fiber length were decreased with increasing NaOH concentration while fiber width, curl and WRV were increased. WRV began to increase at 8% NaOH solution. In addition, above 8% concentration of NaOH, crystalline structure of pulp fibers converted from cellulose II to cellulose III by DMSO cosolvent. Comparing the previous results with this study, it was shown that DMSO cosolvent could promote swelling of pulp fibers and thus reduce NaOH concentration for the maximum swelling of fibers.

• Journal of Korea Technical Association of The Pulp and Paper Industry
• /
• v.39 no.4
• /
• pp.7-13
• /
• 2007

Effects of pulp type, refining and filler type on the pore characteristics and physical properties of paper were investigated. HwBKP, SwBKP and BCTMP are used to study the effect of pulp type in this study. The effects of each filler (PCC, GCC and talc) and the combination of PCC/GCC were also studied. Highest bulk, pore volume and light scattering are obtained from BCTMP and PCC. It was found that the pore size and pore volume are important in light scattering in paper structure. It was found that PCC was the most effective filler for the improvement of the bulk and light scattering because of the increase in pore volume which can scatter light, but the increase of PCC content was not so effective in the improvement of bulk.

• Journal of Korea Technical Association of The Pulp and Paper Industry
• /
• v.37 no.2 s.110
• /
• pp.78-86
• /
• 2005

Hwaseonji(Korean traditional paper) used for writing and painting has been made from the mulberry bast-fiber and the short-length fiber pulps, wood pulps. However, besides wood pulps, other short-length fiber pulps also can be used instead of wood pulps. Hence, this research was carried out to make the various Hwaseonjis with the different properties, using the five kinds of short-length fiber pulps respectively. The short-length fiber pulps used in this research were softwood bleached kraft pulp(SwBKP) hardwood bleached kraft pulp(HwBKP), rice-straw bleached sulfite pulp(RsBSP), bamboo bleached kraft pulp(BbBKP) and recycled pulp from vellem paper(RP). And, the mixture ratios of the mulberry bast-fiber pulp and short-length fiber pulps were 100:0, 80:20, 60:40, 40:60 and 20:80. After various Hwaseonjis were made from different mixtures mentioned above with hand-made method, physical properties and chinese ink blot property of each paper were measured. The strengthes were the highest in the Hwaseonji made from the mixture of the mulberry bast-fiber pulp and SwBKP. However, chinese ink blot property and smoothness were better when RsBSP, BbBKP or RP were mixed into the mulberry bast-fiber pulp. As a result, the various kinds of Hwaseonjis which the users can choose based on their needs were made.