• Journal of Pharmaceutical Investigation
• /
• 제31권1호
• /
• pp.37-41
• /
• 2001

Various characteristics of polyethylene oxide (PEO) are useful for drug delivery systems. In this study, PEO was used as a sustained release matrix system containing cefatrizine propyleneglycol (Cefa-PG) which is a new semi-synthetic broad-spectrum and orally active cephalosporin. Five kinds of sustained release matrix tablets were formulated with various content of PEO and other ingredients. And three types of matrix tablets were formulated of which compositions were the same but the hardness was different. It was found that PEO content influenced drug release rate. Increasing PEO content, the drug release rate from matrix tablets was decreased. In addition, Avicel, one of the ingredients of matrix components, changed the drug release from the sustained release PEO matrix tablets. With increasing Avicel content, the rate of drug release was increased. For the effect of hardness of matrix tablets, the rate of drug release is decreased with increasing hardness. In comparison of bioavailability parameters after oral administration of Cefa-PG PEO matrix tablets and general Cefa-PG capsule in beagle dog, the sustained release PEO matrix tablets is more useful than a general dosage form. $AUC^{0-12}$ of the sustained release PEO matrix tablet and the general dosage form was 1.16 and 0.644 respectively.

• 대한약학회:학술대회논문집
• /
• 대한약학회 2003년도 Proceedings of the Convention of the Pharmaceutical Society of Korea Vol.1
• /
• pp.292.1-292.1
• /
• 2003

Purpose. To develop a new heterodisperse 650mg acetaminophen HPMC matrix tablet with biphasic sustained release profiles. Methods. Hydroxypropylmethylcellulose(HPMC) matrix tablets were prepared by wet-granulating drug with other excipients, followed by direct compression of the dried granule mixtures into tablet using a rotary tablet machine. (omitted)

• Journal of Pharmaceutical Investigation
• /
• 제32권2호
• /
• pp.95-101
• /
• 2002

Matrix tablets of nifedipine (NP) were prepared with Eudragit, diluent (lactose or Ca. phosphate) and Mg. stearate employing two different preparation methods (wet granulation and direct compression) to develop its sustained-release dosage forms. The effects of various formulation factors on the dissolution rate of the drug were investigated. Dissolution test was studied in pH 6.8 phosphate buffer containing 1% sodium lauryl sulfate using the paddle method. Formulation factors were the type and content of Eudragit, the type of diluent and the tablet preparation method. The optimum formula of NP matrix tablet, which resulted in a similar dissolution profile to that from Adalat Oros used as a reference, was 30 mg NP, 10% Eudragit RS, 2% Mg. stearate and an adequate quantity of lactose to yield 500 mg weight using the wet granulation method.

• Journal of Pharmaceutical Investigation
• /
• 제35권6호
• /
• pp.453-460
• /
• 2005

4-Aminopyridine (AP) is a potassium channel blocker used in the treatment of neurological disorders such as multiple sclerosis and Alzheimer disease. AP‘s window of therapeutic effect appears to correlate with its plasma halflife (3.5 hours). It demonstrates pH-dependent solubility because of a weakly basic drug. In addition, the resulting release from conventional matrix tablets decreases with increasing pH-milieu of the gastrointestinal tract. The aim of this study is to design sustained release matrix tablet containing AP, overcoming this problem. $Eudragit^{\circledR}$ L 100 (EuL) and sodium alginate were used in an effort to achieve pH independent drug release. The effect of sodium alginate and EuL on drug release from matrix tablet was investigated. The drug release behavior from the different tablets was analyzed by $t_{20%},\;t_{40%},\;t_{60%}$, The exponential diffusion coefficient n, kinetic constant K were calculated according to the Korsmeyer-Peppas equation. The drug release from matrix tablets prepared with sodium alginate was decreased with increasing the content of sodium alginate in pH 7.4 while there is no significant difference in pH 1.2. The exponent n values were determined to be approximately 0.5 and 0.8 respectively, in both pH 1.2 and 7.4. These values indicate diffusion-based anomalous mechanism and erosion-based anomalous mechanism, respectively. The drug release from sodium alginate matrix tablets prepared with solid dispersion of EuL containing drug showed a slow drug release in an acidic medium and a more fast drug release in phosphate medium, compared with sodium alginate matrix tablets prepared with physical mixture. These results may be attributed to the gel forming ability of sodium alginate and pH dependent solubility of EuL. Therefore, sustained-release AP matrix tablets using sodium alginate and EuL were successfully prepared.

• Journal of Pharmaceutical Investigation
• /
• 제26권3호
• /
• pp.187-192
• /
• 1996

The matrix tablet containing sodium alginate and $CaHPO_4$ can release drugs in a controlled fashion from hydrogel with gelling and swelling due to their interaction as water penetrates the matrices of the tablet. The purpose of this study was to evaluate release characteristics of the matrix tablet varying the amount of sodium alginate, $CaHPO_4$ and other excipients such as chitosan, hydroxypropyl methylcellulose (HPMC) and $Eudragit^{\circledR}$ RS100 in the simulated gastric and intestinal fluid. The practically soluble ibuprofen was used as a model drug. The release profiles of matrix tablet in the gastric fluid as a function of sodium alginate/$CaHPO_4$ ratio was not pronounced because of low solubility of drug and stability of alginate matrices. However, release rate of drug from the matrix tablet in the intestinal fluid was largely changed when sodium alginate/$CaHPO_4$ ratio was increased, suggesting that the ratio of sodium alginate/$CaHPO_4$ was an important factor to control the gelling and swelling of the matrix tablet. The incorporation of other excipients into the matrix tablet also influenced the release rate of drug. The chitosan and HPMC decreased the release rate of drug. No release of drug was occurred when $Eudragit^{\circledR}$ RS100 was added into the tablet. The retarded release of matrix tablet when excipients were added resulted from the hindrance of swelling and gelling of the matrix tablet containing sodium alginate and $CaHPO_4$. The hardness and bulk density of the matrix tablet was not correlated with release rate of drug in the study. From these findings, the ratio of sodium alginate and $CaHPO_4$ in the matrix tablet in addition to incorporation of excipients could be very important to control the release rate of drug in dosage form design.

• Journal of Pharmaceutical Investigation
• /
• 제40권5호
• /
• pp.313-319
• /
• 2010

The objectives of this study were to evaluate the effect of formulation ingredients on the drug release and to optimize the novel sustained release matrix tablet formulations of bupropion hydrochloride. A three factor, three-level Box-Behnken design was used for the optimization procedure, with the amounts of PEO ($X_1$), citric acid ($X_2$) and Compritol 888 ATO ($X_3$) as the independent variables. The selected dependent variables were the cumulative percentage values of bupropion hydrochloride that had dissolved after 1, 4 and 8 hr. Various dissolution profiles of the drug from sustained release matrix tablets were obtained. Optimization was performed for $X_1$, $X_2$ and $X_3$ using the following target ranges; $30%{\leq}Y_1{\leq}45%$; $70{\leq}Y_2{\leq}85%$; $85%{\leq}Y_3{\leq}100%$. The optimized formulation for bupropion hydrochloride was achieved with 12.5% PEO ($X_1$), 2.5% citric acid ($X_2$) and 10% Compritol 888 ATO ($X_3$). The sustained release matrix tablets with the optimized formulation provided a release profile that was close to predicted values. In addition, the dissolution profiles of the sustained release matrix tablet with the optimized formulation were similar to those of the commercial product Wellbutrin$^{(R)}$ SR tablets ($f_2$=79.83).

• 약학회지
• /
• 제41권1호
• /
• pp.48-59
• /
• 1997

Sustained release matrix tablets, pellets, and coated pellets for the delivery of sulindac were prepared using cellulose derivatives at various ratios, and evaluated for the dis solution pattern. The release of sulindac, from matrix tablets prepared with low viscosity HPMC was relatively fast, and especially the tablets made of Metolose SM released all of sulindac within 1 hr. The release of drug from tablets made of other HPMC derivatives were retarded in the order of the following: Pharmacoat 645>Pharmacoat 606>Pharrnacoat 606+HPC-L>HPC-L. The most sustained release pattern was observed with the preparation of high viscous polymer. Metolose 90 SH. While release of sulindac, from matrix type pellet containing 10mg/cap of Metolose 90 SH or 60 SH was completed within 1 hr, a prolonged release formulation (30% in 1 hr) was obtained by the inclusion of EC. Pellets coated with HPMC showed a fast release pattern (${\geq}$ 80% within 2 hrs), whereas pellets coated with HPMC and EC (molar ratio 1 : 1) showed a sustained release pattern (${\geq}$ 80% in 12 hrs), vath the release from EC pellets being the most sustained. Fast (naked) and slow release pellets coated with EC, Metolose 60SH 50cps and propylene glycol. and enteric pellets coated with HPMCP 55 and Myvacet$^{\circledR}$ were prepared, and combined at various ratios for the assessment of dissolution pattern. The result indicates the possibility that the development of 24 hr sustained release delivery systems containing sulindac for oral administration could be achieved by means of combining sustained and fast release pellets at a proper portion.

• Journal of Pharmaceutical Investigation
• /
• 제37권6호
• /
• pp.355-358
• /
• 2007

To develop a sustained-release tablet which had the similar dissolution to commercial ibudilast-loaded sustained-release capsule, the tablets were prepared using hydroxypropylmethylcellulose phthalate (HPMCP), ethylcellulose (EC) and hydroxypropylcellulose (HPC), and dissolution test were carried out with paddle method in KP. The tablet prepared only with HPMCP and EC showed sno similar dissolution pattern to the commercial product. As the ratio of HPMCP/HPC in tablet decreased, the dissolution rate of drug decreased in pH 1.2 but increased in pH 6.8. Furthermore, an ibudilast-loaded sustained-release tablet composed of [ibudilast/EC/HPMCP/HPC (10/10/170/10 mg/tab)] gave similar dissolution to commercial product in pH 1.2 for 3 h and in pH 6.8 for 10 h. Thus, it could be a potential candidate for the substitute of commercial capsule.

• 약학회지
• /
• 제39권2호
• /
• pp.185-192
• /
• 1995

Flurbiprofen, one of potent nonsteroidal antiinflammatory drugs, has several systemic side effects due to dose dumping effect following oral administration of its conventional solid dosage forms. To reduce these side effects and to sustain therapeutic concentration of the drug, matrix tablets of flurbiprofen were prepared and evaluated for sustained release from the tablets. The matrix tablets of flurbiprofen were prepared with Eudragit, Pluronic, (anhydrous) lactose and colloidal silicon dioxide employing two different preparation methods, wet granulation and direct compression. The dissolution rates of the tablets were evaluated using KP 2 method. Formulation factors that affected dissolution rates of flurbiprofen were the type and content of Eudragit, the type and content of Pluronic, and the tablet preparation method. Several formulations of the matrix tablets showed dissolution patterns close to the simulated profile using pharmacokinetic parameters of flurbiprofen.

• 한국임상약학회지
• /
• 제1권1호
• /
• pp.23-30
• /
• 1991

The sustained-release beads containing terbutaline sulfate (TBS) were prepared by rotogranulation method. The drug was dusted on the non-pareil seeds in a CF-granulator. The sustained-release beads were obtained by coating the active beads with ethylcellulose or $Eudragits^{(R)}$, using in any case the same granulator employed for active beads preparation. The release characteristics of sustained-release beads were examined in vitro by rotating basket method applied to $Bricanyl^{(R)}$ durules which is a sustained-release TBS matrix tablet. The release of terbutaline from the beads in vitro was first-order, and the release rate was dependent on both the coat weight ratio and membrane hydrophilicity. Both surfaces of the beads before and after dissolution were smooth. The drug release pattern from the beads could be thought the diffusion through the polymer membrane. The release rate and the surface of the beads stored for 3 years at room temperature were the same with those of the initial beads.