• 오토저널
• /
• 제31권2호
• /
• pp.33-41
• /
• 2009

• 오토저널
• /
• 제31권2호
• /
• pp.42-51
• /
• 2009

• 식물조직배양학회지
• /
• 제21권1호
• /
• pp.47-53
• /
• 1994

본 실험은 포도와 미국자리공의 세포현탁배양계에서 세포생장과 athocyaninn 및 betacyanin 색소생성에 미치는 광의 영향을 조사하였다. 그 결과, 포도의 세포현탁배양계에서의 세포증식 패턴은 광의 효과가 미약하였으나, 미국자리공의 경우는 암배양에 비하여 광조사구에서 뚜렷한 세포증식 패턴을 나타내었다. 포도세포는 12일간의 배양기간중 한번의 생장 피크를 보여주는데 비하여 미국자리공의 배양세포는 두 번의 증식 피크를 보여 광이 세포의 생장 및 분열 주기를 촉진시킬 뿐만 아니라 색소의 축적도 촉진시키는 것으로 나타났으며, 미국자리공 배양세포는 배양 후 4일째에 액포화에 따른 색소의 축적이 확인되었다. 한편, 색소생성에 미치는 광의 영향은 포도 현탁배양계에서는 배양후 6일째부터 생성되기 시작하여 배양 후 10일 전후에 최고치를 보이는데 비하여, 미국자리공의 현탁배양계에서는 세포증식 패턴에 따라 배양 후 4일째와 8일째에 두 번의 피크를 보였다. 그러나 이들 두 가지 모두 암배양하에서는 거의 색소 생합성이 이루어지지 않고 광상태하에서만 색소의 축적을 볼 수 있었다. 한편, 포도 세포배양계에서는 배양 후 4일째에 처리한 광은 약간의 효과가 있었으나, 배양 후 7일째 12시간 이상의 광에 의하여 색소생성이 크게 촉진되는 것을 알 수 있었다. 미국자리공의 경우에는 배양 후 7일 째보다는 오히려 배양 후 4일째에 광이 더욱 효과적이었다. 이상의 사실은 이들 두 가지 색소의 생합성과정에는 광이 절대적으로 필수적이지만 광을 필요로 하는 시기 및 요구하는 광량 등이 서로 다르다는 것을 시사해 준다.

• 정보저장시스템학회논문집
• /
• 제8권2호
• /
• pp.61-66
• /
• 2012

In HDD industry, many technologies have been developed and investigated as means to increase the areal density of drives. Especially, heat assisted magnetic recording (HAMR) system has been considered as the next generation storage device. Most of the HAMR systems use near field optics as heating mechanism. Therefore, light delivery system is indispensable. We considered the light delivery system with laser diode (LD) mount and optical fiber. Mass and stiffness of the HAMR system using these LD mount and optical fiber are changed. The mass and stiffness of the HAMR system affects the slider dynamic behavior. It is necessary to analyze touch down (TD) and take off (TO). And, we performed the TD-TO experiment with HAMR suspension. Finally, we analyzed the result of TD-TO experiments. And we suggested the design of HAMR suspension to improve TD-TO performance.

• Biotechnology and Bioprocess Engineering:BBE
• /
• 제9권1호
• /
• pp.12-16
• /
• 2004

Partitioning of human granulocyte-macrophage colony stimulating factor (hGM-CSF) was achieved in the aqueous two-phase systems (ATPSs) using a crude extract of transgenic tobacco cell suspension culture. This study examined the effects of polyethylene glycol (PEG) molecular weight and concentration and the effects of sodium phosphate concentration in different PEG/sodium phosphate systems on the partition coefficient, K. The best ATPS system was 5% PEG 8,000/1.6 M sodium phosphate after 2 h of incubation at room temperature. In this system, hGM-CSF was partitioned in the PEG-rich phase with a yield of 57.99% and K$\_$hGM-CSF/ of 8.12. In another system, 3% PEG 10,000/1.6 M sodium phosphate, hGM-CSF was also partitioned primarily in the top phase with a yield of 45.66% and K$\_$hGM-CSF/ of 7.64 after 2 h of incubation at room temperature.

• International Journal of Fuzzy Logic and Intelligent Systems
• /
• 제6권1호
• /
• pp.64-69
• /
• 2006

Due to the inherent nonlinear nature of Electro-rheological (ER) fluid dampers, one of the challenging aspects for utilizing these devices to achieve high system performance is the development of accurate models and control algorithms that can take advantage of their unique characteristics. In this paper, the nonlinear damping force model is made to identify the properties of the ER damper using higher order spectrum. The higher order spectral analysis is used to investigate the nonlinear frequency coupling phenomena with the damping force signal according to the sinusoidal excitation of the damper. Also, this paper presents an inverse model of the ER damper, i.e., the model can predict the required voltage so that the ER damper can produce the desired force for the requirement of vibration control of vehicle suspension systems. The inverse model is constructed by using a multi-layer perceptron neural network. A quarter-car suspension model is considered in this paper for analysis and simulation. Simulation results show that the proposed inverse model of ER damper can obtain control voltage of ER damper for required damping force.

• 제어로봇시스템학회논문지
• /
• 제22권12호
• /
• pp.995-1001
• /
• 2016

The vehicle suspension system plays a very important part related with vehicle ride and handling. To improve the vehicle ride and handling many researches have been progressed from various damping parameter tuning techniques to the development of the electronic controlled suspension systems. In this paper, as one of the ride performance improvement a disturbance observer(DOB) based control system is applied to the quarter car vehicle model in order to show that the DOB can obtain good vibration isolation characteristics. First, the robust stability criterion for the DOB is introduced in detail, and then how DOB is applied to the 1/4 car vehicle model is represented, and finally to confirm the effectiveness of the DOB in vehicle ride performance improvement a computer simulation is carried out for various driving conditions.

• 정보저장시스템학회:학술대회논문집
• /
• 정보저장시스템학회 2005년도 추계학술대회 논문집
• /
• pp.177-178
• /
• 2005

The load/unload behavior of the hard disk drive slider is studied in terms of the air bearing static characteristics. The numerical continuation methods are applied to calculate suspension force - equilibrium position curve. The critical preloads of the femto size slider are analyzed. The hi-stability conditions are depicted on the skew angle - preload diagram. The perturbation method is used to check the stability of the solution branches.

• 대한토목학회논문집
• /
• 제33권4호
• /
• pp.1315-1326
• /
• 2013

하중에 민감한 케이블을 사용하는 현수교의 기하학적 형상은 하중을 저항할뿐만 아니라 시지각적 실루엣이 된다. 이 연구에서는 정력학적 도해법이 지니는 두 가지 가능성을 이용해서 힘의 흐름을 따르는 현수교의 초기 구조형태계획법을 제시한다. 첫째, 힘다각형을 이용해서 동일한 힘에 대해서 다양한 하중경로를 모색할 수 있다. 둘째, 구조형태와 힘다각형 사이에 존재하는 상반원리를 이용해서 새로 형성된 하중경로에 대응하는 구조형태를 생성할 수 있다. 먼저 현수교의 구조적 및 미학적 측면에 영향을 미치는 주요 구조형태변수를 선정한다. 이러한 변수에 대해서 구조형태와 힘다각형의 상호관계를 분석한다. 이를 토대로 현수교의 초기 구조형태계획에 대한 일련의 설계과정절차들을 개발한다. 이 연구에서 제시하는 구조형태계획법은 유사 형태저항 구조시스템의 설계대안을 생성하는데 수월하게 확장해서 사용할 수 있다. 또한 구조형태와 힘의 흐름과의 상호관계를 설명하는 교육용 도구로도 사용될 수 있을 것으로 기대한다.

• 품질경영학회지
• /
• 제52권2호
• /
• pp.377-394
• /
• 2024

Purpose: To derive the optimal conditions for the Rubber based colloidal suspension manufacturing process, which made using a stirrer, to apply the mixture design method. Methods: We used two process component and one process variable Mixture design to derive the optimal conditions for the process. The response variables were selected for rotational viscometer measures which can represent Rubber based colloidal suspension quality. The input variables were selected as the values of rubber-organic solvent expressed in proportions as process components and stirring amount as a process variable which are controllable factors in the process. Results: Based on the results of the experiment, rubber and organic solvent and the interaction between stirring amount and rubber and the interaction between stirring amount and rubber and organic solvent were significant. Reproducibility of the regression model was confirmed by the observation that the values obtained from the reproducibility experiment fell within the confidence interval. Additionally, the model predictions were found to be in close agreement with the field measurements. Conclusion: In this study, a regression model was developed to predict the viscosity change of colloidal suspensions based on the proportion of rubber based colloidal suspension. The developed regression model can lead to improved product quality.