• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2003년도 춘계학술대회 논문집
• /
• pp.557-560
• /
• 2003

Magnetorheological finishing(MRF) is a newly developed and recently commercialized for finishing optical components. The magnetorheological fluid consists of a water based suspension of carbonyl iron, nonmagnetic polishing abrasives, and small amounts of stabilizer. This magnetorheological fluid is pumped from conditioner on the rotating wheel and suctioned back to the conditioner, where it cooled to setpoint temperature and evaporative losses are replaced. This method could produce some problems in suction. So newly designed MRF tools is proposed in which MR fluid is not circulated and conditioned by the slurry. The new polishing mechanism is experimented. Measured surface roughness supports the validity of this mechanism.

• 한국세라믹학회지
• /
• 제25권6호
• /
• pp.615-622
• /
• 1988

To develope good slip and microstructure of Si3N4 the knowledge of the interaction of particles in liquid systems is required. In this work polyethyleneimines was tested as a stabilizer for Si3N4-water system. The stability of slip dispersed with polyethyleneimines was good over a wide range of pH and concentrated slips with low viscosity could be cast. This work comprises a systematic investigation including determination of electrical mobility in order to estimate the particle surface charge, determination of sedimentation rate, as well as measurements of the viscosity as a function of dispersants, pH and shear rates. The influence of deflocculation on the microstructure of slip cast Si3N4 was discussed.

• Journal of Pharmaceutical Investigation
• /
• 제37권6호
• /
• pp.349-354
• /
• 2007

For decades, the various virtues of ${\alpha}-lipoic$ acid (ALA), a natural material synthesized in most cells, have been intensively studied and proved. Recently it was reported that ALA caused significant bodyweight reduction via appetite suppression. Unfortunately, the efficacy requires an administration over 50 mg/kg. The low bioavailability and the short plasma half life of ALA lead us to explore novel pharmaceutical dosage forms using nanoparticles. In this study, the effect of polymeric stabilizers on the bioavailability improvement of ALA nanoparticles was investigated. The reduction of particle size via nano-comminution technology was successful resulting in volume average particle sizes of 320 - 340 nm. The in vitro release rate of ALA did not reflect the decrease of particle size, possibly because of the self polymerization of ALA during nano-comminution. The type of polymeric stabilizers could not affect the release rate either. However, the in vivo food intake results of ALA showed that nano-suspensions were more effective than microparticles or a salt form. The nano-suspension containing polyvinyl pyrrolidone as the primary stabilizer and polyacrylic acid as the secondary stabilizer showed more improved efficacy for 2 hours.

• BMB Reports
• /
• 제30권6호
• /
• pp.379-384
• /
• 1997

The effects of several ions on the specific activity and isozyme patterns of cellular and secretory isoperoxidases were studied in suspension-cultured cells of rice (Oryza sativa L.). Peroxidase release into the culture medium occurred in the absence of added calcium. The addition of calcium ion greatly stimulated the secretion of cationic isoperoxidases such as C2 and C3 into the medium: a maximum 11 fold increase of secretions occurred in the presence of 5 mM $CaCl_2$, and the secretion was accomplished within 1 hour after the addition of $CaCl_2$. About a 10 fold increase of the peroxidase secretion into the medium did occur with 0. 5% NaCl, whereas cellular isoperoxidase levels were reduced notably. About a 6 fold increase of the specific activity of cellular isoperoxidase was found in 5 mM $NiCl_2$-treated cell, while $NiCl_2$ had no effect on the secretion of peroxidase into the medium. Various concentrations of KCl did not change peroxidase secretion, but 5 mM $ZnCl_2$ reduced peroxidase secretion greatly. The major secretory isoperoxidases stimulated by $CaCl_2$, NaCl and cellulase were composed of cationic isoperoxidases C2 and C3, which were found to be localized in the cell wall of rice by examination of the enzyme in the protoplast. Furthermore, the secretion rates of secretory isoperoxidases were increased rapidly when cellulase was treated in the absence of the osmotic stabilizer of 0.4 M mannitol. These results suggest that the stimulations of secretory isoperoxidase levels seem to be due to the stimulation of secretion into the culture medium of rice.

• 폴리머
• /
• 제27권5호
• /
• pp.493-501
• /
• 2003

의치상 레진 (틀니)의 기본 물질로 사용되는 폴리(메틸 메타아크릴레이트) (PMMA) 입자를 폴리(비닐 알코올) (PVAL)을 안정제로 사용하여 현탁중합법으로 중합하였고, PVAL 농도와 교반속도, 공단량체의 도입에 따른 PMMA의 입자 크기 변화 및 분자량의 변화를 관찰하였다. 또한 합성된 PMMA 수지와 메틸 메타아크릴레이트 단량체를 이용하여 고체/액체 비 (P/L ratio)를 2:1 로 하여 병상물을 제조하고, 일정한 가압성형 조건하에서 제작된 시편으로 수지의 입자 크기 및 분자량에 따른 PMMA에 기초한 틀니용 수지의 기계적 물성 변화를 관찰하였다. 그 결과 평균입자 크기가 100 $\mu$m 이하에서는 분자량이 커질수록 기계적 물성이 높게 나타났으며, 그 이상인 영역에서는 분자량에 상관없이 입자 크기가 증가할수록 기계적 물성의 저하 현상이 관찰되었다. 아울러 중합시 교반속도와 PVAL의 농도를 조절하여 크기와 분자량을 조절 가능하였는데, P/L 부피비가 2인 조건에서 제조된 열경화성 틀니용 수지로 이용되는 입자의 평균크기는 100 $\mu$m 정도가 적절하며, 분자량은 3.0${\times}$$10^{5}$ 전후가 적절함을 알 수 있었다.다.

• 청정기술
• /
• 제12권2호
• /
• pp.62-66
• /
• 2006

다양한 폴리디메틸실록산계 공중합체를 안정화제로 이용하여 초임계 이산화탄소 내에서의 개환중합을 통해 PLLA를 제조하였다. 초임계 개환중합에 사용된 폴리디메틸실록산 공중합체는 폴리디메틸실록산 거대개시제를 사용하여 그룹전이중합법(GTP법)을 이용하여 제조하였다. $\small{L}$-락타이드의 초임계 현탁중합을 통해 수미크론크기의 입자가 형성되었음을 전자 주사 현미경을 통해 확인하였고, 또한 겔 투과 크로마토 그라피 분석을 통해 상당히 좁은 분자량 분포의 PLLA가 제조되었음을 확인하였다.

• 한국분말재료학회지
• /
• 제17권5호
• /
• pp.390-398
• /
• 2010

Aqueous gold nanoparticle dispersion was synthesized by chemical reduction method using diethanolamine as reducing agent and polyethyleneimine as dispersion stabilizer. The synthesis conditions for the stable dispersion of the gold nanoparticle suspension were determined by changing the amount of the reducing agent and dispersant during the wet chemical synthesis procedures. The face centered cubic lattice structure of the gold nanoparticles was confirmed by using X-ray diffraction and the morphologies of the nanoparticles were observed by transmission electron microscope. The synthesized gold nanoparticle dispersion was concentrated by evaporating the dispersion medium at room temperature followed by the addition of ethyleneglycol as humectant for the increase of the elastic properties to obtain gold nanoparticle inks for direct ink writing process. The line patterns were obtained with the gold nanoparticle inks during the writing procedures and the morphologies of the fine patterns were observed by scanning electron microscope.

• Wind and Structures
• /
• 제38권5호
• /
• pp.399-410
• /
• 2024

Long-span suspension bridges located in typhoon-prone regions face significant risks of flutter instability, particularly in girder erection. Despite the implementation of aerodynamic countermeasures designed for the service stage, the flutter stability of bridge in girder erection may not meet the required standards. Nowadays, the double-deck truss girder is increasingly common in practical engineering which exhibits different performance from the single-deck truss girder. To gain insights into the flutter performance of this girder type and determine temporary aerodynamic countermeasures for flutter suppression in girder erection, wind tunnel tests were conducted. The effects of affiliated members on the flutter performance were first examined. Subsequently, different aerodynamic countermeasures were designed and their effectiveness was tested. The results indicate that the stabilizers above and below the upper and lower decks are the most effective for the flutter stability of bridge at positive and negative angles of attack, respectively. The higher the stabilizers are, the better the effect on flutter suppression achieves. Considering the feasibility in practical engineering, a temporary stabilizer above the upper deck was considered. It is expected that the results could provide references for the aerodynamic design of double-deck truss girder during erection.

• Elastomers and Composites
• /
• 제45권2호
• /
• pp.122-128
• /
• 2010

소수성실리카를 안정제로 하는 현탁중합반응법을 이용하여 합성한 스티렌(St)/부틸메타크릴레이트(BMA) 공중합체 (co-PSB) 입자의 전단점도를 모세관 레오미터 (capillary rheometer)를 이용하여 $170^{\circ}C$에서 측정하였다. co-PSB 입자의 전단점도는 중량평균분자량이 74,800 g/mol 이하인 경우 낮은 전단속도에서는 뉴톤거동을 보였다. 중량평균분자량이 136,800 g/mol을 초과하면서 전단점도는 전단속도의 전 영역에 걸쳐 감소하였고 전단속도에 대한 기울기의 절대값은 분자량의 증가와 함께 증가하였다. St/BMA의 구성비가 7/3, 5/5 및 3/7의 co-PSB 입자는 유사한 분자량을 나타내었지만 BMA의 구성비가 증가하면서 유리전이온도와 전단점도는 감소하였다. St/BMA의 구성비가 1/9 인 co-PSB의 경우 유리전이온도는 더욱 감소하였으나 초기 전단점도는 크게 증가하였다. 카본블랙을 함유하는 co-PSB 복합체 입자의 전단점도는 카본블랙의 증가에 따라 증가하였으나, 카본블랙의 농도에 따른 전단점도의 변화는 분자량 및/혹은 구성비의 변화 효과에 비교하여 미약하였다.

• 폴리머
• /
• 제35권1호
• /
• pp.23-29
• /
• 2011

소수성 설리카를 안정제로 하는 현탁중합법으로 $75^{\circ}C$에서 합성한 고분자입자들을 모세관 레오미터를 이용하여 전단점도를 측정하였다. 전단점도는 중량평균분자량이 증가하면서 비뉴톤거동을 나타내였다. 스타렌(St)/부틸메타크릴레이트(BMA)의 구성비를 변화하며 합성한 공중합체 입자를 이용하여 $170^{\circ}C$ 및 $190^{\circ}C$에서 측정한 전단점도는 분자량, 온도 뿐만 아니라 구성비에 따라서도 변화하였다. St/BMA의 구성비가 7/3, 5/5 및 3/7의 공중합체 (co-PSB) 입자의 경우 유사한 분자량을 나타내었지만 BMA의 구성비가 증가하면서 전단점도는 소폭 감소하였다. BMA의 비가 3/7을 초과하며 높은 전단속도에서의 전단점도는 급격히 감소하였다. 이는 BMA 구성비의 증가에 따른 PBMA 사슬의 길이의 증가로 인한 유동성 향상에 기인하는 것으로 판단된다. 카본블랙을 함유하는 co-PSB 복합체 업자의 전단점도는 카본블랙의 증가에 따라 점진적으로 증가하였으나, 카본블랙의 농도 증가에 따른 전단점도의 증가는 분자량의 증가 효과에 비교하여 미약하였다.