• 한국측량학회지
• /
• 제39권6호
• /
• pp.549-554
• /
• 2021

정밀한 3차원 도로공간정보는 자율주행을 위한 기본 인프라로 안전한 자율주행을 위한 필수 데이터라 할 수 있다. MMS (Mobile Mapping System)은 도로공간정보 구축을 위한 장비로 활용되고 있으며, 관련 연구가 수행되고 있다. 하지만 MMS를 활용한 성과물의 정확도에 중요한 요인이 되는 기준점 거리가 성과물의 정확도에 미치는 영향을 분석한 연구는 부족한 실정이다. 이에 본 연구에서는 MMS를 이용하여 취득되는 데이터의 기준점 거리별 정확도를 분석하고자 하였다. 연구대상지 도로에 대해 MMS를 이용하여 포인트클라우드 데이터를 구축하였다. 데이터 처리는 MMS 데이터는 기준점과의 거리를 고려하여 4개의 데이터를 구축하였으며, 정확도 평가를 위해 12개의 검사점 성과와 비교하여 정확도를 분석하였다. MMS 데이터의 정확도는 수평방향으로 -0.09m~0.11m, 높이방향으로 0.04m~0.19m의 차이를 나타내었다. 수평방향에 비해 수직방향의 오차가 크게 나타났으며, 기준점과의 거리가 증가함에 따라 정확도가 감소함을 알 수 있었다. 또한 구간의 거리가 길어질수록 기준점과의 거리가 하나의 데이터 셋에서 달라질 수 있기 때문에 추가적인 연구가 필요하며, 향후 여러 개의 기준점을 사용하는 방법에 대한 정확도 평가가 이루어진다면 정밀한 도로공간정보 구축을 위한 효과적인 기준점 활용 방안을 제시할 수 있을 것이다.

• 한국측량학회지
• /
• 제40권5호
• /
• pp.421-428
• /
• 2022

토공은 건설공사의 시작이며 기초가 되기 때문에 가장 중요한 공정이다. 특히 토공의 다짐측정은 건설공사의 품질과 생산성에 직결되는 중요한 요소이다. 기존 다짐측정은 주로 들밀도 시험, 평판재하시험과 같은 아날로그 방식을 이용하여 수행되었다. 하지만 최근 4차 산업혁명의 고도화에 따라 스마트건설기술이 대두되면서 다짐측정 또한 기존 아날로그 시험의 단점을 보완한 기술에 대한 연구가 활발히 진행되고 있다. DCPT는 기존 시험법과 비교하여 간편하고 속도가 빨라 최근 관심이 증대되고 있지만 데이터를 수기로 측정하는 아날로그 방식으로 이력관리와 데이터 검증 등 여러 단점을 가지고 있다. 본 연구에서 개발한 IoT 기반 DCPT 시스템은 기존 DCPT에 디지털 와이어센서, 모바일 폰, 블루투스를 결합했다. 개발된 장비는 아날로그 DCPT 뿐만 아니라 다른 다짐시험법과 비교하여 빠른 시험시간, 1인 계측, 저비용, 모바일 기반 계측 이력 및 데이터 관리, 실시간 데이터 확인 등의 장점을 갖는 것이 특징이다. 추가로, 개발된 장비의 현장 적용성 검증을 위해 아날로그 DCPT와 함께 테스트베드를 구축하여 검증하였다. 테스트베드는 롤러장비를 통해 실제 토공현장과 유사한 조건으로 구축했다. DCPT 데이터는 322개 측점에서 총 3220개의 데이터를 획득했다. 분석결과로 IoT 기반 DCPT의 성능은 우수한 것으로 나타났으며 개발된 장비를 통해 구축된 테스트베드 또한 다짐이 수행됨에 따라 안정적인 결과를 보이는 것으로 나타났다.

• 한국치위생학회지
• /
• 제12권2호
• /
• pp.379-389
• /
• 2012

Objectives : The purpose of this study was to improve the practice level on dental hygienists'infection prevention by examining the actual condition of dental hygienists'infection control and analyzing factors of having influence upon this. Methods : A questionnaire survey was carried out from July 18, 2011 to August 26 targeting dental hygienists who work at medical institutions where are located in Daegu, Busan and Ulsan Metropolitan Cities and Gyeongsangnam buk-do. After then, the following conclusions were obtained. Results : 1. As a result of surveying practice by item in the practice level of infection prevention, the items with high practice level in the management of infectious diseases were surveyed to be 12 months(89.6%) for health-checkup cycle and to be having experience of vaccination(78.0%) for hepatitis type B. The items with high practice level in the management and practice of washing hands were indicated to be in order of regularly paper towel(87.7%) and hands cleaning after regular medical examination(80.5%). In the item of the practice on wearing and managing individual protection equipment, regularly wearing(93.1%) rubber globes given washing implements was indicated to be high. 2. As a result of analyzing working career, working institution, working region, and practice level of infectious-disease management, the appearance of fulfilling infection control guidelines at medical institution and the experience of education for infection control were indicated to have difference depending on working institution. Regularly health checkup was indicated to have difference depending on respondents' working career and working institution. 3. The whole average in the practice level of infection prevention according to working career, working institution, and working region was indicated to be 2.55 out of 3-point perfection. 4. Wearing latex gloves was indicated to have statistically significant difference depending on working institution(p<0.001) and working region(p<0.001). The exchange of latex gloves every patient and the use of paper apron had statistically significant difference depending on working region(p<0.001). 5. As a result of comparing the frequency of using protection equipment for preventing infection according to the management of infectious diseases, the statistically significant difference was shown depending on the appearance of infection control guidelines at medical institution(p<0.001), the appearance of having experience of health checkup(p<0.01), and the appearance of having experience of vaccination for hepatitis type B(p<0.05). Conclusions : The above-mentioned findings showed that the denture satisfaction of the denture-wearing senior citizens was linked to their subjective oral health awareness. Therefore it will be possible to improve denture-wearing elderly people's quality of life when oral health plans geared toward boosting their denture satisfaction are carried out.

• 한국치위생학회지
• /
• 제9권3호
• /
• pp.468-478
• /
• 2009

This research was performed to provide basic data for the development of infection related dental hygiene studies by surveying the current condition of recognition among students in the department of dental hygiene toward hospital infection management while receiving the following results by using a personal self-administered survey method targeting 303 students in the department of dental hygiene from certain areas. 1. With the current condition of recognition on the sanitization and sterilization of instruments among students in the department of dental hygiene(study), the rate at which surgical instruments are to be sterilized with autoclaves was 79.9% which was relatively higher than other instruments while it was shown that prosthetic instruments for treatment was 56.4%, conservative instruments for treatment was 51.8%, and ultrasonic scaler tip was 51.1% while the way syringe tips(36.1%) and the dental anesthetic apparatus(27.9%) were revealed to require sanitization by alcohol. 2. The 'hand wash' area was the highest with 4.71 while the 'materials and environment management' area and 'equipment management' area appeared high respectively with 4.43 and 4.41. 3. With the current condition of recognition on equipment management, 'equipments used for contagious patients are separately washed after a one-time use and must be sterilized or separated-and-discarded' was the highest with 4.82 while 'sterilization equipments with humidity or water on it are considered contaminated and are not used' showed the lowest recognition level with 3.90. 4. Regarding the current condition of materials and environment management, 'contagious and general trash are separated and discarded' was the highest with 4.70 while 'the refrigerator for medicine storage is cleaned on a regular basis once a month' was revealed as the lowest with 4.11. 5. With the current condition of recognition on hand washing, 'one must wash their hands after coming in contact with contagious patients, was the highest with 4.90 while washing hands after taking off gloves' appeared as the lowest with 4.51 point. To conclude department of dental hygiene there is to infection management and necessary about organization disinfecting and pasteurization to strengthen an education in order raising a stamp helping practical ratio about the infection management which whole, is from presence at a sickbed and connection does and about the infection management which is substantial and educational program development leads feed with the fact that deepening studying which is continuous must become accomplished becomes.

• 한국방사선학회논문지
• /
• 제2권4호
• /
• pp.11-25
• /
• 2008

유방암이 여성암 발생 1위를 차지함에 따라 선별검사로서 유방촬영율 또한 증가하였다. 유방촬영술은 병변의 유선 조직이나 지방조직 등 주위 조직의 X선 흡수차가 작고 미세 석회화를 묘출해야 되는 어려운 점이 있어 정확한 진단을 위해서는 양질의 영상이 요구되며 이를 위해서는 촬영장비의 성능관리와 화질관리가 필요하다. 이에 본 조사에서는 정도관리가 실제적으로 잘 이루어지고 있는지 알기위하여 광주광역시 소재의 의료기관중 유방암검진기관으로 등록되어 있는 기관 37곳을 대상으로 하여 2008년 7월 1일부터 8월 31일까지 62일 동안 유방촬영장비의 정도관리 실태에 관하여 설문조사하였다. 유방촬영장비의 장치적 특성에 대한 조사결과 사용하는 장비에 대하여 모르고 사용하는 경우가 많았다. 필름과 CR을 이용하는 병원은 각각 19곳(49%)이었고 DR을 이용하는 병원도 1곳 있었다. 또 종합병원의 대부분은 CR을 이용하고 있었으며 의원은 필름을 사용하는 경우가 많았다. 정도관리 방법에 대한 질문 결과 38%만이 매뉴얼대로 점검하고 있었다. 또 조사한 병원 전수가 전문 업체에 정도관리를 맡기고 있었다. 그 이유로는 전담인력, 시간, 거리 등 한계점 때문에 맡긴다는 대답이 65%로 가장 많았으며 기자재가 없어서 맡긴다는 대답이 44%로 그 다음으로 많았다. 이러한 결과는 정도관리가 형식적으로 이루어지고 있음을 반영하며 전문 업체에 의존하므로 점검 항목자체에 수동적이고 무관심한 것으로 사료된다. 따라서 정기적인 교육을 실시하여 정도관리에 관한 인식을 높이고 방사선사의 적극적인 참여를 통하여 올바른 정도관리를 할 수 있도록 하여야 한다. 이러한 노력과 더불어 전담인력이나 기자재 등 문제점을 해결함으로써 정도관리의 발전에 기여할 수 있을 것이다.

• 한국구조물진단유지관리공학회 논문집
• /
• 제23권6호
• /
• pp.38-44
• /
• 2019

본 연구에서는 아스팔트 콘크리트 도로포장의 표면균열 검출을 위해 합성곱 신경망을 이용하였다. 합성곱 신경망의 학습에 사용되는 표면균열 이미지 데이터의 양에 따른 합성곱 신경망의 성능향상 정도를 평가하였다. 사용된 합성곱 신경망의 구조는 5개의 층으로 구성되어있으며, 3×3 크기의 convolution filter와 2×2 크기의 pooling kernel을 사용하였다. 합성곱 신경망의 학습을 위해서 도로노면 조사 장비를 통해 구축된 국내 도로포장 표면균열 이미지를 활용하였다. 표면균열 이미지 데이터를 학습한 합성곱 신경망 모델의 표면균열 검출 정확도, 정밀도, 재현율, 미검출율, 과검출율을 평가하였다. 가장 많은 양의 데이터를 학습한 합성곱 신경망 모델의 표면균열 검출 정확도, 정밀도, 재현율은 96.6% 이상, 미검출율, 과검출율은 3.4% 이하의 성능을 나타내었다.

• 한국안전학회지
• /
• 제32권4호
• /
• pp.59-65
• /
• 2017

This study examined the stakeholder cognition of the safety certification marking system by surveying manufacturers, lessors, and users. In addition, among various issues about safety certification marking systems, the improvement of safety certification marking contents was suggested in order to guarantee quality of temporary equipments. The results by statistical method show that it is necessary to increase of users' understanding about the safety certification marking system. In addition, the quality management system of temporary equipments should be introduced to control the actual condition that temporary equipments of various product companies are mixed in a site during removal and reuse processes. For detailed marking contents, it is recommended that a certification mark, an identification number, and the production year should be displayed and the manufacturer name could be selectively presented. Detail informations such as a safety certification number, a product company, a model type or name, a specification, a weight, a product number, and the location of a certification mark should be identified by the identification number.

• 대한공간정보학회지
• /
• 제24권2호
• /
• pp.79-87
• /
• 2016

As 3D geospatial information is demanded, terrestrial laser scanners which can obtain 3D model of objects have been applied in various fields such as Building Information Modeling (BIM), structural analysis, and disaster management. To acquire precise data, performance evaluation of a terrestrial laser scanner must be conducted. While existing 3D surveying equipment like a total station has a standard method for performance evaluation, a terrestrial laser scanner evaluation technique for users is not established. This paper categorizes and analyzes error sources which generally occur in terrestrial laser scanning. In addition to the prior researches about categorizing error sources of terrestrial Laser scanning, this paper evaluates the error sources by the actual field tests for the smooth in-situ applications.The error factors in terrestrial laser scanning are categorized into interior error caused by mechanical errors in a terrestrial laser scanner and exterior errors affected by scanning geometry and target property. Each error sources were evaluated by simulation and actual experiments. The 3D coordinates of observed target can be distortedby the biases in distance and rotation measurement in scanning system. In particular, the exterior factors caused significant geometric errors in observed point cloud. The noise points can be generated by steep incidence angle, mixed-pixel and crosstalk. In using terrestrial laser scanner, elaborate scanning plan and proper post processing are required to obtain valid and accurate 3D spatial information.

• 대한원격탐사학회:학술대회논문집
• /
• 대한원격탐사학회 2003년도 Proceedings of ACRS 2003 ISRS
• /
• pp.955-958
• /
• 2003

Nepal is a country of mountains The higher order geodetic points were mostly established on the top of mountains and these points were used for the geodetic network extension. Lower order geodetic control networks were established at different times and used for the surveying and mapping activities of the country.. It has been found that the rate of convergence between north and south borders of Nepal to be 21${\pm}$2 mm each year and the rate translation of Kathmandu to 55${\pm}$3 mm/year to the plates. The most intense deformation in Nepal occurs along the belt of high mountains along its northern border res ulting in a strain contraction rate normal to the Himalayan Arc. This belt is approximately 40 km wide and extends into southern Tibet.( 13). Recently Survey Department of Nepal has lunched a program of strengthening the existing geodetic network of Nepal and re-observed the position of higher order geodetic points by using geodetic GPS receivers to evaluate their position and thus to define the precision of the control points once again. This paper describes the observation procedure and the adjustment results of the existing higher order control network of Nepal established in different time using different types of equipment and techniques; and highlights the observation procedure and the result obtained after the post processing of the GPS observation results. Attempt has been made to give the procedure and identify the methodology for the re observation of existing higher order geodetic points by using GPS receiver and post processing the observed data so that the existing higher order geodetic points are within the given accuracy standard.

• Advances in concrete construction
• /
• 제10권6호
• /
• pp.547-557
• /
• 2020

This paper presents one of the demonstration projects undertaken during the FP7 EU-funded Anagennisi project (Innovative reuse of all tyre components in concrete-2014-2017) on a full-scale (30 m×40 m, thickness: 0.2 m) Steel Fibre Reinforced Concrete (SFRC) slab-on-grade using a blend of manufactured steel fibres (MSF) and Recycled Tyre Steel Fibres (RTSF). The aim of the project was to assess the use of RTSF in everyday construction practice. The Anagennisi partners, Dulex Ltd in collaboration with Gradmont-Gradacac Ltd and University of Zagreb, designed, cast and monitored the long-term shrinkage deformations of the indoor slab-on-grade slab at Gradmont's precast concrete factory in Gradacac, Bosnia and Herzegovina. A hybrid RTSF mix (20 kg/㎥ of MSF+10 kg/㎥ of RTSF) was used to comply with the design criteria which included a maximum load capacity of 20 kN/㎡. The slab was monitored for one year using surveying equipment and visual inspection of cracks. During the monitoring period, the slab exhibited reasonable deformations (a maximum displacement of 3.3 mm for both, horizontal and vertical displacements) whilst after five years in use, the owners did not report any issues and were satisfied with the construction methodology and materials used. This work confirms that RSTF is a viable and sustainable solution for slab-on-grade applications.