• Plant Journal
• /
• v.5 no.4
• /
• pp.73-79
• /
• 2009

Increase of consumption in limited coal reserves leads prices surging. As a result, iron works which produce products with coal are in difficulties. Accordingly, it is required a lot of research of using non-caking coal that is relatively low cost and has abundant reserves. Direct drying and indirect drying are two major methods of drying the coal. Recently, to minimize the needed calories and to save energy, using fluidbed or fluidizing method is a recent main trend of minimizing the size of the facility and maximizing energy efficiency. However there is also disadvantage such as increasing facility investment because of installing additional facilities in the latter part. In this study, we will have theoretical researches on the indirect drying method with heat exchange system which have been traditionally used. As a result it is expected to increase the efficiency of the facility operation.

• Journal of the Korean earth science society
• /
• v.41 no.4
• /
• pp.381-390
• /
• 2020

When a radial collector well is installed and operated for agricultural purposes, negative impacts may be observed over time due to the clogging of horizontal arms, such as reduced groundwater discharge and water quality deterioration. When radial collector well No. 2 was rehabilitated using the high-pressure impulse generation technique, the specific capacity and transmissivity were increased by 43.1 and 100.6%, respectively. In contrast, according to air surging, the specific capacity and transmissivity increased by 33.8 and 85.8%, respectively, compared to the initial rate before rehabilitation. During the operation of radial collector wells since construction, the time of well rehabilitation can be effectively determined by continuously monitoring the groundwater level and pumping rate of the radial collector wells, thereby preventing a decrease in productivity.

• Journal of Advanced Marine Engineering and Technology
• /
• v.39 no.6
• /
• pp.642-648
• /
• 2015

Recently, there have been many studies pertaining to reducing energy consumption on ships. As part of those studies, the energy consumption of ships can be reduced by understanding and controlling the varying loads, excluding fixed loads. In existing ships, engine room fans are usually operated based on the actual experience of the crew without any special guidelines. To realize energy reduction, we investigate the characteristics of engine-room fans, and we propose an energy-management system called the engine room fan control system (ERFCS) and the ERFCS algorithm. The ERFCS controls the fan speed depending on the temperature and pressure, where one to four fans are operated depending on changes in the load. In addition, the minimum rotation speed of the engine-room fan was limited to 50% to prevent the surging phenomenon, which is due to fan damage or low pressure resulting from mechanical friction or heating at low fan speeds. We develop a fan control system simulation model using LabVIEW that is based on the proposed algorithm and ISO 8861. Finally, we perform simulations to confirm that operation of the proposed fan control system is possible using only 46.4% of the power required by the existing method.

• Journal of Physiology & Pathology in Korean Medicine
• /
• v.22 no.6
• /
• pp.1368-1373
• /
• 2008

This study was done to calculate the specific indicators of Fire-Heat Pattern Identification and Yin Deficiency Pattern Identification settled by tentative Korean Standard Differentiation of the Symptoms and Signs for Stroke. The subjects were 764 hospitalized patients with stroke, and a list of registry was made for each of them. Frequency and Correlations among Fire-Heat and Yin Deficiency indicators were studied. Fire-Heat pattern group included 175 patients out of 764, Yin Deficiency pattern group included 103 patients out of 764. Among the indicators of Fire-Heat pattern, those, in order of highest frequency, were 'heat vexation and aversion to heat', 'reddened complexion', 'thirst'. Among the indicators of Yin Deficiency pattern, those, in order of highest frequency, were 'dry mouth', 'red tongue', 'fine and rapid pulse'. Among the Fire-Heat pattern indicators, 'yellow fur' and 'thirst', 'heat vexation in the chest' and 'vexation and insomnia' showed most significant correlation. Among the Yin Deficiency pattern indicators, 'aphtha or tongue sore' and 'heat in the palms and soles', 'red tongue' and 'dry fur' showed most significant correlation. 'Reddened complexion', 'dry eyes', 'surging and parid pulse', 'heat vexation and aversion to heat' are classify between Fire-Heat pattern and Yin Deficiency pattern. 'Surging and parid pulse', 'Reddened complexion' are mostly representative of Fire-Heat pattern and 'fine and rapid pulse' are mostly representative of Yin Deficiency pattern.

• Journal of Korean Institute of Industrial Engineers
• /
• v.33 no.1
• /
• pp.11-25
• /
• 2007

Despite surging interests in analyzing business processes, there are few scientific approaches to analysis and redesign of organizational structures which can greatly affect the performance of business processes. This paper presents a method for deriving and analyzing organizational relations from process models using social network analysis techniques. Process models contain information on who performs which processes and activities, along with the assignment of organizational units such as departments and roles to related activities. To derive social relations between organizational units from process models, three types of metrics are formally defined: transfer of work metrics, subcontracting metrics, and cooperation metrics. By applying these metrics, various relations among organizational units can be derived and analyzed. To verify the proposed method and metrics, they are applied to standard process models of the semiconductor and electronic, and automotive industry in Korea. This paper presents a taxonomy for diagnosing organization structure based on the presented approach. The paper also discusses how to combine analyses in the taxonomy for redesign of organizational structures.

• Journal of The Korean Astronomical Society
• /
• v.37 no.5
• /
• pp.571-574
• /
• 2004

Clusters of galaxies are filled with X-ray emitted hot gas with the temperature of T ${\~}$2-10 keV. Recent X-ray observations have been revealing unexpectedly that many cluster cores have complicated, peculiar X-ray structures, which imply dynamical motion of the hot gas. Moreover, X-ray spectra indicate that radiative cooling of the cool gas is suppressed by unknown heating mechanisms (the 'cooling flow problem'). Here we propose a novel mechanism reproducing both the inhomogeneous structures and dynamics of the hot gas in the cluster cores, based on state-of-the-art hydrodynamic simulations. We showed that acoustic-gravity waves, which are naturally expected during the process of hierarchical structure formation of the universe, surge in the X-ray hot gas, causing a serous impact on the core. This reminds us of tsunamis on the ocean surging into an distant island. We found that the waves create fully-developed, stable turbulence, which reproduces the complicated structures in the core. Moreover, if the wave amplitude is large enough, they can suppress the cooling of the core. The turbulence could be detected in near-future space X-ray missions such as ASTRO-E2.

• Journal of the Korea Furniture Society
• /
• v.27 no.4
• /
• pp.343-351
• /
• 2016

This study was jointly conducted by the department of nursing science in a college of natural sciences and the furniture design department in the art and physical education to research the critical factors for the furniture development for the Elderly in consideration of the surging number of senior citizens not only in Korea but also globally. On the basis of the Elderly's physical and mental characteristics investigated by the department of nursing science, the furniture design guideline for the Elderly was presented. The following points should be considered at designing the furniture for the Elderly. First, multiple functions like chair with removable toilet bowl and part lighting in bed are advantageous. Second, the dimension of furniture such as chair, bed and sofa should be ergonomically thought in terms of structure for the Elderly's convenience. Third, the bright and vivid color of furniture should be chosen from the aspect of the design, while the different kinds of blue should be avoided. Small patterns and high glossy are not recommendable, but various kinds of feelings in different shapes are suggested. Forth, the material should contribute to the fracture prevention and for that sponge, fabric and leather smoothing the surface of furniture are recommendable as the finishing treatment in a wide variety of colors.

• Magazine of the Korean Society of Agricultural Engineers
• /
• v.32 no.1
• /
• pp.87-102
• /
• 1990

개방식과수로는 낮은 압력으로 다량의 용수를 수송할 수 있는 장점을 갖고 있으나 유량변동에 의한 서어징현상이 현저한 것이 단점이다. 관로내의 흐름을 안정시키기 위해서는 이 서어징의 특성이 규명되어 대규모의 서어징에 대한 대책이 강구되어야 할 것이다. 개방식관수로계의 서어징을 강성수주이론으로 계산하기 위하여 운동방정식 연속방정식가 스탠드 수조의 중간벽에 설치된 언의 월유공식등을 조합한 기초방정식이 유도되었다. 본 연구의 수치해석 모델은 가장 일반적인 4차의 Runge-Kutter 방법을 사용하였으며, 이 모델의 정당성과 프로그램의 유통성을 검증하기 위하여 수리모형실험치와 수치해석치가 비교되었다. 그 결과 관로에 공기의 혼입이 없는 경우에는 실험치와 해석치가 실용상의 지장이 없는 정도로 잘 일치되었지만, 공기의 혼입이 발생되는 경우에는 실험치가 해석치에 비해 약간 크게 나타나서 이 경우에도 서러징의 해석이 가능한 새로운 모델의 개발이 필요한 것으로 생각된다. 또한 본 강성수주 모델을 이용하여 현재 서어징 문제로 곤란을 받고 있는 일본 자하연 비파호 부근의 용수간선을 대상으로 그 서어징의 특성과 개선방법을 경계한 결과 개설 개방식관수로계의 스탠드 중 매3개소 스탠드마다 1개소 스탠드의 하류측 수조 수면적 확장하는 것이 타당성이 있는 것으로 해석되었다.

• Journal of Information Technology Services
• /
• v.15 no.2
• /
• pp.157-167
• /
• 2016

Task environment for enterprises and public institutions are moving into cyberspace-based environment and structing the LTE wireless network. The applications "App" operated in the LTE wireless network are mostly being developed with Android-based. But Android-based malwares are surging and they are the potential DDoS attacks. DDoS attack is a major information security threat and a means of cyber attacks. DDoS attacks are difficult to detect in advance and to defense effectively. To this end, a DMZ is set up in front of a network infrastructure and a particular server for defensive information security. Because There is the proliferation of mobile devices and apps, and the activation of android diversify DDoS attack methods. a DMZ is a limit to detect and to protect against DDoS attacks. This paper proposes an information security method to detect and Protect DDoS attacks from the terminal phase using a Preemptive military strategy concept. and then DDoS attack detection and protection app is implemented and proved its effectiveness by reducing web service request and memory usage. DDoS attack detection and protecting will ensure the efficiency of the mobile network resources. This method is necessary for a continuous usage of a wireless network environment for the national security and disaster control.

• 유체기계공업학회:학술대회논문집
• /
• 2000.12a
• /
• pp.122-128
• /
• 2000

Aerodynamic optimization of an automotive air-conditioning blower is a hard task because of the highly complex flow phenomena related to three-dimensional flow separations and the unsteady nature caused by the interaction between primary and secondary air flows throughout the fan. In this paper, an aerodynamic study on a forward-curved centrifugal fan has been carried out Firstly we obtained the fan performance curves versus flow rates showing its unstable nature in the surging operation range. Secondly aerodynamic characterizations were carried out by investigating the velocity and pressure fields in the casing flow passage using a 5-hole pilot probe, at different operating conditions. Surface flow pattern near the cut-off area exhibits similar flow behavior above the best efficiency operating point, although the pressure level increases substantially with the Increase of flow rate. Vorticity in the casing passage flow occurs in all (low rates, downstream from the r-Z plane $\theta$=120 deg., where the position of its core changes with the circumferential location. Although complex, the general flow behavior were common, giving insight in its main aerodynamic features.