• 유체기계공업학회:학술대회논문집
• /
• 유체기계공업학회 2000년도 유체기계 연구개발 발표회 논문집
• /
• pp.122-128
• /
• 2000

Aerodynamic optimization of an automotive air-conditioning blower is a hard task because of the highly complex flow phenomena related to three-dimensional flow separations and the unsteady nature caused by the interaction between primary and secondary air flows throughout the fan. In this paper, an aerodynamic study on a forward-curved centrifugal fan has been carried out Firstly we obtained the fan performance curves versus flow rates showing its unstable nature in the surging operation range. Secondly aerodynamic characterizations were carried out by investigating the velocity and pressure fields in the casing flow passage using a 5-hole pilot probe, at different operating conditions. Surface flow pattern near the cut-off area exhibits similar flow behavior above the best efficiency operating point, although the pressure level increases substantially with the Increase of flow rate. Vorticity in the casing passage flow occurs in all (low rates, downstream from the r-Z plane $\theta$=120 deg., where the position of its core changes with the circumferential location. Although complex, the general flow behavior were common, giving insight in its main aerodynamic features.

• 산업경영시스템학회지
• /
• 제23권58호
• /
• pp.41-47
• /
• 2000

Global(mega) event has increased throughout the 1990s, with the biggest surge occurring in the Asia-Pacific region. Along with this upward trend, competition for more desirable tourists is also surging, so destinations cannot be complacent (Getz, 1997). Event is appearing as the powerful method in the fierce competition around the industry. International events like 99 Hanam Environment Expo have been held annually in Korea since 1991 in which the local government system started. The main roles of event are to enhance the image of communities and attract tourists (Kotler and Haider and Rein, 1993), to strengthen destination attractiveness as drawing power (Mill and Morrison, 1985), and so on. Focused on the destination image, the research (Sirakaya and Sheppard and McLellan, 1997) about the effect of perceived safety at a potential vacation destination showed that destination marketers, travel agents, and hospitality industry members should be concerned with improving their images when such images are negative with regard to safety. Event industry in Korea does not seriously recognize the importance of the safety management against accidents known for tarnishing the destination images. Moreover few safety standards or studies for event industry can be found. This paper investigated the safety factors considered by visitors of 99 Hanam Environment Expo and analyzed the correlation between the safety factors and the demographic characteristics of the visitors.

• 복식문화연구
• /
• 제15권4호
• /
• pp.688-701
• /
• 2007

Since modem times, civilization of scientific technology has rapidly expanded and resulted in many negative aspects. Dystopia is a skeptical future standpoint newly introduced by surging awareness of these negative aspects. The purpose of this study is to discover the common characteristics by studying costumes displayed in dystopian films which have critical view of the future. This study is made through the research of sundry records, thesis and capture images from DVD system. As a result of the study, the common formative characteristics of future costumes appearing in six dystopian films are classified into external characteristics and internal characteristics. First, external characteristics were analyzed according to the form, material and color. Second, internal characteristics of costumes appearing in dystopian films are categorized as the indeterminate expression, ex-typical expression and uniform expression. The above formative characteristics of dystopian future costumes can be described as the embodiment of meanings of influence from present and future cultural changes in terms of the characteristics of fashion.

• 대한기계학회논문집B
• /
• 제24권7호
• /
• pp.895-906
• /
• 2000

A three dimensional linear frequency-domain lifting surface panel method was used for the aerodynamic analysis of axial flow type micro-fans. As proven by the duct modeling, the tip clearance of the micro-fans tested is large enough to ignore the calculated effect of the duct system. As the numerical results and experimental data agreed well in the operating point region, the method was applicable in the parametric studies to determine the design parameters of axial flow fans. Experiments on micro-fans were carried out based on KS B 6311. The newly designed micro-fan showed improvements in both static pressure rise and volumetric flow rate compared to the existing fans at a given operating condition. No detection of surging and the smooth characteristic curve proved the improvement in performance. To reduce the fan noise in the fan design, it was necessary to make use of the frequency spectrum analysis data. Measurement of sound pressure level for micro-fans was conducted based on KS B 6361 and KS A 0705. The peak - which occurs at blade passage frequency and its higher harmonics due to the fan noise - was not detected. This justifies the design methodology of the blade.

• International Journal of Fluid Machinery and Systems
• /
• 제9권1호
• /
• pp.17-27
• /
• 2016

Researches on the mechanism of surging and the surge behaviors in the systems of pumps, or fans or compressors, and the effects of flow-paths had been initiated and had made a great progress in Japan in the decades from the nineteen-forties to the nineteen-sixties. In 1947, the essential cause of the surges, i.e., self-excited oscillation nature of the flow-system, was discovered analytically by Professor Sumiji Fujii of Tokyo University, and most of the characteristic behaviors of the phenomena had been explained clearly. Successive studies by many other Japanese researchers continued to prove experimentally the mechanism, to extend the analytical studies, and to attempt preventing surge occurrence, etc. in the following two decades. The historical information on the early surge studies could be helpful to some concerned people. At the same time, the basic and plain ways of discussions and reasoning about the phenomena in the pioneering researches could give us much to be learned even in the present time of high-power computing systems. Regrettably, many of the original research works have been published only in Japanese. The present review introduces very briefly the situations in memories of the pioneering researchers and engineers.

• 한국해양공학회:학술대회논문집
• /
• 한국해양공학회 2003년도 춘계학술대회 논문집
• /
• pp.57-62
• /
• 2003

This paper describes the design and simulation of a multivariable optimal control system for the combined speed, heading and depth control of a Semi-Autonomous Underwater Vehicle (SAUV) developed in Korea Ocean Research and Development Institute (KRODI). The SAUV is a test-bed for the evaluation of the navigation and manipulator technologies developed for a mine disposal vehicle (MDV) in military use and for a light working underwater vehicle in scientific use. The vehicle was designed to control its cruising speed, heading and depth with 4 horizontal thrusters installed at the rear of the hull. Therefore, the decoupled control methods are limited to apply to the SAUV because the thrust forces are highly coupled with the surging, yawing, and pitching motion of the vehicle. The multivariable Linear Quadratic (LQ) control method is chosen to control steering and diving in variable speed motion automatically. A series of simulation is carried out with fully nonlinear six degree of freedom dynamic model to validate the controller.

• 한국정밀공학회지
• /
• 제28권12호
• /
• pp.1411-1418
• /
• 2011

In this study, to avoid surging in the system as a way to ensure the proper discharge requires the design of the valve capacity rating objective is to develop a program. Approximation algorithm for the capacity evaluation is suggested. Loss coefficients obtained by the algorithm is calculated put in the governing equation for the valve flow coefficient and capacity. Calculated values were compared with numerical analysis results for the verifying their validity. The proven formula is created using Excel and it can be easily available the valve design engineers. Creation of analysis models were using a version of Unigraphics NX 4.0, numerical analysis were using a flow analysis commercial program ANSYS CFX 12.0 version. Equations were referenced 'Handbook of Hydraulic Resistance - 3rd Edition'.

• 한국환경과학회지
• /
• 제28권10호
• /
• pp.887-898
• /
• 2019

Rehabilitation work is required to increase well productivity, which decreases with the elapsed time of pumping owing to the clogging of the water well. Clogging causes not only a reduction in the well productivity but also a deterioration of the water quality. For unclogging and rehabilitating wells, several techniques are used such as brushing, air surging, surge blocks, and gas impulse. In this study, the high-pressure air impulse technique, which effectively and economically rehabilitates wells, was applied to a riverbank filtration site in Korea for the same objective. At most of the wells, the hydraulic parameters (transmissivity, storage coefficient, and specific capacity) were increased by the application of the high-pressure air impulse technique. The well loss change values also indicate an increase in the hydraulic parameters by the air impulse implementation. Thus, the high-pressure air impulse technique can be efficiently and economically applied to water and riverbank filtration wells for rehabilitating the decreased productivity.

• 한국컴퓨터정보학회논문지
• /
• 제24권8호
• /
• pp.45-50
• /
• 2019

Oculus Rift is the most universal VR (virtual Reality) headset for gamers and FPS (First Person Shooting) is the most suitable game genre to play with VR. Using VR can increase the player's sense of reality and make them feel as though they are in direct contact with the enemy while battling. The suggested VR game is a first person game where the player must defend a specific target against the surging enemy all within the time limit. Many objects will need to be used in this method. Object pooling will be used in order to manage all the numerous objects. When an object is repeatedly created and deleted it typically overwhelms the memory. To resolve this issue the game initially summons the object at the beginning of the scene and afterwards only uses the object when needed, lessening the burden on the memory. A ranking system is implemented to keep the game records in order to stimulate a competitive spirit between the players, and the game has received positive response during test play among college students in their 20s.

• Archives of Plastic Surgery
• /
• 제46권3호
• /
• pp.189-197
• /
• 2019

There has been an exponential increase in plastic surgery cases over the last 20 years, surging from 2.8 million to 17.5 million cases per year. Seventy-two percent of these cases are being performed in the office-based or ambulatory setting. There are certain advantages to performing aesthetic procedures in the office, but several widely publicized fatalities and malpractice claims has put the spotlight on patient safety and the lack of uniform regulation of office-based practices. While 33 states currently have legislation for office-based surgery and anesthesia, 17 states have no mandate to report patient deaths or adverse outcomes. The literature on office-base surgery and anesthesia has demonstrated significant improvements in patient safety over the last 20 years. In the following review of the proceedings from the PRS Korea 2018 meeting, we discuss several key concepts regarding safe anesthesia for office-based cosmetic surgery. These include the safe delivery of oxygen, appropriate local anesthetic usage and the avoidance of local anesthetic toxicity, the implementation of Enhanced Recovery after Surgery protocols, multimodal analgesic techniques with less reliance on narcotic pain medications, the use of surgical safety checklists, and incorporating "the patient" into the surgical decision-making process through decision aids.