• Title/Summary/Keyword: Surfacing

Search Result 76, Processing Time 0.025 seconds

Studies on the Wood Properties of Lesser-Known Species Grown in Indonesia(IV) -The Fundamental Wood Properties of Tamiang, Bangelem and Kamasulan- (인도네시아산 미이용 수종의 목재성질(IV) - Tamiang, Bangelem 및 Kamasulan 목재의 기초성질 -)

  • 정성호;정두진;박병수;이도식;조성택;이동협;홍인표;전수경
    • Journal of the Korea Furniture Society
    • /
    • v.11 no.2
    • /
    • pp.25-35
    • /
    • 2000
  • This study was carried out to investigate the wood properties for development the proper uses of lesser-known tree species. The tested species are Tamiang(Hydnocarpus woodii) Bangelem (Strombosia zeylanica) and Kamasulan(Anisophyllea ferruginea) grown in Indonesia. fundamental wood properties such as anatomical, physical and chemical properties and characteristics related to wood processing were examined. The results are summarized as follows : These species are diffuse porous, interlocked grained and coarse textured wood. Exceptionally, texture of Tamiang is fine. The heartwoods of these species are not distinguished clearly to the sapwoods. These species have high specific gravity, high shrinkage, and excellent strength properties. However, Tamiang has moderate specific gravity. Sawing characteristics are poor for these species except Tamiang. Sawing characteristics is moderate for Tamiang. Drying characteristics are moderate for Tamiang and Bangelem, and Poor for Kamasulan. The surfacing characteristics by planer are moderate f3r all these species. Bending property and durability are poor. Ash content is low in Bangelem.

  • PDF

Design thermal loading for composite bridges in tropical region

  • Au, F.T.K.;Cheung, S.K.;Tham, L.G.
    • Steel and Composite Structures
    • /
    • v.2 no.6
    • /
    • pp.441-460
    • /
    • 2002
  • In the design of bridges, it is important to consider the thermal stresses induced by the non-linear temperature distribution as well as the variation of effective temperature in the bridge deck. To cope with this, design temperature profiles are provided by design codes, which are normally based on extensive research work. This paper presents the results of a comprehensive investigation on the thermal behaviour of bridges in Hong Kong with special emphasis on composite bridges. The temperature distribution in bridges depends primarily on the solar radiation, ambient air temperature and wind speed in the vicinity. Apart from data of the meteorological factors, good estimates of the thermal properties of material and the film coefficients are necessary for the prediction of temperature distribution. The design temperature profiles for various types of composite bridge deck with bituminous surfacing and concrete slab of different thicknesses are proposed. The factors affecting the design effective temperature are also reviewed and suitable values for Hong Kong are proposed. Results are compared with recommendations of the current local code. The method facilitates the development of site-specific temperature profiles for code documents, and it can also be applied to create zoning maps for temperature loading for large countries where there are great climatic differences.

Computational Flow Analysis and Drag Coefficient Research for Angle of Attack in Slocum Underwater Glider (Slocum 수중 글라이더의 유영 받음각에 대한 전산유동해석 및 항력계수 연구)

  • Park, Jeong-Woo;Lee, Jung-Woo;Choi, Young-Ho;Seo, Kap-Ho;Suh, Jin-Ho;Park, Jong-Jin
    • Journal of Ocean Engineering and Technology
    • /
    • v.30 no.5
    • /
    • pp.381-388
    • /
    • 2016
  • An underwater glider makes it easy to explore a wide area with low power. However, an underwater glider is difficult to use for rapid collection, because the surfacing location cannot be predicted after a dive. Thus, simulation research is needed to predict the swimming path. In this paper, based on research, a linearized equation is derived for the drag coefficient at each angle of attack by assuming the boundary conditions for the Slocum underwater glider and performing a computational flow analysis.

Knowledge, Attitude, and Preventive Behaviors related to Middle East Respiratory Syndrome (MERS) in Adults (성인의 중동호흡기증후군(MERS)에 대한 지식, 태도, 예방행위)

  • Park, Su Ho
    • Journal of Korean Public Health Nursing
    • /
    • v.33 no.1
    • /
    • pp.33-46
    • /
    • 2019
  • Purpose: Individuals suspected Middle East Respiratory Syndrome (MERS) are continuously surfacing in Korea. study the Korean public's knowledge, attitude, and preventive behaviors related to MERS as well as the factors that affect preventive behaviors for MERS. Methods: The study used a descriptive research design, and included 196 men and women aged 20 to 65 years. Data were collected through Internet surveys and self-reported questionnaires from December 1 to 30, 2017. Results: Among the participants, 88.7 percent knew cough etiquette, 84.7 percent had education about cough etiquette, and 52.6 percent had received education on MERS. The average scores for knowledge of MERS was $73.60{\pm}18.78$; attitude of MERS, $2.22{\pm}0.92$; and preventive behaviors for MERS, $62.43{\pm}16.11$. egression analysis showed that higher knowledge of MERS (${\beta}=.34$, p<.001) and higher attitude of MERS (${\beta}=.05$, p=<.001) resulted in increased preventive behaviors, people with MERS education increased preventive behaviors (${\beta}=.21$, p=.003). Conclusion: the awareness and knowledge of MERS for promoting related preventive behaviors. Therefore, education content that considers the characteristics of the target population should be organized and expanded multiple channels.

Structural Analysis and Safety Assessment of KS D 3631 Gas Pipeline Repaired by Carbon Fiber Composite Material Sleeve (탄소섬유복합재료 슬리브로 보수된 KS D 3631 배관의 구조 해석 및 안정성 평가)

  • Choi, Jongmin;Kim, Hansang;Cho, Sungmin;Lee, Seungkuk
    • Journal of the Korean Institute of Gas
    • /
    • v.20 no.5
    • /
    • pp.96-103
    • /
    • 2016
  • Proper repair methods of damaged city gas pipeline is important factor to safely transmit gas and to reduce economical loss caused by failure of gas pipelines. Repair methods such as surfacing, type-A and type-B welding and composite sleeve method have been used to repair damaged city gas pipelines. In this paper, among repair methods, composite sleeve repair methods were conducted since they are rather simple processes and their repair quality is not sensitive to workers' ability compared with other repair methods. We discussed composite repair processes especially using carbon fiber prepregs and the experimental results.

Effect of light and sediment grain size on the vertical migration of benthic diatoms

  • Du, Guo Ying;Oak, Jung-Hyun;Li, Hongbo;Chung, Ik-Kyo
    • ALGAE
    • /
    • v.25 no.3
    • /
    • pp.133-140
    • /
    • 2010
  • Using chlorophyll fluorescence, the vertical migration of benthic diatoms responding to light intensity and affected by sediment grain size was studied. Minimal fluorescence ($F_o$) of surface sediment was measured by imaging pulse amplitude modulated (Imaging-PAM) fluorometer, and used to monitor diatom biomass variation in surface sediments. The test diatoms, Amphora coffeaeformis (C. Agardh) K$\ddot{u}$tzing and Cylindrotheca closterium (Ehrenberg) Reimann & Lewin, migrated to the sediment surface under irradiance from 50 to 500 ${\mu}mol$ photons $m^{-2}s^{-1}$. However, the diatoms exhibited no evident increase of surface biomass under dark conditions, and even showed slightly decrease of surface biomass under irradiances over 1,000 ${\mu}mol$ photons $m^{-2}s^{-1}$. The light intensity inducing the maximum surface migration of A. coffeaeformis was 100 ${\mu}mol$ photons $m^{-2}s^{-1}$, while the light intensity producing the same effect for C. closterium was 250 ${\mu}mol$ photons $m^{-2}s^{-1}$. C. closterium showed higher motility than A. coffeaeformis. Faster diatom surfacing was observed in larger grain size sediments (125-335 ${\mu}m$) than smaller ones (63-125 ${\mu}m$). This study confirmed the significant influence of light as a main triggering factor behind migration, indicated the distinct effect of different sediment grain size, and highlighted the species-specific migratory ability.

A Case Study on the Relationship between Children's Play Behaviors and Outdoor Play Environments of Child Care Center in Daejeon (실외놀이터 환경 특성과 아동 놀이행동과의 관계성 - 대전지역 어린이집의 사례분석을 중심으로 -)

  • Choi, Mock-Wha;Byun, Hea-Ryong
    • Korean Journal of Human Ecology
    • /
    • v.15 no.6
    • /
    • pp.919-935
    • /
    • 2006
  • The purpose of this study was to analyze the relationship between outdoor play environments and child's play behaviors. The data were collected by field measurement survey, and non-participatory observation from 9 child care centers in Daejeon. The field measurement survey were conducted from June 20 to July 20, 2004, whereas non-participatory behavior observation were conducted from September 2 to October 10, 2004. The major results showed the following. 1) The characteristics of outdoor play environment in child care centers showed that most of them were too small and did not use the adequate surfacing to play various activities. In many cases, outdoor play settings was made of play equipment setting, play props and manipulative settings, and tree/vegetation. 2) Child's play behavior has been focused on functional play activity and construction play activity. 3) The relationship between outdoor play environments and child's play behaviors showed that small outside play environment with monotonous construction and multi-complex play equipments produced functional play behaviors on children. On the other hand, where various play areas were put together, we could observe relatively diverse play behaviors. However, in some cases, despite the small and monotonous play area, diverse play behaviors were observed. These playgrounds at least differed from others in that they provided the place where multi purpose play was possible. This finding shows that multi purpose play areas can be an alternative in small playground environment.

  • PDF

Analysis of Adaptation for The first-time Progressive Lenses Glasses Wearers (누진렌즈 안경 처음 착용자의 적응도 분석)

  • Shim, Jun-Beom;Shim, Hyun-Seog
    • Journal of Korean Ophthalmic Optics Society
    • /
    • v.16 no.2
    • /
    • pp.117-122
    • /
    • 2011
  • Purpose: This study analyzed the factors related to adaptation of people who wears progressive lenses glasses for the first time. Methods: 463 presbyopia (Aged 41~78) without any ocular diseases with the progressive lens glasses were prescribed from 2010 to 2011 at B clinic in the Gwangju city. Progressive lenses adaptation were analyzed according to gender, age, distance refractive state, presbyopic addition, progressive lens design, the old glasses, astigmatism type, and anisometropia etc. High, mid and low-adapted groups were categorized as the status of wearing progressive lenses glasses, re-wearing, occasionally wearing and failed to weraing, respectively. Results: Men showed significantly higher adaptation (p=0.02) than women. Presbyopic addition (p=0.05) and progressive lens design (p=0.02) were statistically significant. However, it was found that there was so statistical significance for the factors of age, distance refractive state, the old glasses, astigmatism type, and anisometropia. Conclusions: According to the results of this study, when progressive lenses were prescribed, we should consider for adaptation gender, presbyopic addition, and progressive lens design etc.

Characteristics Evaluation and Development of Peach Washing System (복숭아의 세척시스템 개발 및 특성 평가)

  • Lee, Hyun-Seok;Kwon, Ki-Hyun;Jeong, Jin-Woong;Kim, Byeong-Sam;Cha, Hwan-Soo
    • Journal of Biosystems Engineering
    • /
    • v.34 no.6
    • /
    • pp.446-453
    • /
    • 2009
  • This study was conducted to find condition of improving the quality of peach by using surfacing washing system. The rate of weight loss of A,B groups were showed slower decreasing trend than CT group and the value of soluble solid degree was not different significantly among all groups from the results of stored peach treat with surface washing system of peach in the first experiment. The colory value of surface were increased with increasing storage period in all treatments. Browning pace of A,B groups were slower than control. Emission of carbon dioxide was increased from the results of respiration rate, 6-10 mL/kg/hr $(10^{\circ}C)$ and 32-41 mL/kg/hr $(25^{\circ}C)$. In second experiment with surface washing system of peach, the value of soluble solid was showed with similar value from 10 $Brix^{\circ}$ to 13 $Brix^{\circ}$. The pace of soft rot of EW groups were lower than CT groups from the results of hardness during storage period. The results of colory value was not showed with significant difference in $15^{\circ}C$ and $20^{\circ}C$ storage temperature but changed to browning in EW groups. The moisture contents was from 85% to 90% in all groups. And the count of total microorganism of EW groups were lower than control. Also total coliform of EW groups were negative. In sensory evaluation, washing peach was showed higher value with significant difference in all acceptability.

A study on the hard surfacing Characteristics of STS420J2 by using Diode laser (Diode laser를 이용한 STS420J2의 표면경화 특성에 관한 연구)

  • Lee, Tae-Yang;Lim, Byung-Chul;Park, Sang-Heup
    • Journal of the Korea Academia-Industrial cooperation Society
    • /
    • v.15 no.9
    • /
    • pp.5460-5466
    • /
    • 2014
  • In this study, mainly for kitchen knives and small swords, cutlery, etc. STS420J2 used material used for the experiments. In order to cure the surface of the test piece after the rough grinding and fine grinding was performed in order polishing. Perform the surface hardening of STS420J2 local area by using a diode laser. The output of the laser diode and the feed rate to the process variable. Micro-hardness testing, microstructure testing, scanning electron microscope testing(SEM), the heat input to the analysis. After analyzing the experiment to compare the mechanical properties of the material. When using a diode laser to assess the soundness of the surface hardening. Accordingly, the process for deriving the optimum demonstrate the feasibility.