• Journal of the Korean Society of Food Science and Nutrition
• /
• v.33 no.8
• /
• pp.1385-1389
• /
• 2004

For the development of better Gulbi processing, brine salting method was applied for the Yellow croaker (Larimichthys polyactis). The changes of moisture contents, salt contents, and total microbial numbers in Yellow croaker were measured following different brine concentration (20, 30%), temperature (5, 25, 35$^{\circ}C$), and soaking time (1, 6, 12, 24 hours) by brine salting method. Rate of salt penetration into Yellow croaker muscle increased as higher brine concentration and higher dipping temperature. When compared to commercial products of Gulbi by dry-salting method, the moisture and salt contents in Yellow croaker showed similar values after treated with 20% brine at $25^{\circ}C$ for 1 hour. The weight of Yellow croaker increased about 4% when immersed it in 20% brine at 5$^{\circ}C$ for 24 hours. There was no weight change at $25^{\circ}C$ dipping temperature and reduced 7% of weight at 35$^{\circ}C$ dipping temperature. At 30% brine concentration, the weight of Yellow croaker reduced 1%, 9%, and 13% on weight at 5$^{\circ}C$, $25^{\circ}C$, and 35$^{\circ}C$, respectively. Total microbial counts in Yellow croaker muscle soaked at 30% brine showed 1 log lower numbers than 20%. The muscles had about 1 log higher microbial numbers than the treated brine solution. An ethanol extract of onion peel added to brine for giving better color and for preventing oxidation on Gulbi lipid. The treated group showed higher Land b values on Gulbi surface as well as antioxidant effect on the extracted oil.

• The Journal of the Acoustical Society of Korea
• /
• v.13 no.6
• /
• pp.75-82
• /
• 1994

The ray paths and travel times of sound wave in the ocean depend on the physical properties of the propagating media. Ocean Acoustic Tomography(OAT), which is inversely estimate the travel time variations between fixed sources and receivers the physical properties of the corresponding media can he understood. To apply ocean survey technology by using the OAT, the tomographic procedure requires forward problem that variation of the travel times be identified with the variability of the medium. Also, received signals must be satisfied the necessary conditions of ray path stability, identification and resolution in order for OAT to work. The canonical ocean has been determined based on the historical data and its travel time and ray path are used as reference values. The sound speed of canonical ocean in the East Sea is about 1523 m/s at the surface and 1458 m/s at the sound channel axis(400m). Sound speeds in the East Sea are perturbed by warm eddy whose horizontal extension is more than 100 km with deeper than 200 m in depth scale. In this study, an acoustic source and receiver are placed at the depth above the sound channel axis, 350 m, and are separated by 200 km range. Ray paths are identified by the ray theory methed in a range dependent medium whose sound speeds are functions of a range and depth. The eigenray information obtained from interpolation between the rays bracketing the receiver are used to simulate the received signal by convolution of source signal with the eigenray informations. The source signal is taken as a 400 Hz rectangular pulse signal, bandwidth is 16 Hz and pulse length is 64 ms. According to the analysis of the received signal and identified ray path by using numerical model of underwater sound propagation, simulated signals satisfy the necessary conditions of OAT, applied in the East Sea.

• Journal of the Mineralogical Society of Korea
• /
• v.7 no.1
• /
• pp.62-79
• /
• 1994

The quanttative and structural analysis of the binary standard mixtures of albite and quartz, and microcline and albite were carried out using the Rietveld refinement method in order to investigate the accuracy and precision of the method. The quantitative analysis using the Rietveld method results in a standard deviation of 4 wt % for the albite-quartz standard mixtures and 1 wt % for the microcline-albite standard mixtures, suggesting that its accuracy is far better than that of the conventional XRD method in which only a few selected peaks are utilized. Furthermore, the unit-cell parameters of component minerals in mixtures were also estimated accurately during the analysis. It was observed that the refined weight fractions deviate systematically from their measured values when the method is applied to the mixtures that contain minerals with different degrees of preferred orientation, such as albite-quartz mixtures. The preferred orientation parameters and R-values suggest that the systematic deviation is caused as a result of the preferred orientation effect of feldspar crystallites. It is evident that the preferred orientation corrections are of help for the accurate determination of unit-cell parameters, although they may not improve the result of quantitative analysis significantly. The refined weight fraction of the mineral with higher degree of preferred orientation in mixture is greater than the measured one. This is apparently caused by the effect of geometry of feldspar crystallites in the surface of the mounted sample. The Rietveld refinement method minimizes the problems inherent in the traditional XRD methods, such as the line overlap, primary extinction, and preferred orientation effect, by fitting every data point in a whole pattern explicitly. Furthermore, accurate unit-cell parameters as well as scale factors that can be obtained from the Rietveld refinement are used for the quqantification. The present stdudy demonstrates that the Rietveld method yields far more accurate analytical result than the conventional XRD quantitative analysis method does.

• Korean Journal of Remote Sensing
• /
• v.30 no.1
• /
• pp.61-73
• /
• 2014

This study reviewed an application of water quality estimation using an Airborne Hyperspectral Imagery (A-HSI) and tested a part of Han River water quality (especially suspended solid) estimation with available in-situ data. The estimation of water quality was processed two methods. One is using observation data as downwelling radiance to water surface and as scattering and reflectance into water body. Other is linear regression analysis with water quality in-situ measurement and upwelling data as at-sensor radiance (or reflectance). Both methods drive meaningful results of RS estimation. However it has more effects on the auxiliary dataset as water quality in-situ measurement and water body scattering measurement. The test processed a part of Han River located Paldang-dam downstream. We applied linear regression analysis with AISA eagle hyperspectral sensor data and water quality measurement in-situ data. The result of linear regression for a meaningful band combination shows $-24.847+0.013L_{560}$ as 560 nm in radiance (L) with 0.985 R-square. To comparison with Multispectral Imagery (MSI) case, we make simulated Landsat TM by spectral resampling. The regression using MSI shows -55.932 + 33.881 (TM1/TM3) as radiance with 0.968 R-square. Suspended Solid (SS) concentration was about 3.75 mg/l at in-situ data and estimated SS concentration by A-HIS was about 3.65 mg/l, and about 5.85mg/l with MSI with same location. It shows overestimation trends case of estimating using MSI. In order to upgrade value for practical use and to estimate more precisely, it needs that minimizing sun glint effect into whole image, constructing elaborate flight plan considering solar altitude angle, and making good pre-processing and calibration system. We found some limitations and restrictions such as precise atmospheric correction, sample count of water quality measurement, retrieve spectral bands into A-HSI, adequate linear regression model selection, and quantitative calibration/validation method through the literature review and test adopted general methods.

• Korean Journal of Remote Sensing
• /
• v.32 no.2
• /
• pp.105-118
• /
• 2016

The purpose of this study is to improve the classification system of sub-divided land cover map among the land cover maps provided by the Ministry of Environment. To accomplish the purpose, first, the overseas country land cover map classification items were examined in priority. Second, the area ratio of each item established by applying the previous sub-divided classification system was analyzed. Third, the survey on the improvement of classification system targeting the users (experts and general public) who actually used the sub-divided land cover map was carried out. Fourth, a new classification system which improved the previous system by reclassifying 41 classification items into 33 items was finally established. Fifth, the established land cover classification items were applied on study area, and the land cover classification result according to the improvement method was compared with the previous classification system. Ilsan area in Goyang city where there are diverse geographic features with various land surface characteristics such as the urbanization area and agricultural land were distributed evenly were selected as the study area. The basic images used in this study were 0.25 m aerial ortho-photographs captured by the National Geographic Information Institute (NGII), and digital topographic map, detailed stock map plan, land registration map and administrative area map were used as the relevant reference data. As a result of applying the improved classification system into the study area, the area of culture-sports, leisure facilities was $1.84km^2$ which was approximately more than twice larger in comparison to the previous classification system. Other areas such as transportation and communication system and educational administration facilities were not classified. The result of this study has meaningful significance that it reflects the efficiency for the establishment and renewal of sub-divided land cover map in the future and actual users' needs.

• Korean Journal of Remote Sensing
• /
• v.30 no.4
• /
• pp.525-536
• /
• 2014

In this study, a method to assess and monitor hydrological drought using remote sensing was investigated for use in regions with limited observation data, and was applied to the Upper Namhangang basin in South Korea, which was seriously affected by the 2008-2009 drought. Drought information may be obtained more easily from meteorological data based on water balance than hydrological data that are hard to estimate. Air temperature data at 2 m above ground level (AGL) were estimated using remotely sensed data, evapotranspiration was estimated from the air temperature, and the correlations between precipitation minus evapotranspiration (P-PET) and streamflow percentiles were examined. Land Surface Temperature data with $1{\times}1km$ spatial resolution as well as Atmospheric Profile data with $5{\times}5km$ spatial resolution from MODIS sensor on board Aqua satellite were used to estimate monthly maximum and minimum air temperature in South Korea. Evapotranspiration was estimated from the maximum and minimum air temperature using the Hargreaves method and the estimates were compared to existing data of the University of Montana based on Penman-Monteith method showing smaller coefficient of determination values but smaller error values. Precipitation was obtained from TRMM monthly rainfall data, and the correlations of 1-, 3-, 6-, and 12-month P-PET percentiles with streamflow percentiles were analyzed for the Upper Namhan-gang basin in South Korea. The 1-month P-PET percentile during JJA (r = 0.89, tau = 0.71) and SON (r = 0.63, tau = 0.47) in the Upper Namhan-gang basin are highly correlated with the streamflow percentile with 95% confidence level. Since the effect of precipitation in the basin is especially high, the correlation between evapotranspiration percentile and streamflow percentile is positive. These results indicate that remote sensing-based P-PET estimates can be used for the assessment and monitoring of hydrological drought. The high spatial resolution estimates can be used in the decision-making process to minimize the adverse impacts of hydrological drought and to establish differentiated measures coping with drought.

• Korean Journal of Soil Science and Fertilizer
• /
• v.34 no.4
• /
• pp.255-264
• /
• 2001

This study was conducted to investigate changes in inorganic phosphorus fractions in phosphorus accumulated plastic film house soils under cropping condition. Pot experiment was conducted with surface soils taken from plastic film house fields cultivated for 3, 8 and 16 years. Phosphorus fertilizer was applied at the rates of 0 (P0), $100kg\;ha^{-1}$ (recommended application rate. P1) and $200kg\;ha^{-1}$ (P2) as fused phosphate. Crops were grown sequentially in the order of corn-Chinese cabbage-Chinese cabbage-corn for 3 years. The content of easily soluble-P fraction was decreased with cropping. There were significantly positive relationship not only between the contents of easily soluble-P and the amounts of soil available P ($r=0.839^{**}{\sim}0.952^{**}$ for Bray-1 P, $r=0.895^{**}{\sim}0.967^{**}$ for Lancaster P, and $r=0.491^{**}{\sim}0.821^{**}$ for Olsen P), but also between the amounts of P absorbed by plants and the amounts of easily soluble P decreased ($r=0.644^{**}{\sim}0.822^{**}$). The decrease of easily soluble-P during cropping period could be described by a first-order reaction. The number of cropping times needed to decrease the content of easily soluble-P to an index level of $0.2mg\;kg^{-1}$, which is commonly reported as the desired concentration for soil P, was predicted in the range of 26~33 cropping times by using the equations. Regardless of P fertilization, the proportion of Al-P to total P was little varied during cropping period, but the proportion of Fe-P to total P increased with cropping. Although the content of Ca-P was high before cropping, the proportion of Ca-P to total P was increased with cropping. The proportion of reductant soluble-P to total P was little varied for P fertilizer treatment but was increased for no P fertilizer treatment. The residual-P was decreased during cropping period due to the absorption by crops and the conversion to other inorganic P fractions.

• Korean Journal of Soil Science and Fertilizer
• /
• v.45 no.6
• /
• pp.1194-1202
• /
• 2012

Remotely sensed satellite images can be applied to monitor and obtain land surface information on inaccessible areas. We classified paddy field area in North Korea based on on-screen digitization with visual interpretation using 291 RapidEye satellite images covering the whole country. Criteria for paddy field classification based on RapidEye imagery acquired at different time of rice growth period was defined. Darker colored fields with regular shape in the images with false color composite from early May to late June were detected as rice fields. From early July to late September, it was hard to discriminate rice canopy from other type of vegetation including upland crops, grass, and forest in the image. Regular form of readjusted rice field in the plains and uniform texture when compared with surrounding vegetation. Paddy fields classified from RapidEye imagery were mapped and the areas were calculated by administrative district, province or city. Sixty six percent of paddy fields ($3,521km^2$) were distributed in the west coastal regions including Pyeongannam-do, Pyeonganbuk-do, and Hwanghaenam-do. The paddy field areas classified from RapidEye images showed less than 1% of difference from the paddy field areas of North Korea reported by FAO/WFP (Food and Agriculture Organization/World Food Programme).

• Journal of Korean Society of Environmental Engineers
• /
• v.39 no.5
• /
• pp.246-254
• /
• 2017

Microcystin-LR (MC-LR) is one of most abundant microcystins, and is derived from blue-green algae bloom. Advanced oxidation processes (AOPs) are effective process when high concentrations of MC-LR are released into a drinking water treatment system from surface water. In particular, UV-based AOPs such as UV, $UV/H_2O_2$, $UV/O_3$ and $UV/TiO_2$ have been studied for the removal of MC-LR. In this study, UV-LED was applied for the degradation of MC-LR because UV lamps have demonstrated some weaknesses, such as frequent replacements; that generate mercury waste and high heat loss. Degradation efficiencies of the MC-LR (initial conc. = $100{\mu}g/L$) were 30% and 95.9% using LED-L (280 nm, $0.024mW/cm^2$) and LED-H (280 nm, $2.18mW/cm^2$), respectively. Aromatic compounds of natural organic matter changed to aliphatic compounds under the LED-H irradiation by LC-OCD analysis. For application to raw water, the Nak-dong River was sampled during summer when blue-green algae were heavy bloom in 2016. The concentration of extracellular and total MC-LR, geosmin and 2-MIB slightly decreased by increasing the LED-L irradiation; however, the removal of MC-LR by UV-LED (${\lambda}=280nm$) was insufficient. Thus, advanced UV-LED technology or the addition of oxidants with UV-LED is required to obtain better degradation efficiency of MC-LR.

• Journal of the Korean Society for Marine Environment & Energy
• /
• v.10 no.2
• /
• pp.67-85
• /
• 2007

A three-dimensional hydrodynamic model with the fine grid is applied to simulate the barotropic tides, tidal currents, residual currents and salinity dispersions in the Yellow Sea and the East China Sea. Data inputs include seasonal hydrography, mean wind and river input, and oceanic tides. Computed tidal distributions of four major tides($M_2,\;S_2,\;K_1$ and $O_1$) are presented and results are in good agreement with the observations in the domain. The model reproduces well the tidal charts. The tidal residual current is relatively strong around west coast of Korea including the Cheju Island and southern coast of China. The current by $M_2$ has a maximum speed of 10 cm/s in the vicinity of Cheju Island with a anti-clockwise circulation in the Yellow Sea. General tendency of the current, however, is to flow eastward in the South Sea. Surface residual current simulated with $M_2$ and with $M_2+S_2+K_1+O_1$ tidal forcing shows slightly different patterns in the East China Sea. The model shows that the southerly wind reduces the southward current created by freshwater discharge. In summer during high runoff(mean discharge about $50,000\;m^3/s$ of Yangtze), low salinity plume-like structure(with S < 30.0 psu) extending some 160 km toward the northeast and Changjiang Diluted Water(CDW), below salinity 26 psu, was found within about 95 km. The offshore dispersion of the Changjiang outflow water is enhanced by the prevailing southerly wind. It is estimated that the inertia of the river discharge cannot exclusively reach the around sea of Cheju Island. It is noted that spatial and temporal distribution of salinity and the other materials are controlled by mixture of Changjiang discharge, prevailing wind, advection by flowing warm current and tidal current.