현재 우리나라에서는 하수슬러지의 매립과 해양투기가 금지되면서 슬러지의 적정처리 처분이 심각한 사회문제로 대두되고 있다. 또한 국내 해안 양식업중에 비중이 높은 굴양식업에서 부산물로 다량 발생하는 굴껍질은 대부분 해안에 야적되어 연안어장의 오염, 공유수면 관리상의 지장, 자연경관의 훼손 및 보건위생상의 문제 등으로 환경문제를 초래하고 있다. 본 연구에서는 하수슬러지와 굴껍질의 재활용 측면에서 토지주입시 발생되는 금속성분의 용출특성을 검토하는데 그 목적이 있다. 용출 실험은 직경 100mm, 높이 100mm인 pot에 토양과 하수슬러지 및 굴껍질을 주입하였으며, 인공강우를 가하여 100일 동안 분석하였다. 실험결과 식물의 성장에 필수원소인 K, Na, Ca, Mg과 인체에 치명적인 유해중금속인 Cd, Cu, As, Pb, Cr, Hg은 모두 토양오염기준에 적합하게 판정되어 토양에 적용시 그 위해성이 적은 것으로 나타났다. 이는 굴껍질(pH 8.7) 과 하수슬러지(pH 6.8)를 밭토양(pH 5.2)에 적용한 결과 pH 완충능력을 가져와 금속성분을 용출을 억제시킨 것으로 판단된다.
Park, So-Young;Bae, Kwang-Shik;Lim, Sung-Sam;Baek, Seung-Ho
대한치과보존학회:학술대회논문집
/
대한치과보존학회 2001년도 춘계학술대회
/
pp.247-251
/
2001
;A dental developmental anomaly is defined as an isolated aberration in tooth form, caused by a disturbance or abnormality which occurred during tooth development. There are numerous types of dental anomalies, and a considerable variation in the extent of the defects occurs with each type. Teeth with these anomalies pose unique challenges. Since the defects are not always apparent clinically, they can confuse diagnosticians investigating the etiology of pulpal pathosis. When endodontic treatment is required, the defects often hinder access cavity preparation and canal instrumentation. Treatment planning also becomes more challenging, since the defects can create complicated periodontal problems, and the malformed teeth can be difficult to restore, particularly those weakened by endodontic therapy. Fusion is defined as the joining of two developing tooth germs resulting in a single large tooth structure. The incidence of fusion is < 1% in the Caucasian population, and it is believed that physical force or pressure produces contact of the developing teeth. Clinically and radiographically, a fused tooth usually appears as one large crown with at least partially separated roots and root canals. There may be a vertical groove in the tooth crown delineating the originally separate crowns. Dens invaginatus is a deep surface invagination of the crown or root that is lined by enamel. Teeth in both maxillary and mandibular arches may be affected, but the permanent maxillary lateral incisor is the tooth most commonly involved. Studies have revealed an incidence ranging from 0.25% to as high as 10%. The invagination ranges from a slight pitting to an anomaly occupying most of the crown and root. The invagination frequently communicates with the oral cavity, allowing the entry of irritants and microorganism either directly into pulpal tissues or into an area that is deparated from pulpal tissues by only a thin layer of enamel and dentin. This continuous ingress of irritants and the subsequent inflammation usually lead to necrosis of the adjacent pulp tissue and then to periapical or periodontal abscesses. If the invagination extends from the crown to the periradicular tissue and has no communication with the root canal system, the pulp may remain vital. Recommended treatment of fused tooth and dens invaginatus has been reported in the endodontic literature. This case report describes the endodontic treatment of a maxillary laterl incisors having fused crown and dens invaginatus.natus.
포항중성리신라비는 2009년 경상북도 포항시에서 발견되었다. 부정형 형태를 가진 비석의 크기는 최대높이 105cm, 너비 47.6~49.6cm, 두께 13.8~14.7cm, 무게는 115kg이다. 비석은 흑운모화강암이며 보존처리 공정은 훼손지도 제작, 표면 오염물 세척, 에틸실리케이트를 이용한 강화처리 순서로 진행하였다. 레이저를 이용한 검은색 표면 오염물 제거를 위해 표면의 60%이상을 덮고 있는 검은색 오염물을 분석하였다. 분석목적은 오염물 확인 뿐 만 아니라 동일한 오염물을 가진 암석을 확보하여 예비세척을 실시하기 위해서다. 암석 확보를 위한 현장조사 중 경주남산 시료를 p-XRF로 분석한 결과 역시 중성리신라비와 유사하게 Mn이 높게 검출되었다. 중성리신라비와 같이 동일 오염물로 확인된 암석을 10개의 샘플로($5cm{\times}5cm$) 제작하여 Nd/YAG Laser로 예비 세척하였다. 포터블현미경을 이용한 표면 관찰 결과 파워 460mJ, 파장 1,064nm, 방사횟수는 $25cm^2$당 1,800~2,300회가 가장 효과적이었다. 위의 조건을 감안하여 비석 전체를 세척 후 강화처리 하였으며 보존처리에 대한 평가는 색차계 측정 및 성분분석을 통해 오염물 제거 정도를 확인하였다. 색차계 측정 결과 명도($L^*$)값이 $33{\rightarrow}49$로 상승하여 밝아진 것을 수치로 확인하였으며 성분분석 결과 Mn 함량이 $50,000{\pm}5,000ppm{\rightarrow}10,000{\pm}2,000pmm$로 80%가량 감소하여 오염물 역시 줄어들었음을 알 수 있다.
Comparative studies of the effects of rates and frequency of application of dairy slurry on herbage yield and stand persistence of alfalfa and various forage grasses have not previously been conducted. The results being reported here are part of a larger study having a primary objective of comparing the effectiveness of alfalfa (Medicago sativa L.), various grasses and alfalfa-grass mixtures for utilizing nutrients from applied dairy slurry. The objectives of this part of the study were to evaluate the effects of various rates and frequencies of application of slurry on herbage yield and stand persistence of orchardgrass (Dactylis glomerata L.), reed canarygrass (Phalaris arundinacea L.), and alfalfa-orchanrdgreass and alfalfa-reed canarygrass mixtures managed as a 4-cutting management system. A randomized complete block design with treatments in a split plot arrangement with four replicates was used. The main plots consisted of 9 fertility treatments: 7 slurry rate and time of application treatments, one inorganic fertilizer treatment, and an unfertilized control. The sub-plots consisted of the two grasses and two alfalfa-grass mixture mentioned above. Slurry was composed from stored solids scraped from the alleyways of a free-stall housing barn and water added to form a slurry having about 8% solids. Manure was pumped from a liquid spreader tank into 10.4 L garden water cans for manual application to the plots. Herbage yields within species were generally unaffected by various rates of application in the first production year. Herbage yields of grasses and alfalfa-grass mixtures the second year were generally not affected by frequency of application for the same rate of slurry applied. Slurry application resulted in greater herbage yield increases in grasses than alfalfa-grass mixtures in the 4-cutting management system. In general, herbage dry matter yields of grasses from the dairy slurry treatments equaled or exceeded yields from the inorganic fertilizer treatment. Stand ratings of grasses and alfalfa-grass mixtures were not changed by manure application rates. In this study, the highest rate of slurry ($967kg\;total\;N\;ha^{-1}$ in 1995 plus $2,014kg\;N\;ha^{-1}$ in 1996) was not detrimental to herbage yields or stand persistence of any of the species. It was concluded that applying dairy slurry to these cool-season grasses and alfalfa-grass mixtures managed in a 4-cutting system is an acceptable practice from the standpoint of herbage yield and satnd persistence and by doing so the utilization of inorganic fertilizers can be reduced.
Partially stabilized zirconia (PSZ) is an attractive material for thermal barrier coating. Zirconia exists in three crystallographic phases: cubic, tetragonal and monoclinic. Especially, the phase transformation of tetragonal phase to monoclinic phase accompanies significant volume expansion, so this transition generally results in cracking and contributes to the failure of the TBC system. Both the plasma sprayed ZrO$_2$-8Y$_2$O$_3$ (YSZ) coat and the ZrO$_2$,-25CeO$_2$,-2.5Y$_2$O$_3$ (CYSZ) coat are isothermally heat -treated at 130$0^{\circ}C$ and 150$0^{\circ}C$ for 100hr and cooled at different cooling rates. The monoclinic phase is not discovered in all the CYSZ annealed at 130$0^{\circ}C$ and 150$0^{\circ}C$. In the 150$0^{\circ}C$ heat-treated specimens, the YSZ contains some monoclinic phase while none exists in the 130$0^{\circ}C$ heat-treated YSZ coat. For the YSZ, the different phase transformation behaviors at the two temperatures are due to the stabilizer concentration of high temperature phases and grain growth. For the YSZ with 150$0^{\circ}C$-100hr annealing, the amount of monoclinic phase increased with the slower cooling rate. The extra oxygen vacancy, thermal stress, and c to t'phase transformation might suppress the t to m martensitic phase transformation.
In this study, the effects of two pre-treatment processes were observed prior to membrane filtration: pre-coagulation and pre-ozonation. To compare the effect of two above-mentioned pre-treatments, we adopted the four schemes: first one is direct membrane filtration of river surface water, second one is membrane filtration after pre-coagulation, third one is membrane filtration after pre-ozonation and fourth one is membrane filtration after pre-coagulation and pre-ozonation. There are two exceptional characteristics in applied processes. One is the usage of the MF membrane which has high ozone resisting characteristic. Therefore, ozone resides in membrane module during filtration. The other is adoption of Jet Mixed Separator (JMS) as coagulation-sedimentation process. The change in transmembrane pressure and permeate water quality were also examined. As a result, considering the filtration performance efficiency and permeate water quality, the process composed of filtration with combination of both pre-coagulation and pre-ozonation was proved most effective. The improved efficiency was due to the reduction of loading rate of fouling inducing materials to membrane module by coagulation process as well as variable reactions, such as degradation, particle destabilization and coagulation, occurred by residual ozone in membrane module. The additional effect of pre-coagulation before pre-ozonation is suppression of AOC, one of the by-products induced by ozonation. Therefore, combination of pre-coagulation and pre-ozonation is the effective process to overcome the major de-merit of ozonation i.e. by-products formation.
중합 박막 트랜지스터의 특성은 유기 반도체에 앞서 게이트유전체 표면의 화학적 변형에 의해 조절 가능하다. 화학적 처리는 자기조립 단분자막 형태의 유전물질과 함께 파생된 tantalum pentoxide($Ta_2O_5$) 표면으로 구성된다. Octadecyl trichlorosilane(OTS), hexamethyldisilazane (HMDS), aminopropyltreithoxysilane(ATS) 자기조립 단분자막의 성장은 중합체로 결합된 poly-3-hexylthiophene(P3HT)의 분위기에서 $0.01\sim0.06cm2/V{\cdot}s$의 이동도로 진행되었다. 이동도 향상 메커니즘은 중합체와 자기조립 단분자막 사이의 분자 상호작용에 영향을 미치는 것으로 확인하였다. 이는 향후 ploymer TFT의 유전박막 중 하나로서 유용하게 사용 될 것이다.
A heterojunction $SnS_2/p-Si$ photodetector was fabricated by RF magnetron sputtering system. $SnS_2$ was formed with 2-inch $SnS_2$ target. Al was applied as the front and the back metal contacts. Rapid thermal process was conducted at $500^{\circ}C$ to enhance the contact quality. 2D material such as $SnS_2$, MoS2 is very attractive in various fields such as field effect transistors (FET), photovoltaic fields such as photovoltaic devices, optical sensors and gas sensors. 2D material can play a significant role in the development of high performance sensors, especially due to the advantages of large surface area, nanoscale thickness and easy surface treatment. Especially, $SnS_2$ has a indirect bandgap in the single and bulk states and its value is 2 eV-2.6 eV which is considerably larger than that of the other 2D material. The large bandgap of $SnS_2$ offers the advantage for the large on-off current ratio and low leakage current. The $SnS_2/p-Si$ photodetector clearly shows the current rectification when the thickness of $SnS_2$ is 80 nm compared to when it is 135 nm. The highest photocurrent is $19.73{\mu}A$ at the wavelength of 740 nm with $SnS_2$ thickness of 80 nm. The combination of 2D materials with Si may enhance the Si photoelectric device performance with controlling the thickness of 2D layer.
Tewfik, Shadia R.;Sorour, Mohamed H.;Shaalan, Hayam F.;Hani, Heba A.
Membrane and Water Treatment
/
제9권1호
/
pp.43-51
/
2018
Hollow fiber (HF) membranes are gaining wide interest over flat membranes due to their compaction and high area to surface volume ratio. This work addresses the fabrication of HF from polysulfone (PS) and polyethersulfone (PES) using N-methylpyrrolidone (NMP) as solvent in addition to other additives to achieve desired characteristics. The semi-pilot spinning system includes jacketed vessel, four spinneret block, coagulation and washing baths in addition to dryer and winder. Different parameters affecting dry-wet spinning phase inversion process were investigated. Dope compositions of PES, NMP and polyvinyl pyrrolidone (PVP) of varying molecular weights as additive were addressed. Some critical parameters of importance were also investigated. Those include dope flow rate, air gap, coagulation & washing baths and drying temperatures. The measured dope viscosity was in the range from 1.7 to 36.5 Pa.s. Air gap distance was adjusted from 20 to 45 cm and coagulation bath temperature from 20 to $46^{\circ}C$. The HF membranes were characterized by scanning electron microscope (SEM), atomic force microscope (AFM) and mechanical properties. Results indicated prevalence of finger like structure and average surface roughness from about 29 to 78.3 nm. Profile of stress strain characteristics revealed suitability of the fibers for downstream interventions for fabrication of thin film composite membrane. Different empirical correlations were formulated which enable deeper understanding of the interaction of the above mentioned variables. Data of pure water permeability (PWP) confirmed that the fabricated samples fall within the microfiltration (MF)-ultrafiltration (UF) range of membrane separation.
수중 부유입자의 효과적인 제거 방안을 모색하고자 $CaCO_3$로 구성된 부유물의 계면화학적 특성을 고찰하였다. pH에 따른 전기영동도 측정에서는 수중 $OH^-$의 작용으로 pH가 상승함에 따라 electrokinetic potential은 음의 방향으로 변환하는 것으로 나타났다. 계면활성제는 부유물의 안정성에 영향을 끼치는 바, 계면활성제의 농도 및 전하에 따라 영향을 미치는 양상이 다르게 나타났다. 무기응집제의 경우에 있어서도 그 전하가 및 농도에 따라 부유물의 계면화학적 거동이 달라졌으며 이는 DLVO 이론에 의거하여 작성된 potential energy의 변화추이와 관련하여 이론적으로 해석될 수 있었다. Non-specific adsorption은 전기이중층의 압축을 초래하여 electrokinetic potential의 절대값 감소를 야기시켰으며 specific adsorption은 부유입자의 IEP 및 PZC가 상호 반대방향으로 이동하는 결과를 나타내었다.
본 웹사이트에 게시된 이메일 주소가 전자우편 수집 프로그램이나
그 밖의 기술적 장치를 이용하여 무단으로 수집되는 것을 거부하며,
이를 위반시 정보통신망법에 의해 형사 처벌됨을 유념하시기 바랍니다.
[게시일 2004년 10월 1일]
이용약관
제 1 장 총칙
제 1 조 (목적)
이 이용약관은 KoreaScience 홈페이지(이하 “당 사이트”)에서 제공하는 인터넷 서비스(이하 '서비스')의 가입조건 및 이용에 관한 제반 사항과 기타 필요한 사항을 구체적으로 규정함을 목적으로 합니다.
제 2 조 (용어의 정의)
① "이용자"라 함은 당 사이트에 접속하여 이 약관에 따라 당 사이트가 제공하는 서비스를 받는 회원 및 비회원을
말합니다.
② "회원"이라 함은 서비스를 이용하기 위하여 당 사이트에 개인정보를 제공하여 아이디(ID)와 비밀번호를 부여
받은 자를 말합니다.
③ "회원 아이디(ID)"라 함은 회원의 식별 및 서비스 이용을 위하여 자신이 선정한 문자 및 숫자의 조합을
말합니다.
④ "비밀번호(패스워드)"라 함은 회원이 자신의 비밀보호를 위하여 선정한 문자 및 숫자의 조합을 말합니다.
제 3 조 (이용약관의 효력 및 변경)
① 이 약관은 당 사이트에 게시하거나 기타의 방법으로 회원에게 공지함으로써 효력이 발생합니다.
② 당 사이트는 이 약관을 개정할 경우에 적용일자 및 개정사유를 명시하여 현행 약관과 함께 당 사이트의
초기화면에 그 적용일자 7일 이전부터 적용일자 전일까지 공지합니다. 다만, 회원에게 불리하게 약관내용을
변경하는 경우에는 최소한 30일 이상의 사전 유예기간을 두고 공지합니다. 이 경우 당 사이트는 개정 전
내용과 개정 후 내용을 명확하게 비교하여 이용자가 알기 쉽도록 표시합니다.
제 4 조(약관 외 준칙)
① 이 약관은 당 사이트가 제공하는 서비스에 관한 이용안내와 함께 적용됩니다.
② 이 약관에 명시되지 아니한 사항은 관계법령의 규정이 적용됩니다.
제 2 장 이용계약의 체결
제 5 조 (이용계약의 성립 등)
① 이용계약은 이용고객이 당 사이트가 정한 약관에 「동의합니다」를 선택하고, 당 사이트가 정한
온라인신청양식을 작성하여 서비스 이용을 신청한 후, 당 사이트가 이를 승낙함으로써 성립합니다.
② 제1항의 승낙은 당 사이트가 제공하는 과학기술정보검색, 맞춤정보, 서지정보 등 다른 서비스의 이용승낙을
포함합니다.
제 6 조 (회원가입)
서비스를 이용하고자 하는 고객은 당 사이트에서 정한 회원가입양식에 개인정보를 기재하여 가입을 하여야 합니다.
제 7 조 (개인정보의 보호 및 사용)
당 사이트는 관계법령이 정하는 바에 따라 회원 등록정보를 포함한 회원의 개인정보를 보호하기 위해 노력합니다. 회원 개인정보의 보호 및 사용에 대해서는 관련법령 및 당 사이트의 개인정보 보호정책이 적용됩니다.
제 8 조 (이용 신청의 승낙과 제한)
① 당 사이트는 제6조의 규정에 의한 이용신청고객에 대하여 서비스 이용을 승낙합니다.
② 당 사이트는 아래사항에 해당하는 경우에 대해서 승낙하지 아니 합니다.
- 이용계약 신청서의 내용을 허위로 기재한 경우
- 기타 규정한 제반사항을 위반하며 신청하는 경우
제 9 조 (회원 ID 부여 및 변경 등)
① 당 사이트는 이용고객에 대하여 약관에 정하는 바에 따라 자신이 선정한 회원 ID를 부여합니다.
② 회원 ID는 원칙적으로 변경이 불가하며 부득이한 사유로 인하여 변경 하고자 하는 경우에는 해당 ID를
해지하고 재가입해야 합니다.
③ 기타 회원 개인정보 관리 및 변경 등에 관한 사항은 서비스별 안내에 정하는 바에 의합니다.
제 3 장 계약 당사자의 의무
제 10 조 (KISTI의 의무)
① 당 사이트는 이용고객이 희망한 서비스 제공 개시일에 특별한 사정이 없는 한 서비스를 이용할 수 있도록
하여야 합니다.
② 당 사이트는 개인정보 보호를 위해 보안시스템을 구축하며 개인정보 보호정책을 공시하고 준수합니다.
③ 당 사이트는 회원으로부터 제기되는 의견이나 불만이 정당하다고 객관적으로 인정될 경우에는 적절한 절차를
거쳐 즉시 처리하여야 합니다. 다만, 즉시 처리가 곤란한 경우는 회원에게 그 사유와 처리일정을 통보하여야
합니다.
제 11 조 (회원의 의무)
① 이용자는 회원가입 신청 또는 회원정보 변경 시 실명으로 모든 사항을 사실에 근거하여 작성하여야 하며,
허위 또는 타인의 정보를 등록할 경우 일체의 권리를 주장할 수 없습니다.
② 당 사이트가 관계법령 및 개인정보 보호정책에 의거하여 그 책임을 지는 경우를 제외하고 회원에게 부여된
ID의 비밀번호 관리소홀, 부정사용에 의하여 발생하는 모든 결과에 대한 책임은 회원에게 있습니다.
③ 회원은 당 사이트 및 제 3자의 지적 재산권을 침해해서는 안 됩니다.
제 4 장 서비스의 이용
제 12 조 (서비스 이용 시간)
① 서비스 이용은 당 사이트의 업무상 또는 기술상 특별한 지장이 없는 한 연중무휴, 1일 24시간 운영을
원칙으로 합니다. 단, 당 사이트는 시스템 정기점검, 증설 및 교체를 위해 당 사이트가 정한 날이나 시간에
서비스를 일시 중단할 수 있으며, 예정되어 있는 작업으로 인한 서비스 일시중단은 당 사이트 홈페이지를
통해 사전에 공지합니다.
② 당 사이트는 서비스를 특정범위로 분할하여 각 범위별로 이용가능시간을 별도로 지정할 수 있습니다. 다만
이 경우 그 내용을 공지합니다.
제 13 조 (홈페이지 저작권)
① NDSL에서 제공하는 모든 저작물의 저작권은 원저작자에게 있으며, KISTI는 복제/배포/전송권을 확보하고
있습니다.
② NDSL에서 제공하는 콘텐츠를 상업적 및 기타 영리목적으로 복제/배포/전송할 경우 사전에 KISTI의 허락을
받아야 합니다.
③ NDSL에서 제공하는 콘텐츠를 보도, 비평, 교육, 연구 등을 위하여 정당한 범위 안에서 공정한 관행에
합치되게 인용할 수 있습니다.
④ NDSL에서 제공하는 콘텐츠를 무단 복제, 전송, 배포 기타 저작권법에 위반되는 방법으로 이용할 경우
저작권법 제136조에 따라 5년 이하의 징역 또는 5천만 원 이하의 벌금에 처해질 수 있습니다.
제 14 조 (유료서비스)
① 당 사이트 및 협력기관이 정한 유료서비스(원문복사 등)는 별도로 정해진 바에 따르며, 변경사항은 시행 전에
당 사이트 홈페이지를 통하여 회원에게 공지합니다.
② 유료서비스를 이용하려는 회원은 정해진 요금체계에 따라 요금을 납부해야 합니다.
제 5 장 계약 해지 및 이용 제한
제 15 조 (계약 해지)
회원이 이용계약을 해지하고자 하는 때에는 [가입해지] 메뉴를 이용해 직접 해지해야 합니다.
제 16 조 (서비스 이용제한)
① 당 사이트는 회원이 서비스 이용내용에 있어서 본 약관 제 11조 내용을 위반하거나, 다음 각 호에 해당하는
경우 서비스 이용을 제한할 수 있습니다.
- 2년 이상 서비스를 이용한 적이 없는 경우
- 기타 정상적인 서비스 운영에 방해가 될 경우
② 상기 이용제한 규정에 따라 서비스를 이용하는 회원에게 서비스 이용에 대하여 별도 공지 없이 서비스 이용의
일시정지, 이용계약 해지 할 수 있습니다.
제 17 조 (전자우편주소 수집 금지)
회원은 전자우편주소 추출기 등을 이용하여 전자우편주소를 수집 또는 제3자에게 제공할 수 없습니다.
제 6 장 손해배상 및 기타사항
제 18 조 (손해배상)
당 사이트는 무료로 제공되는 서비스와 관련하여 회원에게 어떠한 손해가 발생하더라도 당 사이트가 고의 또는 과실로 인한 손해발생을 제외하고는 이에 대하여 책임을 부담하지 아니합니다.
제 19 조 (관할 법원)
서비스 이용으로 발생한 분쟁에 대해 소송이 제기되는 경우 민사 소송법상의 관할 법원에 제기합니다.
[부 칙]
1. (시행일) 이 약관은 2016년 9월 5일부터 적용되며, 종전 약관은 본 약관으로 대체되며, 개정된 약관의 적용일 이전 가입자도 개정된 약관의 적용을 받습니다.