• 한국막학회:학술대회논문집
• /
• 한국막학회 2001년도 국제 Workshop:상수원의 현황과 분리막 상수처리(Water Resource and Menbrane Water Treatment)
• /
• pp.155-162
• /
• 2001

Advanced drinking water production systems, which not only good quality product water, but also provide easy management and mainenance of facilities, and operate on a smaller site area, have been expected to be developed for some time. We are going ahead with a program to deveop an advanced drinking water production system, using immersed membrane filtration combined with biological activated carbon, to meet the need described above. The demonstration plant tests been conducted with surface water from the Yodo-river since Dec. 1998 to measure treatment performance, reliability, and controllability of the system. The quality of product water has consistently remained at a very high level for about 2 years under controlled conditions. Results showed that the re-circulation granular biological activated carbon could suppress the increase of membrane pressure difference and promote a reduction of dissolved organic matter. (This work has been conducted along the ACT21 Programs.)

• 한국염색가공학회지
• /
• 제20권6호
• /
• pp.26-34
• /
• 2008

Wool fabric having high moisture content were treated with fluorocarbon-based water and oil repellent finishing agents by pad-dry-cure system. Three types of finishing agents which were regular-type or nano-type were adapted to compare the surface chemical composition, water and oil repellent property, crease recovery angle, and durability to repeated laundering. From the surface chemical compositions resulted by ESCA and C1s curve-fitting, it was shown that the regular-type finishing agent were easily taken off from the finished wool fabrics after repeated laundering. On the other hand, the fluoroalkyl groups of nano-type finishing agents turned round from fabric surface to fiber internal after repeated laundering. The water repellency of the wool fabrics treated with regular-type agent had a little changes according to the treatment condition changes and sharply decreased with repeated laundering. However, these values when treated with nano-type agents increased with the concentration and cure temperature and were maintained after 20 times laundering. The wool fabrics treated with nano-type agent had a great oil repellency irrespective of treatment conditions. Furthermore, the wrinkle recovery values of the wool fabrics treated with nano-type agents were higher than those of the fabrics treated with regular-type agent and were unchanged after 20 times laundering.

• 한국양식학회지
• /
• 제16권2호
• /
• pp.76-83
• /
• 2003

본 연구에서는 상향류식 연속 역세여과 연구를 통하여 양어장 순환수 처리 후 박테리아 및 바이러스 등을 효과적으로 처리하는 기술 개발과 여과사에 금속염을 코팅시켜 생물막의 형성을 도모하는 연구를 수행하였다. 여과사를 코팅한 경우 중성 pH에서 zeta potential 양(+)이 됨을 알 수 있었고 zeta potential이 양(+)에 근접할수록 column test에서 바이러스 제거효율이 증가함을 알 수 있었다. 따라서 여과사를 금속염으로 코팅을 하는 경우가 안한 경우 보다 음이온을 띤 부유물 제거에 탁월한 효능이 있음을 보여주었다. pH에 따른 여과재료의 흡착율에서 Al coating과 Al+Fe coating은 반응 시간 30분까지 효과적으로 흡착이 일어나는 것을 볼수 있었고 이 후의 반응시간에서 파과 곡선형태를 보여주었다. 회분식 형태로 운영한 여과재료를 이용한 탈착실험에서 Non, Al, Fe및 Al+Fe coating모두에서 pH 9.95에서 용출(leaching)되는 농도가 가장 높았으며 각각의 농도는 7.47, 4.80, 20.89 및 7.23 mg/L로 각각 나타났다. 이번 연구에서 Al coating의 경우 pH에 따른 영향은 거의 나타나지 않았으며, pH가 증가함에 따라 약간 감소하는 것을 알수 있었고 Fe coating에서는 pH의 영항이 없었으며, Al+Fe coating에서는 pH가 증가함에 따라 탁도도 역시 일정하게 증가하는 것으로 나타났다.

• 대한치과보철학회지
• /
• 제52권2호
• /
• pp.121-127
• /
• 2014

광범위한 보철 수복 치료는 수복 부위별로 다양한 고려 요소를 필요로 한다. 특히, 상악 전치부의 교합 계획은 다른 부위보다 더 많은 지식과 기술을 요한다. 전방 유도(anterior guidance)를 결정하는 상악 전치부 설면 외형을 제대로 형성하지 못하면, 기능적인 불편감과 함께 전체 치열의 불안정성을 야기한다. 임시 수복물 장착한 상태에서 적절한 조정을 통해 조화로운 전방 유도를 얻었다면 임시 수복물의 설면 형태를 최종 보철물로 정확하게 구현하는 방법에 주의를 기울여야 한다. 본 증례에서는 CAD/CAM (computer-aided design / computer-aided manufacturing) 시스템의 복제 기법을 활용하여 지대치의 디지털 이미지와 임시수복물의 디지털 이미지를 중첩시켜 보다 간편하게 보철물 형태를 복제하였다. 기존의 방법에 비해 술자는 진료실 시간을 줄일 수 있고, 환자는 기능과 심미 모두 만족할 만한 결과를 얻어 이를 보고하고자 한다.

• 접착 및 계면
• /
• 제2권3호
• /
• pp.1-8
• /
• 2001

${\gamma}$-APS (${\gamma}$-aminopropyltriethoxysilane)로 표면처리된 천연제올라이트와 에폭시 수지 복합 재료의 표면 자유 에너지, 인상강도 및 계면 모폴로지에 대해 연구하였다. 표면처리하지 천연제올라이트의 표면 자유에너지 성분 중에서 무극성 성분인 Lifshitz-van der Waals 성분, ${\gamma}{\frac{LW}{SV}}$는 $19.22mJ/m^2$이었고, 극성 성분인 Lewis acid-base 성분, ${\gamma}{\frac{AB}{SV}}$는 $15.27mJ/m^2$이 있다. ${\gamma}$-APS의 처리농도가 증가함에 따라 ${\gamma}{\frac{LW}{SV}}$값은 증가하였지만 ${\gamma}{\frac{AB}{SV}}$는 감소하였으며, 이는 ${\gamma}$-APS의 소수성 성분인 알킬기의 영향이 친수성 기인 아민이나 수산기의 영향보다 커지기 때문이다. 인장강도와 Young율은 ${\gamma}$-APS 처리에 의해 개선되었으며, SEM 분석에 의해 계면특성이 향상되었음을 확인하였다.

• Elastomers and Composites
• /
• 제45권1호
• /
• pp.2-6
• /
• 2010

탄소섬유/나일론 수지 복합재료의 계면결합력의 향상을 위해 폴리아크릴로니트릴(PAN)계 탄소섬유의 표면에 실란계, 설파이드계, 이미드계 계면결합제를 이용해서 사이징 처리를 수행하였으며, 사이징 처리된 탄소섬유의 젖음성과 표면자유에너지는 접촉각을 통해 확인하였다. 사이징 처리되어 제조된 복합재료의 기계적 계면물성은 임계응력세기인자를 통하여 확인하였으며, 파단실험 후 파단면은 주사전자현미경을 통해 관찰하였다. 실험결과 실란계로 사이징 처리된 탄소섬유가 다른 사이징 처리에 비해 표면자유에너지가 큰 것을 접촉각 측정을 통해 관찰하였다. 한편 사이징 처리된 탄소섬유 강화 나일론 복합재의 경우 미처리 탄소섬유를 이용한 복합재에 비해 높은 기계적 계면강도를 보였다. 이러한 결과는 섬유의 표면자유에너지가 탄소섬유와 나일론6 기지 사이의 계면결합력의 증대를 유도하여 복합재료의 기계적 계면강도가 증가된 것으로 판단된다.

• Korean Chemical Engineering Research
• /
• 제51권3호
• /
• pp.352-357
• /
• 2013

본 연구에서는 정수장 슬러지를 사용하여 제조한 정수슬러지 가공 분말의 압출공정을 통해서 입상흡착제를 제조하였다. 바인더 첨가와 소성과정이 입상형 흡착제의 물리 화학적 특성에 미치는 영향을 질소흡착, 압축강도, 주사전자현미경, 엑스선회절, 피리딘흡착 적외선분광법 등으로 분석하였다. 바인더의 함량을 5 wt%까지 증가시키면 압축강도가 3배 이상으로 개선되었으나 트리메틸아민을 흡착할 수 있는 표면적이 30% 정도 감소하여 입상흡착제의 트리메틸아민 파과시간이 단축되었다. 성형된 입상흡착제의 소성과정을 통해서 표면에 브뢴스테드산점과 루이스산점으로 구성된 산점이 발현되어, 염기성 기체인 트리메틸아민의 파과 시간이 3배 이상으로 증가하였다.

• Journal of Yeungnam Medical Science
• /
• 제36권1호
• /
• pp.43-49
• /
• 2019

Background: In the osseointegration of dental implants, the implant surface properties have been reported to be some of the most important critical factors. The effect of implant's surfaces created by resorbable blast media (RBM) followed by laser ablation on bone tissue reactions was examined using the removal torque test and histomorphometric analysis. Methods: Two types of dental implants, RBM-laser implants (experimental group) and RBM implants (control group) (CSM implant system, Daegu, Korea; L=6 mm, diameter=3.75 mm) were placed into the right and left distal femoral metaphysis of 17 adult rabbits. Six weeks after placement, removal torque was measured and histomorphometric analysis was performed. Results: The mean removal torque was $24.0{\pm}10.2Ncm$ and $46.6{\pm}16.4Ncm$ for the control and test specimens, respectively. The experimental RBM-laser implants had significantly higher removal torque values than the control RBM implants (p=0.013). The mean values of total and cortical bone to implant contact (BIC) were respectively $46.3{\pm}10.8%$ and $65.3{\pm}12.5%$ for the experimental group, and $41.9{\pm}18.5%$ and $57.6{\pm}10.6%$ for the control group. The experimental RBM-laser implants showed a higher degree of total and cortical BIC compared with RBM implants, but there was no statistical significance (p=0.482, 0.225). Conclusion: The removal torque and BIC of the test group were higher than those of the control group. In this study, the surface treatment created by RBM treatment followed by laser ablation appears to have a potential in improving bone tissue reactions of dental implants.

• 한국의류산업학회지
• /
• 제12권5호
• /
• pp.676-682
• /
• 2010

Superior hydrophilic properties will allow varieties of polyester(PET) fiber materials, fabrics and industrial materials a broader scope of use. The purpose of this study was to investigate the effect of water-absorbent softener treatment on the end-use properties and the hand of polyester knitted fabrics. Two different fabrics were knitted for the summer ladies' outwear; PET jersey and PET mesh. Variables were softner treatment and stitch type(jersey and mesh). Mechanical properties of the fabric samples were measured by KES-FB system. From these, primary hand values(HV) were evaluated by the conversion equation (KW-403-KTU) and the total hand value(T.H.V.) was calculated according to the KN-304 Summer. Both water-absorbent softner treatment and stitch types affected mechanical properties and hand values of PET fabrics. Mesh were thicker than single jersey stitch. As they became thicker, tensile, shear, and compressional energy increased. It appeared that coefficient of friction of mesh stitch was larger than that of single jersey stitch. The coefficient of friction and the mean deviation of surface roughness were decreased by softener treatment. After softner treatment KOSHI and SHARI of the both PET jersey and PET mesh decreased. However, FUKURAMI values of PET jersey increased and that of PET mesh decreased. The T.H.V. of the treated PET jersey was lower than that of the untreated one, while the T.H.V. of the treated PET mesh was higher than that of the untreated one. Overall T.H.V. of the single jersey was better than that of the mesh before and after softner treatment.

• Membrane and Water Treatment
• /
• 제14권2호
• /
• pp.85-93
• /
• 2023

Membrane separation is widely used for several applications such as water treatment, membrane reactors and climate change. Cross-linked organic-inorganic hybrid polyvinylidene fluoride (PVDF) / Tetraethyl orthosilicate (TEOS) was adopted for the preparation of optimized hollow membrane (HFM) for membrane distillation or other low pressure separators for mechanical properties and permeability under varying pretreatment schemes. HFMs were prepared on semi-pilot membrane fabrication system. Novel adopted post-treatment schemes involved soaking in glycerol, magnesium sulphate (MgSO₄), sodium hypochlorite (NaOCl), and isopropanol for different durations. All fibers were characterized for morphology using a scanning electron microscope (SEM), surface roughness using atomic force microscope (AFM), elemental composition by examining Energy Dispersive Spectroscopy (EDS), water contact angle (CA°) and porosity. The performance of the fibers was evaluated for pure water permeation flux (PWF). Post-treatment with MgSO₄ gave the highest both tensile modulus and flux. Assessment of properties and performance revealed comparable results with other organic-inorganic separators, HF or flat. In spite of few reported data on post treatment using MgSO₄ in presence of TEOS, this proves the potential of low cost treatment without negative impact on other membrane properties. The flux is also comparable with hypochlorite which manifests substantial precaution requirements in actual industrial use.The relatively high values of flux/bar for sample treated with TEOS, post treated with MgSO₄ and hypochlorite are 88 and 82 LMH/bar respectively.