• 한국연소학회:학술대회논문집
• /
• 2006.04a
• /
• pp.49-54
• /
• 2006

The present study conducted a numerical modeling on the diesel SCR (selective catalytic reduction) system using ammonia as a reductant over vanadium-based catalysts $(V_2O_5-WO_3/TiO_2)$. Transient modeling for ammonia adsorption/desorption on the catalyst surface was firstly carried out, and then the SCR reaction was modeled considering for it. In the current catalytic reaction model, we extended the pure chemical kinetic model based on laboratory-scale powdered-phase catalyst experiments to the chemico-physical one applicable to realistic commercial SCR reactors. To simulate multi-dimensional heat and mass transfer phenomena, the SCR reactor was modeled in two dimensional, axisymmetric domain using porous medium approach. Also, since diesel engines operate in transient mode, the present study employed an unsteady model. In addition, throughout simulations using the developed code, effects of space velocity on the DeNOx performance were investigated.

• Proceedings of the KIEE Conference
• /
• 2001.07c
• /
• pp.1349-1351
• /
• 2001

Polycrystalline diamond films are deposited by using a microwave plama CVC system, where the bias-enhanced nucleation (BEN) method is employed. Effects of the varying microwave power, the surface treatment by hydrogen plasma, and the cyclic hydrogen etching during deposition on the crystallinity as well as on the surface roughness of deposited films are examined by Raman spectroscopy, SEM, and AFM. A novel method for achieving a smoother diamond surface is also suggested through the indirect wafer bonding and back-side polishing.

• 한국정보디스플레이학회:학술대회논문집
• /
• 2002.08a
• /
• pp.689-691
• /
• 2002

Well-aligned multi-wall carbon nanotubes (MWCNTs) have been grown on both Coming glass and silicon substrates at about 400 $^{\circ}C$ by a modified plasma - enhanced chemical vapor deposition system. We have investigated laser irradiation effect on carbon nanotube surface by using an ultra - violet laser. The laser operated to modify structural defect of was carbon nanotube and to ablate possible contamination of carbon nanotube surface. The morphology and surface transformation of MWCNTs as analyzed by a SEM. In addition, the field emission measurement was also carried out in a vacuum chamber with a $10^{-7}$ Torr base pressure by applying bias voltages up to 1000V.

• Journal of the Korean Society for Precision Engineering
• /
• v.11 no.5
• /
• pp.124-133
• /
• 1994

Many of non-contact measuring systems are used to estimate surface characteristics owing to their advantages of high speed and undanaged test. In this paper, a new measuring system is proposed to acquire image from CCD camera through back light illumination. Lowpass filter is very useful in view of noise removal and optimum binary image can be made through histogram equalization which is one of the histogram technique to maximize brightness intensity between workpiece and background. Laplacian operator is used to detect workpiece edge from binary image. In case of image treatment applying Laplacian operator, surface roughness is calculated by introducing conversion coefficient for coordinate of pixel which edge is composed of. In summary, the work is concerned with the development of a new technique for roughness measurement by the image processing in turning.

• Journal of the Korean institute of surface engineering
• /
• v.57 no.2
• /
• pp.98-104
• /
• 2024

In order to overcome the urban heat island effect, highly functional paint is attracting attention as a promising means by shielding heat on the structure (building) surface. When a paint was prepared containing nano-sized silica particles, the heat-insulating performance was relatively higher than that of paints with other sizes. In addition, developed paints showed enhanced properties such as chemical resistance and abrasion resistance test because of the presence of nano-sized silica included in functional paint.

• Journal of Environmental Science International
• /
• v.1 no.2
• /
• pp.81.2-92
• /
• 1992

Growing algae spread over open water surface of water hyacinth system the leaves of hyacinth prevented the passage of sunlight through the water surface. The objectives of this study were to investigate the effects of the algae growth on the effluent of water hyacinth wastewater treatment systems operated with the variation of an organic loading rate between 190 to 550 kg COD/ha.day. The effluent from the system contained algae was discharged for about 2-3 weeks from the beginning of experimental operation of water hyacinth systems. BOD and 55 concentration of effluents during algae growthing periods were higher than those during the period of algae control. But nitrogen and phosphrous romoval efficiencies during in algae growthing periods were slighty higher than those during the period of algae control.

• Journal of Adhesion and Interface
• /
• v.4 no.2
• /
• pp.1-9
• /
• 2003

Epoxy-amine liquid prepolymers are extensively applied onto metallic substrates and cured to obtain painted materials or bonded joint structures. Overall performances of such systems depend on the created interphase between the organic layer and the substrate. When epoxy-amine liquid mixtures are applied onto more or less hydrated metallic oxide layer, concomitant amine chemical sorption and hydroxide dissolution appear lending to the chelate formation. As soon as the chelate concentration is higher than the solubility product, these species crystallize as sharp needles. Moreover, intrinsic and thermal residual stresses are developed within painted or bonded systems. When residual stresses are higher than the organic layer/substrate adhesion, buckling, blistering, debonding may occur leading to a catastrophic drop of system performances. Practical adhesion can be evaluated with either ultimate parameters (Fmax or Dmax) or the critical strain energy release rate, using the three point flexure test (ISO 14679-1997). We observe that, for the same system, the ultimate load decreases while residual stresses increase when the liquid/solid time increases. Ultimate loads and residual stresses depend on the metallic surface treatment. For these systems, the critical strain energy release rate which takes into account the residual stress profile and the Young's modulus gradient remains quite constant whatever the metallic surface treatment was. These variations will be discussed and correlate to the formation mechanisms of the interphase.

• Journal of the Korean Society for Heat Treatment
• /
• v.19 no.3
• /
• pp.163-169
• /
• 2006

Fretting is a kind of surface degradation mechanism observed in mechanical components and structures. The fretting damage decreases into 50-70% of the plain fatigue strength. The connecting rod for automobile has been used in special environments and various loading conditions. Failure of connecting rod in automotive engine may cause catastrophic situation. In this study, we investigated the fatigue characteristic of connecting rod material for an automobile. Fatigue life is defined as the number of cyclic stress to failure by regular cyclic stress. Fatigue life of C70S6 specimen was obtained from 134,000 to 147,000 cycles. Fatigue limit showed 432MPa by normal fatigue test. The other hands, it was 96MPa in the case of fretting fatigue test. It was extremely lower than that of a normal fatigue test. From observation of fracture surface, it was confirmed that the fatigue crack was initiated at the boundary of a specimen and bridge pad.

• Textile Coloration and Finishing
• /
• v.28 no.3
• /
• pp.189-194
• /
• 2016

The objectives of this research were to study the effect of salt-shrinkage finishing of silk on shrinkage degree and dyeing property of cochineal, and to investigate the efficacy of obtained results for imparting surface design effect on silk fabric. Ultimately it was aimed to suggest a technical process for developing natural dyed silk products with diverse design. Premordanted silk fabric was treated with $Ca(NO_3)_2$ solution(gravity: 1.45) at $90^{\circ}C$ for 1 min, washed, dried for further evaluation. The shrinkage of salt-treated fabric was calculated. The effects of salt treatment on the dye uptake of cochineal and colorfastness were investigated. The degrees of shrinkage were 10% and 3% for warp and weft, respectively. The salt treatment resulted in improving dye uptake of cochineal slightly. In addition, it improved colorfastness to washing and light. On the basis of the results, a technical process composed of premordanting, salt treatment and natural dyeing was suggested and using the process, two examples of textile design were presented. It can be concluded to impart various three dimensional surface design effect on silk fabric by applying salt-shrinkage finishing with combination of natural dyeing and mordanting.

• Journal of Fashion Business
• /
• v.12 no.6
• /
• pp.46-60
• /
• 2008

Lyocell is a regenerated cellulosic fiber manufactured by an environmentally friendly process. The major advantages of lyocell are the excellent drape forming property, the genuine bulkiness, smooth surface, and high dry/wet tenacities. However, one drawback of lyocell is its fibrillation property, which would degrade its aesthetic quality and lower the consumer satisfaction. In our previous studies, lyocell was treated with epichlorohydrin, a non-formalin based crosslinker, to reduce its fibrillation tendency. To investigate the changes of physical properties upon ECH-treatment, the hand characteristics of ECH-treated fabric were observed using KES-FB system and the 3D-virtual sewing image of the fabrics were obtained using 3D CAD simulation system in this study. Since epichlorohydrin(ECH) treatment was conducted in the alkaline medium, the weight reduction was observed in all treated lyocell. The treated lyocell became light, smooth and flexible in spite of ECH crosslinker application. LT and RT in tensile property upon the ECH treatment did not change significantly, however, EMT and WT in the tensile property increased. The significant decrease in bending rigidity was resulted in all ECH-treated lyocell, which is the result of the weight loss upon the alkali condition of ECH treatment. The bending rigidity increased again in the ECH 30% treated lyocell, however, the B value is still lower than the original. Therefore, the ECH-treated lyocell would be more stretchable and softer than the original. Shear rigidity was also decreased in all ECH-treated lyocell, which would result in more drape and body fitting when it is made as a garment. The ECH-treated fabric showed the softer smoother surface according to SMD value from KES evaluation. The virtual 3D sewing image of the ECH-treated lyocell did not show a significant change from that of the original except ECH 30% treated lyocell. ECH 30% treated lyocell showed a stiffer and more puckered image than the original.