• 대한용접접합학회:학술대회논문집
• /
• 대한용접접합학회 2010년도 춘계학술발표대회 초록집
• /
• pp.81-81
• /
• 2010

전자 패키징은 미세화, 경량화, 저가화를 지향하고 신뢰성의 향상을 위해 발전해 왔다. 이러한 경향은 전자부품 자체의 성능 향상 뿐 아니라 전자부품을 장착, 고정할 수 있게 하는 인쇄회로 기판(PCB : Printed Circuit Board)의 성능에 많은 관심을 가지게 되었다. 전기적 신호의 손실을 줄이기 위해 전기, 전자 산업체에서는 가볍고 굴곡성이 우수한 연성인쇄회로기판(FPCB : Flexible PCB)과 가격이 싸고 신뢰성이 입증된 경성인쇄회로기판(RPCB : Rigid PCB)이 그 대상이다. 본 논문에서는 이 PCB중에서도 RPCB와 FPCB간의 열압착 방식으로 접합 시 전극간의 접합 양상을 보았다. 이 열압착 방식은 기존에 PCB를 접합하는데 사용하고 있는 connector를 이용한 체결법을 대체하는 기술로써 솔더를 중간층(interlayer)로 이용하여 열과 압력으로 접합하는 방식이다. 이 방식을 connector를 사용하는 방식에 비해 그 부피가 작고 I/O개수에 크게 영향 받지 않으며 자동화 공정이 쉬운 장점을 가지고 있다. 접합의 대상 중 RPCB의 경우는 무전해 니켈 금도금(ENIG : Electroless Nickle Immersion Gold)로 제작하였으며 FPCB의 경우는 ENIG와 유기보호피막(OSP : Organic solderability preservation) 처리하였다. 실험에 사용한 PCB는 $300\;{\mu}m$ pitch의 미세피치이며 솔더의 조성은 Sn-3.0Ag-0.5Cu (in wt%)과 Sn-3.0Ag (in wt%)를 사용하였다. 접합 온도와 접합 시간 그리고 접합 압력에 따라 최적의 접합 조건을 도출하였다. 접합 강도는 $90^{\circ}$ Peel Test를 통해서 측정하였으며 접합면 및 파괴면은 SEM과 EDS를 통하여 분석하였다.

• 보존과학회지
• /
• 제35권3호
• /
• pp.253-258
• /
• 2019

우리나라에서 유일한 고려시대 금동제십일면천수관음보살좌상(金銅製十一面千手觀音菩薩坐像)을 대고려 특별전 전시를 위해 보존처리 하였다. 보존처리를 위해 성분분석(XRF)과 제작기법(CT)을 조사하였으며, 그 결과 관음보살상은 Cu-Sn-Pb 삼원계 청동으로 합금하였고, 들떠 있는 도금 층을 제외한 표면은 수은 아말감법으로 도금하였다. 관음보살상의 몸체와 좌 우측팔, 손목(지물을 든 손 포함)을 별도로 주조하여 붙였다. 특히 각각의 지물을 정교하게 표현하기 위하여 손목을 하나하나 별도로 주조하여 끼워서 철 못으로 고정하였다. 관음보살상 내부에는 5개의 철심[머리(2), 왼쪽 팔꿈치(1), 오른쪽 가슴(1), 오른쪽 허리(1)]이 확인되었다. 보존처리는 바탕 금속을 보호하고 들떠 있는 도금 층을 접착하기 위하여 천연접착제[우뭇가사리, 아교(20%)]와 알코올을 혼합하여 접착하였다. 관음보살상의 손상된 부분은 합성수지(CDK 520+SN-시트)를 사용하여 불상과 탈부착이 가능하도록 복원하였다. 재질 분석과 보존처리를 통하여 천수관음보살좌상의 안전한 상태로 연구와 전시에 활용할 수 있도록 하였다.

• 한국환경과학회:학술대회논문집
• /
• 한국환경과학회 1998년도 가을 학술발표회 프로그램
• /
• pp.2-4
• /
• 1998

Proliferation of Nocardia amarae cells in activated sludge has often been associated with the generation of nuisance foams. Despite intense research activities in recent years to examine the causes and control of Nocardia foaming in activated sludge, the foaming continued to persist throughout the activated sludge treatment plants in United States. In addition to causing various operational problems to treatment processes, the presence of Nocardia may have secondary effects on the fate of heavy metals that are not well known. For example, for treatment plants facing more stringent metal removal requirements, potential metal removal by Nocardia cells in foaming activated sludge would be a welcome secondary effect. In contrast, with new viosolid disposal regulations in place (Code o( Federal Regulation No. 503), higher concentration of metals in biosolids from foaming activated sludge could create management problems. The goal of this research was to investigate the metal sorption property of Nocardia amarae cells grown in batch reactors and in chemostat reactors. Specific surface area and metal sorption characteristics of N. amarae cells harvested at various growth stages were compared. Three metals examined in this study were copper, cadmium and nickel. Nocardia amarae strain (SRWTP isolate) used in this study was obtained from the University of California at Berkeley. The pure culture was grown in 4L batch reactor containing mineral salt medium with sodium acetate as the sole carbon source. In order to quantify the sorption of heavy metal ions to N amarae cell surfaces, cells from the batch reactor were harvested, washed, and suspended in 30mL centrifuge tubes. Metal sorption studies were conducted at pH 7.0 and ionlc strength of 10-2M. The sorption Isotherm showed that the cells harvested from the stationary and endogenous growth phase exhibited significantly higher metal sorption capacity than the cells from the exponential phase. The sequence of preferential uptake of metals by N. amarae cells was Cu>Cd>Ni. The specific surFace area of Nocardia cells was determined by a dye adsorption method. N.amarae cells growing at ewponential phase had significantly less specific surface area than that of stationary phase, indicating that the lower metal sorption capacity of Nocardia cells growing at exponential phase may be due to the lower specific surface area. The growth conditions of Nocardia cells in continuous culture affect their cell surface properties, thereby governing the adsorption capacity of heavy metal. The comparison of dye sorption isotherms for Nocardia cells growing at various growth rates revealed that the cell surface area increased with increasing sludge age, indicating that the cell surface area is highly dependent on the steady-state growth rate. The highest specific surface area of 199m21g was obtained from N.amarae cell harvested at 0.33 day-1 of growth rate. This result suggests that growth condition not only alters the structure of Nocardia cell wall but also affects the surface area, thus yielding more binding sites of metal removal. After reaching the steady-state condition at dilution rate, metal adsorption isotherms were used to determine the equilibrium distributions of metals between aqueous and Nocardia cell surfaces. The metal sorption capacity of Nocardia biomass harvested from 0.33 day-1 of growth rate was significantly higher than that of cells harvested from 0.5- and 1-day-1 operation, indicatng that N.amarae cells with a lower growth rate have higher sorpion capacity. This result was in close agreement with the trend observed from the batch study. To evaluate the effect of Nocardia cells on the metal binding capacity of activated sludge, specific surface area and metal sorption capacity of the mixture of Nocardia pure cultures and activated sludge biomass were determined by a series of batch experiments. The higher levels of Nocardia cells in the Nocardia-activated sludge samples resulted in the higher specific surface area, explaining the higher metal sorption sites by the mixed luquor samples containing greater amounts on Nocardia cells. The effect of Nocardia cells on the metal sorption capacity of activated sludge was evaluated by spiking an activated sludge sample with various amounts of pre culture Nocardia cells. The results of the Langmuir isotherm model fitted to the metal sorption by various mixtures of Nocardia and activated sludge indicated that the mixture containing higher Nocardia levels had higher metal adsorption capacity than the mixture containing lower Nocardia levels. At Nocardia levels above 100mg/g VSS, the metal sorption capacity of activate sludge increased proportionally with the amount of Noeardia cells present in the mixed liquor, indicating that the presence of Nocardia may increase the viosorption capacity of activated sludge.

• 한국산학기술학회논문지
• /
• 제17권9호
• /
• pp.718-723
• /
• 2016

중형 차량용 에어컨에 사용되는 스크롤 압축기는 토크변동이 적고 에너지 효율이 높으며, 소음이 적어 적용이 확대되어 가고 있다. 또한 경량화에 따라 압축기를 구성하는 주요부품이 스틸에서 알루미늄으로 변경하는 등 소재에 대한 연구가 활발히 이루어지고 있다. 또한 스크롤 압축기는 고정 스크롤과 선회 스크롤의 인벌루트 랩의 가공 정밀도가 $10{\mu}m$ 이하로 정밀도가 높은 전용장비와 전용 툴은 물론 숙련된 가공기술이 요구되므로 가공 품질을 확인하기 위하여 표면조도와 윤곽도를 측정하였으며, 알루미늄을 모재로하여 양극 산화 처리하여 사용되고 있는 선회스크롤의 경도를 향상시키기 위한 방법의 일환으로 봉공처리를 수행에 따른 특성들을 살펴보았다. 알루미늄 소재는 Al-Mg-Cu계 합금으로 미량의 Ni, Fe, Zn 이 부가된 것으로 나타났으며, 표면조도는 $3{\mu}m$이하로 가공 정밀도 기준 $10{\mu}m$를 만족하였다. 또한 양극산화 후 나노다이아몬드, CNT로 봉공처리 한 경우 경도는 450 이상으로 수봉공처리의 경우 보다 50% 이상 경도가 향상됨을 알 수 있었으며, 봉공재로 사용하기 위한 소재로서 탄소나노튜브나 나노다이아몬드는 큰 차이를 보이지 않았다.

• 한국토양비료학회지
• /
• 제34권1호
• /
• pp.33-41
• /
• 2001

강원도 동남부에 위치한 옥동천 상류에는 많은 양의 휴폐광산 폐기물이 적절한 처리시설이 없는 상태로 방치되어 있고, 이들이 유실되어 하류의 토양, 물 및 저니토를 중금속으로 오염시키고 있는 실정이다. 본 연구의 목적은 광미댐에 적치된 광미중에 존재하는 중금속의 분획물을 조사하고, 각 분획물의 오염도 지수를 평가하는데 있다. 광미댐에서 광미를 깊이별로 채취하여 물리화학적 특성을 분석하였다. 광미의 pH는 7.3~7.9였고, 총 질소와 유기물 함량은 각각 3.2~5.5% 및 1.3~9.1%의 범위에 있었다. 신광재댐 광미의 중금속함량은 구광재댐 광미보다 높은 편이었다. 광미에 존재하는 중금속 별 총 함량은 Zn > Cu > Pb > Ni > Cd순(順) 이었으며, 이들의 농도는 토양환경보전법에서 지정한 산업지역의 대책기준을 상회하고 있었으며, 천연부존량보다 높았다. 중금속 분획물의 상대적분포는 residual > organic > reducible > carbonate > adsorbed순(順) 이었다. 총 농도에 비교하여 생물유효성 분획물의 농도는 매우 낮은 편이었다. 광재댐의 깊이별 중금속의 농도는 중금속의 종류에 따라 상이했다. 광재댐 표충의 Cu 농도는 심층의 농도보다 높았다. 총 농도를 기준으로 할 때 각 중금속 분획물의 오염도 지수는 4.27~8.51 범위에 있었다. 생물유효성 분획물의 오염도지수는 비유효성 분획물의 오염도 지수보다 낮았다. 광미에 존재하는 중금속 분획물의 농도와 오염도 지수에 관한 결과를 통해 광미는 중금속으로 인해 심각하게 오염된 상태이며, 유실될 경우 하류의 토양과 물 환경에 악영향을 미칠 잠재성을 지니고 있다고 판단되었다. 광미댐으로부터 광미의 유실을 방지할 수 있는 대책이 시급히 필요한 실정이다.

• Bulletin of the Korean Chemical Society
• /
• 제24권2호
• /
• pp.173-177
• /
• 2003

The present work is focused on the preconcentration of nickel and its determination by means of diffuse reflection spectroscopy. The preconcentration of nickel was carried out by sorption on macroporous aminocarboxylic amphoteric resin ANKB-35. Based on this collector, a method to determine nickel in wastes of heat power industry was worked out using solid-phase spectroscopy. The colored surface compound to be determined was obtained by a preceding nickel sorption on the resin and by subsequent treatment of the concentrate obtained with definite amounts of 1-(2-pyridilazo)-2-naphtol (PAN). The Ni calibration curve is linear in the concentration range of 0.5-20.0 mg/L (sample volume is 200.0 mL) and the detection limit is 0.05 mg/L. The presence of $Cu^{2+},\;Fe^{3+},\;Co^{2+}$ ions as well as macrocomponents of natural water $(Na^+,\;K^+,\;Ca^{2+},\;Mg^{2+})$ do not hinder the solid-phase spectroscopy determination of nickel. The nickel determination by diffuse reflection spectroscopy was carried out in model solutions as well as in solutions obtained after the dissolution of wastes of heat power industry.

• 한국지하수토양환경학회:학술대회논문집
• /
• 한국지하수토양환경학회 2002년도 추계학술발표회
• /
• pp.75-80
• /
• 2002

Enormous volumes of mining wastes from the abandoned and closed mines are disposed without a proper treatment at Southeastern part of Kangwon Province. Erosion of these wastes contaminates soil, surface water, and sediments with heavy metals. Objectives of this research were to fractionate heavy metals in the mine waste and to assess the potential S. P. A. G.(Soil Pollution Assesment Guidance) of each metal fraction. Mine wastes analyzed for physical and chemical properties. pH of wastes ranged from 3.3 to 8.0. Contents of total N and loss on ignition matter were in the ranges of 0.2~5.6%, and 0.8~15.3%, respectively. Heavy metals in the wastes were higher in the coal mines than those in the other mine wastes. Total concentrations of metals in the wastes were in the orders of Pb > Zn > Cu > Cd, exceeded the corrective action level of the Soil Environment Conservation Law and higher than the natural abundance levels reported from uncontaminated soils. Relative distribution of heavy metal fractions was residual > organic > reducible > carbonate > adsorbed, reversing the degree of metal bioavailability. Mobile fractions of metals were relatively small compared to the total concentrations. Soil Pollution Assesment Guidance(SPAG) values were ranged from 0.08 to 9.14 based on labile fraction of metal concentrations. SPAG values of labile concentration were lower than those of total concentration.

• 한국주조공학회지
• /
• 제12권6호
• /
• pp.442-449
• /
• 1992

Grey cast iron containing a small amount of Cu and Mo to improve the effect of heat treatment and microstructure were cast and them austenitized. After austenitizing the specimens of castings were austempered at 250$^{\circ}C$, 300$^{\circ}C$ and 350$^{\circ}C$. The effects of matrix structures on mechanical properties and fracture characteristics at the different austempering temperature were investigated. Tensile strength, hardness and impact toughness of austempered grey cast iron showed maximum valve 359 MPa, 321 HB, 3.9 CVN respectively at the lowest austempering temperature, 250$^{\circ}C$. $K_{IC}$ of gref cast iron at a austempering temperature, 250$^{\circ}C$, showed maximum 44 MPa.$m^{1/2}$ even though the amount of retained austenite in it is only 16%. This mainly comes from the refinement of the retained austenite. Quasi-cleavage pattern with a little fit of fibrous pattern was shown on the fractured surface of austempered grey cast iron at all of the temperatures tested.

• 한국물환경학회지
• /
• 제22권4호
• /
• pp.666-671
• /
• 2006

Effects of a rainfall event (July 28, 2005) on the hydrochemical characteristics of the Jungrang river, the biggest tributary of the Han river, was investigated. Significant spatial variations in the hydrochemical characteristics were observed. At JR2 location, concentrations of T-N and T-P were relatively low indicating occurrence of active oxidation in the stepped drop structure. At JR3 location, concentrations of Na, K, Cl, $NH_4-N$ and EC were elevated suggesting increased discharge from the nearby waste-water treatment plant and tributaries. The rain event diluted major dissolved ion concentrations in the river by 12~52%. The $NO_3-N$ levels were preserved during the rain then increased about twofold after rainfall, suggesting increased discharge of nitrate-contaminated groundwater. Heavy metals including Cd, Co, Cr, Cu and Pb were not detected in all water samples and the leachates from surface sediment samples. Concentrations of Fe, Mn, Al and Zn were below the Korean Drinking Water Guideline. Results of this study suggested that establishment of water-quality monitoring protocols describing temporal and spatial variations in parameters sensitive to rainfall events, relatively steady factors, and contaminant sources is required.

• 한국의류산업학회지
• /
• 제20권2호
• /
• pp.210-218
• /
• 2018

The natural dye product market is expanding due to the recent interest in environmentally friendly products. This study examines dyeing using natural Coptidis Rhizoma. Chitosan and Tannin was treated to improve dyeability of Coptidis Rhizoma after finding the proper dyeing condition. In addition, dyeing characteristics were compared according to mordant types along with the mordanting methods for dye fixing and color change. The results indicated that the optimum dyeing condition was to treat the concentration of 5% (o.w.b.) at $80^{\circ}C$ for 90 minutes. By the chitosan and tannin treatments, K/S value of cotton fabrics by 3 times and those of wool fabrics by 2 times increased and color depthing of dyed fabrics was achieved after 2 cycles repetition. To improve dyeability, iron mordanting was most effective; in addition, the K/S Value of pre-mordanting fabrics versus post-mordanting fabrics increased the most. The color of the surface was changed to reddish yellow when Sn, Cu mordanting, and to greenish blue when Fe mordanting. The lightfastness of dyeing fabric with mordanting was weak at 1-2 grades, but the washing fastness was good for 4 grades and the rubbing fastness and sweat fastness were as good as those of the 3-4 grades. As a result, this study could help improve the dyeability of expensive Coptidis Rhizoma.