• Journal of Welding and Joining
• /
• 제33권1호
• /
• pp.49-53
• /
• 2015

An experimental study was conducted to investigate the effect of carbon nanotubes on the zinc corrosion resistance of sealing layer formed on the Tungsten Carbide spray coating. Using the nanotubes, a sealing agent in the form of solid-liquid suspensions was made and applied to the surface of spray coating. A series of experiments, consisted of three stages such as preparation of test piece, molten-pot immersion test, and evaluation of micro structure, were undertaken to demonstrate complicated interaction existing between zinc ions and sealing layer containing the nanotubes. Experimental results showed newly developed sealing layer were less susceptible to corrosion and thus coated layer was well protected even in the case of 10 days exposure. Comparison of the micro structure after molten pot test also indicated that carbon nanotubes still remained in the matrix and organized more reliable frame work constituted with boron nitride and chromium compound. It was revealed that carbon nanotubes in the sealing layer played positive role to enhance zinc corrosion resistance in the perspective of both fibrous structure and inherent chemical stability.

• 대한용접접합학회:학술대회논문집
• /
• 대한용접접합학회 2002년도 Proceedings of the International Welding/Joining Conference-Korea
• /
• pp.53-58
• /
• 2002

Electrical insulation and mechanical properties of the plasma sprayed oxide ceramic coatings were studied before and after the sealing treatment of the ceramic coatings. Plasma sprayed A1$_2$O$_3$-TiO$_2$ coating as the reference coating was sealed using three commercial sealants based on polymer. Penetration depth of the sealants to the ceramic coating was evaluated directly from the optical microscope using a fluorescent dye. It is estimated that the penetration depth of the sealants to the ceramic coating is from 0.2 to 0.5 mm depending on the sealants used. The preliminary test results with a DC puncture tester imply that the dielectric breakdown voltage mechanism of plasma sprayed ceramic coatings has been determined to be a corona mechanism. Dielectric breakdown voltage of the as-sprayed and as-ground samples have shown a linear trend with regard to the thickness showing an average dielectric strength of 20 kV/mm for the thickness scale studied. It is also shown that grinding the coating before sealing and adding fluorescent dye do not agent the penetration depth of sealants. All of the microhardness, two-body abrasive wear resistance, bond strength, and surface roughness of the ceramic coating after the sealing treatment are improved. The extent of improvement is different from the sealants used. However, three-point bending stress of the ceramic coating after the sealing treatment is decreased. This is attributed to the reduced micro-crack toughening effect since the cracks propagate easily through the lamellar of the coating without crack deflection and/or branching after the sealing treatment.

• 한국세라믹학회지
• /
• 제20권1호
• /
• pp.70-78
• /
• 1983

This paper discusses the application of Si-Borosilicate glass sealing to a new sealing method which utilizes a large electrostatic field to pormote bound formation at relatively low temperature. Bonding mechanism and the effect of bonding time bonding temperature glass thickness and surface roughness on the bond strength were investigated. Application of a de voltage across bonded specimen gradually produced a layer of glass adjacent silicon which was depleted of mobile ions. As a consequence a n increasingly larger fraction of the applied voltage appeared across the depleted region and very large electric field resulted This field accompanyed by large electrostatic force acted as driving force the of strong bond. And stronger bond was formed with increasing bonding time and temperature. A low temperature preoxidation is advantageous for the Si surface having a rougher surface finish that 1 microinch.

• 한국표면공학회:학술대회논문집
• /
• 한국표면공학회 2012년도 추계총회 및 학술대회 논문집
• /
• pp.97-97
• /
• 2012

• Tribology and Lubricants
• /
• 제14권3호
• /
• pp.32-38
• /
• 1998

This paper presents the magnetic flux distributions of a ferrofluid seal at the sealing gap between the pole pieces and the rotating shaft. The optimized shape of pole pieces has been determined by using the computer simulations. The computed results indicate that the sloped pole piece of 27$^{\circ}$ shows good flux distributions compared with that of the conventional flat pole pieces and may reduce frictional heats due to a reduced surface contact areas of magnetic fluids.

• 한국정보디스플레이학회:학술대회논문집
• /
• 한국정보디스플레이학회 2004년도 Asia Display / IMID 04
• /
• pp.866-869
• /
• 2004

A carbon nanotube field emission display(CNT FED) panel with a 2 inch diagonal size was fabricated by using a screen printing of a prepared photo-sensitive CNT paste and vacuum in-line sealing technology. After a surface treatment of the patterned CNT, only the carbon nanotube tips are uniformly exposed on the surface. The diameter of the exposed CNTs are usually about 20nm. The sealing temperature of the panel was around 390 $^{\circ}C$ and the vacuum level was obtained with $1.4{\times}10^{-5}$torr at the sealing. The field emission properties of the diode type CNT FED panel were characterized Now, we are developing a triode type CNT FED with a self-aligned gate-emitter structure.

• 한국건설관리학회:학술대회논문집
• /
• 한국건설관리학회 2002년도 학술대회지
• /
• pp.539-542
• /
• 2002

도로면 유지보수를 시행함에 있어 노면의 파손정도에 따라 다양한 공법의 사용이 가능하나 크랙 실링 공법은 예방적 차원에서 도로면에 발생된 크랙을 초기에 효과적으로 보수할 수 있는 방법이다. 그러나, 교통량이 많은 대도시나 고속도로에서 시행되는 도로면 유지보수 작업의 경우 노무자가 열악한 작업환경 내에서 작업을 수행해야 하므로 안전성 확보에 문제가 있고, 도로면 유지보수 작업의 특성상 현장 노무자의 잦은 이직(labor turnover) 및 3D업종의 기피로 인한 숙련공 부족현상은 현 도로면 유지보수 작업의 생산성 및 품질 저하를 가져오고 있다. 선진 외국의 경우 크랙 실링 공법의 이점 및 도로 유지보수 공사의 위험 요소를 인식하여 자동화 장비의 개발을 통한 안전성, 생산성 향상 및 경제성 확보에 다양한 연구 노력을 기울이고 있으나, 국내의 경우 도로면 유지보수 공사를 위한 기술축적이나 자동화 장비 개발을 위한 시도는 매우 미약한 실정이다. 따라서, 본 연구에서는 도로면 유지보수 공법 중 크랙 실링 공법의 자동화를 통해 노무자의 안전사고를 방지하고, 품질 및 생산성 향상을 도모할 수 있는 크랙 실링 자동화 방안을 제시하고자 한다.

• 한국건설관리학회논문집
• /
• 제5권2호
• /
• pp.162-171
• /
• 2004

도로면 유지보수를 시행함에 있어 노면의 파손정도에 따라 다양한 공법의 사용이 가능하나 크랙실링 공법은 예방적 차원에서 도로면에 발생된 크랙을 초기에 효과적으로 보수할 수 있는 방법이다. 그러나 교통량이 많은 대도시나 고속도로에서 시행되는 도로면 유지보수 작업의 경우 노무자가 열악한 작업환경 내에서 작업을 수행해야 하므로 안전성 확보에 문제가 있는 것으로 분석되었다. 또한, 도로면 유지보수 작업의 특성상 현장 노무자의 잦은 이직(labor turnover) 및 3D업종의 기피로 인한 숙련공 부족현상은 현 도로면 유지보수 작업의 생산성 및 품질 저하를 가져오고 있다. 선진 외국의 경우 크랙실링 공법의 이점 및 도로 유지보수 공사의 위험 요소를 인식하여 자동화 장비의 개발을 통해 안전성 및 생산성 향상, 경제성 확보에 다양한 연구 노력을 기울이고 있으나 국내의 경우 도로면 유지보수 공사를 위한 기술축적이나 자동화 장비 개발을 위한 시도는 매우 미약한 실정이다. 따라서, 본 연구에서는 도로면 유지보수 공법 중 크랙실링 공법의 자동화를 통해 노무자의 안전사고를 방지하고, 품질 및 생산성 향상을 도모할 수 있는 크랙실링 자동화 장비의 프로토타입을 개발하고자 한다.

• 한국세라믹학회지
• /
• 제11권1호
• /
• pp.3-9
• /
• 1974

The role of added metal oxide in the adherence mechanism of low melting glass to several metal plates such as oxygen free high conducting copper, low carbon steel, chrominum galvanized on copper, and stainless steel was investigated. The metal oxide which added to glass were cupric oxide, ferric oxide, chromic oxide, and stainless steel oxide. The glass to that various metla oxide were added, sealed with several metal plates in the electric furnace at $650^{\circ}C$ for 5 minutes. The results as follows; 1) The interfacial reaction was promoted and strong chemical bonding with glass and metals by which the surface energy was decreased showed excellent sealing by addition of metal oxide. 2) When the interfacial reaction of glass and metals was promoted by addition of metal oxide found out that various adhernece mechanism were related to the sealing. 3) When the amount of metal oxide addition was 3-5% the excellent sealing was achieved.

• Nuclear Engineering and Technology
• /
• 제44권1호
• /
• pp.89-102
• /
• 2012

The buffer and backfill are important components of the engineered barrier system in a high-level waste repository, which should be constructed in a hard rock formation at a depth of several hundred meters below the ground surface. The primary function of the buffer and backfill is to seal the underground excavation as a preferred flow path for radionuclide migration from the deposited high-level waste. This study investigates the hydraulic conductivity and swelling pressure of Kyungju Ca-bentonite, which is the candidate material for the buffer and backfill in the Korean reference high-level waste disposal system. The factors that influence the hydraulic conductivity and swelling pressure of the buffer and backfill are analyzed. The factors considered are the dry density, the temperature, the sand content, the salinity and the organic carbon content. The possibility of deterioration in the sealing performance of the buffer and backfill is also assessed.