• Korean Journal of Environmental Agriculture
• /
• v.16 no.2
• /
• pp.156-160
• /
• 1997

The combination of biological wastewater treatment process and membrane separation has many advantages such as better effluent quality and system stability over the conventional biological wastewater treatment process. In this study, direct membrane separation using nonwoven fabric was applied to biological wastewater treatment. A nonwoven fabric module was submerged in the aerated bioreactor. And accumulated biomass in the bioreactor was separated by suction. The system was operated with various condition to investigate pollutant removal efficiencies and flux. After formation of biomass layer on nonwoven fabric surface, a day, the stable effluent water quality was obtained. The flux decreased at a high suction pressure faster than a low pressure. The stable flux was obtained at the pressure of $21{\sim}25cmHg$. In spite of variation of hydraulic retention time, organic loading rate, the removal efficiencies of BOD, $COD_{Cr}$. $COD_{Mn}$ were very high as follows : $95.2%(0.14{\sim}0.97\;BODKg/m^3/day)$, $86.0%(0.17{\sim}1.39\;COD_{Cr}Kg/m^3/day)$, $90.0%(0.097{\sim}0.61\;COD_{Mn}Kg/m^3/day)$.

• Economic and Environmental Geology
• /
• v.53 no.2
• /
• pp.213-220
• /
• 2020

When CO₂ foam is injected into the saline aquifer, the relative permeability of CO₂ decreases and its viscosity increases, thereby reducing mobility in porous media and ultimately improving CO₂ storge with enhanced sweep efficiency. In general, surfactants were used to fabricate CO₂ foam. Recently, nanoparticles have been used to form stable foam than surfactant. This paper introduces CO₂ storage technology using nanoparticle stabilized CO₂ foam. If the surface of the hydrophilic nanoparticles is partially modified into a CO₂-philic portion, the particles have an affinity for CO₂ and water, thus forming a stable CO₂ foam even in deep saline aquifers under high temperature and high salinity conditions, thereby it can be stored in the pores of the rock. In terms of economics, injection method using nanopaticle-stabilized CO₂ foam is more expensive than the conventional CO₂ injection, but it is estimated that it will have price competitiveness because the injection efficiency is improved. From an environmental point of view, it is possible to inject chemical substances such as surfactants and nanomaterials into aquifers or reservoirs for specific purposes such as pollutant removal and oil production. However, some studies have shown that nanoparticles and surfactants are toxic to aquatic animals, so environmentally proven substances should be used. Therefore, further research and development will be needed to study the production and injection of nanoparticle-stabilized CO₂ foam that are environmentally safe and economically reasonable.

• Journal of Korean Society of Environmental Engineers
• /
• v.37 no.9
• /
• pp.517-525
• /
• 2015

This study analyzes water quality change trends in three major rivers in Daejeon and effect of discharge from Daejeon Wastewater Treatment Plant between 1992 and 2014. As of 2014, COD concentration in the Gab-cheon-A station is in level VI for Korea river water quality standard while BOD and TP are in level III. As expansions of the treatment plant, water quality in the Gab-cheon River has been improving accordingly. However, during the study period, TN concentrations of the headwater and the most downstream locations of the Gab-cheon River have increased about twice and three times, respectively. It was estimated that the treatment plant is responsible for 35%. 46%, 76% and 63% of BOD, COD, TN and TP loadings of the Gab-cheon River, respectively. It was also estimated that small tributaries and nonpoint sources are responsible for 54% and 47% of BOD and COD loadings of the Gab-cheon River. Therefore, it is recommended to further reduce nutrient loadings from the treatment plant and also reduce surface runoff organic loading from nonpoint sources including small tributaries and storm sewers.

• Journal of the Korean Society for Marine Environment & Energy
• /
• v.8 no.3
• /
• pp.148-157
• /
• 2005

In order to understand distribution characteristics and pollution of heavy metals in the artificial Lake Shihwa in the vicinity of Kyunggi Bay in relation with huge environmental changes, various environmental samples including seawaters, surface sediments and settling particulate matters were collected from Lake Shihwa in 2004. Due to extreme pollutant discharge from various anthropogenic sources such as the Banweol and Shihwa Industrial Complexes and cities, the highest metal concentrations in the samples such as waters, sediments and settling particulate matter were found in inner part of the lake. High metal contents (Cu, Zn and Hg) in sediments were observed at Sts. 2-4 and 9. The contents of Cr, Co, Ni, Cu, Zn and Pb in SPMs were high at St. 5 and low in the outer part of the lake. Spatial distribution of heavy metals were mainly controlled various biogeochemical factors and physical mixing as well as input of industrial and municipal wastewaters. Although tile environmental qualities of heavy metals in the lake have been improved partially due to inflow of outer seawater, it is not clear to reach a good environmental quality. Therefore, further environmental programs should be conducted continuously for environmental improvement.

• Journal of the Korea Organic Resources Recycling Association
• /
• v.23 no.2
• /
• pp.53-60
• /
• 2015

Newly, nutrients recovery by bioconversion in the swine waste which caused serious problems due to its high organic fraction and content of nutrients such as phosphorus and nitrogen is viewed as a considerable approach since it produces valuable product as well as recycling of resources. Consequently, it is necessary to find new methods to treat swine waste. One possible solution to this problem is to use this potential pollutant as a growth substrate for economically valuable products. The study for the fundamental improvement of bioconversion efficiency by finding optimum growth conditions using statistical models and biotechnology was performed. A novel approach to utilize swine waste by cultivating mycelia of the mushroom Phellinus linteus are described. A central composite face-centered design (CCF) for the experiments was used to develop empirical model providing a quantitative interpretation of the relationships among the three variables, which were substrate concentration, pH, and temperature. The maximal radial extension rate (2.78mm/d) of P.linteus was determined under the condition of 5.0 g COD/L, pH 5.0, and temperature $29.7^{\circ}C$. The results of this study suggest that swine waste could be utilized as a growth substrate for the cultivation of mushroom mycelia enhancing an efficiency of utilizing this by-product of the livestock industry.

• Korean Journal of Soil Science and Fertilizer
• /
• v.45 no.5
• /
• pp.671-675
• /
• 2012

This study was conducted to establish the BMPs (Best Management Practices) for preventing pollutant loadings from paddy rice field applied livestock liquid manure from 2008 through 2011. Cultivated paddy rice fields (Gyeonggi province, Korea) were treated with SCB (Slurry composting and bio-filtration process) liquid fertilizer. The BMPs for paddy rice field developed in this study includes: 1) the controlling a drainage water gate in paddy rice field from right after SCB liquid fertilizer application to 3 weeks after rice transplanting; 2) livestock liquid fertilizer application to paddy rice soils in 20 days before rice transplanting to encourage the utilization of liquid fertilizer; 3) preservation of surface water depth to 5 cm in a paddy field right after SCB liquid fertilizer applied to minimize a water pollution and enhance the utilization of liquid fertilizer; and 4) blocking a water gate at least for 2 days to inactivate E. coli survival. The findings of this study will provide useful and practical guideline to applicators of agricultural soil in deciding appropriate handling and time frames for preventing pollution of water quality for sustainable agriculture.

• Journal of Environmental Science International
• /
• v.22 no.6
• /
• pp.745-759
• /
• 2013

The characteristics of meteorological conditions and air pollution were investigated in a valley city (Yangsan) on bad visibility days (from 05:00 to 09:00 LST) of the cold half year (November 2008 to April 2009). This analysis was performed using the hourly observed data of meteorological variables (temperature, wind speed and direction, relative humidity, and 2 m and 10 m temperature) and air pollutants ($NO_2$, $SO_2$, $PM_{10}$, and $O_3$). In addition, visibility data based on visual measurements and a visibility meter were used. The bad visibility days were classified into four types: fog, mist, haze, and the mixture (mist+haze). The results showed that the bad visibility days of the four types in the valley city were observed to be more frequently (about 50% of the total study period (99 days except for missing data)) than (27%) those near coastal metropolitan city (Busan). The misty days (39%) in the valley city were the most dominant followed by the hazy (37%), mixture (14%), and foggy days (10%). The visibility degradation on the misty days in Yangsan was closely related to the combined effect of high-level relative humidity due to the accumulation of water vapor from various sources (e.g. river, stream, and vegetation) and strong inversion due to the development of surface radiative cooling within the valley. On the hazy days, the visibility was mainly reduced by the increase in air pollutant (except for $O_3$) concentrations from the dense emission sources under local conditions of weaker winds from the day before and stronger inversion than the misty days. The concentrations of $NO_2$, $PM_{10}$, and $SO_2$ (up to +36 ppb, $+25{\mu}g/m^3$, and +7 ppb) on the hazy days were a factor of 1.4-2.3 higher than those (+25 ppb, $+14{\mu}g/m^3$, and +3 ppb) on the misty days.

• Journal of Environmental Science International
• /
• v.20 no.12
• /
• pp.1647-1661
• /
• 2011

The Government had devised legislation of Special Act and drew up guidelines for improving air quality in Seoul Metropolitan area. In 2007 local government of Seoul, Incheon and Gyeonggi conducted the results of application policy by reduced air pollutants emission for the first time. Although there was reduction of air pollutant emission in each local government, it was ineffective as expected using air pollution monitoring database. Therefore we worked out a way to prepare modeling input data using the results of enforcement plan. And we simulated surface $NO_2$ and PM10 before and after decrease in air pollutants emission and examine reduction effects of air pollution according to enforcement regulation except other influence, by using MM5-SMOKE-CMAQ system. Each local government calculated the amount of emission reduction under application policy, and we developed to prepare input data so as to apply to SMOKE system using emission reduction of enforcement plan. Distribution factor of emission reduction were classified into detailed source and fuel codes using code mapping method in order to allocate the decreased emission. The code mapping method also included a way to allocate spatial distribution by CAPSS distribution. According to predicted result using the reduction of NOx emission, $NO_2$ concentration was decreased from 19.1 ppb to 18.0 ppb in Seoul. In Gyeonggi and Incheon $NO^2$ concentrations were down to 0.65 ppb and 0.68 ppb after application of enforcement plan. PM10 concentration was reduced from 18.2 ${\mu}g/m^3$ to 17.5 ${\mu}g/m^3$ in Seoul. In Gyeonggi PM10 concentration was down to 0.51 ${\mu}g/m^3$ and in Incheon PM10 concentration was decreased about 0.47 ${\mu}g/m^3$ which was the lower concentration than any other cities.

• Korean journal of applied entomology
• /
• v.18 no.1 s.38
• /
• pp.43-48
• /
• 1979

This study was conducted to detect lead which is exhausted with gas from running automobiles and is considered to accumulate in cropping lands. Soil samples were taken from uplands and paddy fields with different distance from highways. atonic absorption spectrophotometer was applied for analysis. Results obtained are summarized as follows: 1. In the areas of Seoul toll gate and Jookjeon, Gyeonggi province, soils of fields within $3\~5$ meters from highway appeared to contain $11\~110\;ppm$ of lead. On the other hand, soils outside of $3\~5$ meters showed only natural background level of lead. 2. The maximum concentration of lead in Hwoedeuk area (Choong-nam p개vince) was 16.3 ppm and those of Kimhae and Dongrae areas were about 12 ppm. Low concentration of $1\~4\;ppm$ was observed in the areas, south of Daejeon along the Honam and Namhae highways. 3. Lead seemed to accumulate in the soil surface within the range of 0 to 5 centimeters which anable to expect little translocation to deeper layer of the soil. 4. lost of arable lands locates at least 15 meters apart from highways so that lead concentrations were lower than expected. No damage could be speculated with the present concentration of lead analyzed. This does not deny the necessity to the long term dectect of the possible pollutant.

• Journal of the Korean Ceramic Society
• /
• v.45 no.12
• /
• pp.839-844
• /
• 2008

$TiO_2$ is an environment-friendly semiconducting material, and it has photocatalytic and hydrophilic effect. There are a lot of reports on the photocatalytic characteristics of $TiO_2$, such as organic pollutants resolving, anti-bacterial, and self-purification material. In this paper, $TiO_2$ micron-sized powders were deposited on the glass by room temperature powder spray in vacuum process, so called aerosol deposition (AD), and nano-grained $TiO_2$ photocatalytic thin films were fabricated. The thickness of the films were controlled by changing the number of deposition cycle. Morphologies and characteristics of the AD-$TiO_2$ thin films were examined by SEM, TEM, XRD, and UV-Visible Spectrophotometer. As the thickness of $TiO_2$ films increased, surface roughness increased. By this increment, the reaction area between film and pollutant was enlarged, resulting in better photocatalytic property.